Flugzeuge

A replacement fuselage for the AVIOS Albatross V2, includes factory-applied decals, and water rudder.

Note: This is suitable for the Albatross V1, but of course, the colors will be different.

A replacement center wing section for the AVIOS Albatross V2, includes the 2 flaps.

Note: This is suitable for the Albatross V1, but of course, the colors will be different.

A replacement left-hand outer wing section for the AVIOS Albatross V2, includes decals, aileron, and aileron horn.

Note: This is suitable for the Albatross V1, but of course, the colors will be different.

A replacement right-hand outer wing section for the AVIOS Albatross V2, includes decals, aileron, and aileron horn.

Note: This is suitable for the Albatross V1, but of course, the colors will be different.

A replacement tail set for the AVIOS Albatross V2. This set includes the vertical and horizontal stabilizers, control horns, rudder, rudder servo with pushrod, and decals.

Note: This is suitable for the Albatross V1, but of course, the colors will be different.

A replacement canopy/cockpit hatch for the AVIOS Albatross V2, includes the clear window glazing.

Note: This is suitable for the Albatross V1, but of course, the colors will be different.

A replacement pair of engine/motor cowls for the AVIOS Albatross V2.

Note: These are suitable for the Albatross V1, but of course, the colors will be different.

A replacement pair of wing floats for the AVIOS Albatross V2.

Note: These are also suitable for the Albatross V1, but of course the colors are different.

A replacement clear water rudder with spring for the AVIOS Albatross V2.

Note: This is suitable for the Albatross V1 as well.

A replacement nose cone for the AVIOS Albatross V2.

Note: This is also suitable for the Albatross V1.

A replacement set of decals for the AVIOS Albatross V2 US Coast Guard Flying Boat. 

Der legendäre Excalibur wurde von Königen in einem fernen Reich geschmiedet und hat sich als eine Kraft erwiesen, mit der man rechnen muss. Es ist jetzt in einer aktualisierten Version erhältlich, die ein brandneues, auffälliges, gut sichtbares Farbschema, eine verbesserte Propellerbaugruppe, Servos mit Metallgetriebe und noch mehr Kohle- und Glasfaserverstärkung enthält. Der Excalibur V2 ist da! Sein innovatives Design zeichnet sich durch Dinge wie einen freitragenden, nach vorne gepfeilten Flügel, V-Heck-Heckflächen, eine unglaublich starke Konstruktion und atemberaubende Linien aus.

A replacement fuselage for the Excalibur V2 Hotliner/Slope Soarer, also suitable for the Excalibur V1.

A replacement decal set for the Excalibur V2 Hotliner/Slope Soarer, also suitable for the Excalibur V1.

A replacement wing set including wing joining spars for the Excalibur V2 Hotliner/Slope Soarer, also suitable for the Excalibur V1.

A replacement spinner and propeller hub assembly for the Excalibur V2 Hotliner/Slope Soarer, also suitable for the Excalibur V1.

A replacement pair of 13x8 folding propeller blades for the Excalibur V2 Hotliner/Slope Soarer, also suitable for the Excalibur V1.

A replacement set of pushrods, ball links, quick-keepers, nuts and bolts, and screws for the Excalibur V2 Hotliner/Slope Soarer, also suitable for the Excalibur V1.

A replacement pair of main landing gear retaining plates for the Durafly Tundra V2/V3 and Night Tundra.

Note: This replacement spare part for the Durafly Tundra V2 is not compatible with the Tundra V1.

„Learn to Fly the Tundra Way“ mit dem Prime Tundra PT1200. Dies ist eine weitere Ergänzung der äußerst beliebten Tundra-Serie von STOL-Flugzeugen (Short Take-Off and Landing) von Durafly, aber dieses hier richtet sich in erster Linie, aber nicht ausschließlich an Anfänger. Der PT1200 ist der perfekte STOL-Trainer für diejenigen, die in diesen Flugstil einsteigen möchten, da er die hervorragenden STOL-Flugeigenschaften der Tundra-Linie erbt und auch erfahrenen Tundra-Fans viel Spaß macht!

A replacement pre-painted fuselage for the Durafly Prime Tundra PT1200 STOL Trainer-Sports Model.

A replacement main wing with pre-hinged ailerons for the Durafly Prime Tundra PT1200 STOL Trainer-Sports Model.

A replacement horizontal stabilizer with elevator, and carbon spar for the Durafly Prime Tundra PT1200 STOL Trainer-Sports Model.

A replacement pre-painted canopy for the Durafly Prime Tundra PT1200 STOL Trainer-Sports Model.

A replacement pre-painted FPV canopy/mount for the Durafly Prime Tundra PT1200 STOL Trainer-Sports Model.

A replacement 10x6 propeller for the Durafly Prime Tundra PT1200 STOL Trainer-Sports Model.

A replacement pre-painted motor cowl for the Durafly Prime Tundra PT1200 STOL Trainer-Sports Model.

One pair of replacement main wheels for the Durafly Prime Tundra PT1200 STOL Trainer-Sports Model.

Please note:  These wheels are also suitable for the other Tundra series of STOL models except the Grand Tundra.

Diameter: 120mm

A replacement linkage and screw set for the Durafly Prime Tundra PT1200 STOL Trainer-Sports Model.

One pair of replacement wing struts for the Durafly Prime Tundra PT1200 STOL Trainer-Sports Model.

A replacement propeller adapter for the Durafly Prime Tundra PT1200 STOL Trainer-Sports Model.

A replacement 3025-1000kV brushless motor for the Durafly Prime Tundra PT1200 STOL Trainer-Sports Model.

A replacement ORX 3-Axis gyro for the Durafly Prime Tundra PT1200 STOL Trainer-Sports Model.

Features:
• Gyro stability for roll, pitch, and yaw
• Small and lightweight
• Easy set-up
• 3 modes: Gyro off/Gyro on/Trainer mode

Gyro off means no stabilization from the gyro at all. Gyro on gives some gyro stability and full control surface deflection. Trainer mode gives a lot more gyro stability, and also limits the amount of control deflection, will also self-right the model to a normal flying attitude.

A complete replacement decal set for the Durafly Prime Tundra PT1200 STOL Trainer-Sports Model.

A complete set of floats including a water rudder for the Durafly Prime Tundra PT1200 STOL Trainer-Sports Model. Take your flying to the next level and have loads of fun flying from your favorite lake or waterway. This set includes everything that is necessary to convert your Prime Tundra to a floatplane.

Features:
• The perfect addition for your Prime Tundra
• Made of tough EPO foam
• Includes a water rudder for improved steering whilst taxying
• Includes mounting hardware and decal set
• Very quick and easy to fit

Included:
1 x Pair of EPO floats
1 x Front mounting strut
1 x Rear mounting strut
2 x Cross braces
1 x Water rudder
1 x Decal set