Controladores Eletrônicos de Velocidade

The Turnigy Plush-32 brushless ESC comes with a 32-bit ARM controller which offers higher resolution, makes it quicker, smoother, and more responsive to your throttle inputs. As you would expect, all the Turnigy Plush-32 are manufactured to the same high-quality standards that you have come to expect with all the Turnigy Plush ESCs.

Now with the updated Rev1.1.0 firmware, these speed controllers offer a few more programming options over previous models. These include motor type, spool-up acceleration, PWM frequency, beacon delay, and an adjustable BEC (this is only available on the 150A). Most of these revisions are self-explanatory but the "Beacon Delay" does require an explanation. The "Beacon Delay" is quite a unique function that will cause the ESC to start "beeping" after a predetermined delay of not using the throttle stick, this can be set via the program card. The loud beeping noise is perfect for finding your model if it gets lost in high grass, standing crops, or in the bush, etc. Please note that you can use your existing Plush 32 programming card but you will not be able to access the revised functions unless you purchase the new Rev1.1.0 programming card.

The Turnigy Plush-32 brushless ESC comes with a 32-bit ARM controller which offers higher resolution, makes it quicker, smoother, and more responsive to your throttle inputs. As you would expect, all the Turnigy Plush-32 are manufactured to the same high-quality standards that you have come to expect with all the Turnigy Plush ESCs.

Now with the updated Rev1.1.0 firmware, these speed controllers offer a few more programming options over previous models. These include motor type, spool-up acceleration, PWM frequency, beacon delay, and an adjustable BEC (this is only available on the 150A). Most of these revisions are self-explanatory but the "Beacon Delay" does require an explanation. The "Beacon Delay" is quite a unique function that will cause the ESC to start "beeping" after a predetermined delay of not using the throttle stick, this can be set via the program card. The loud beeping noise is perfect for finding your model if it gets lost in high grass, standing crops, or in the bush, etc. Please note that you can use your existing Plush 32 programming card but you will not be able to access the revised functions unless you purchase the new Rev1.1.0 programming card.

The Turnigy Plush-32 brushless ESC comes with a 32-bit ARM controller which offers higher resolution, makes it quicker, smoother, and more responsive to your throttle inputs. As you would expect, all the Turnigy Plush-32 are manufactured to the same high-quality standards that you have come to expect with all the Turnigy Plush ESCs.

Now with the updated Rev1.1.0 firmware, these speed controllers offer a few more programming options over previous models. These include motor type, spool-up acceleration, PWM frequency, beacon delay, and an adjustable BEC (this is only available on the 150A). Most of these revisions are self-explanatory but the "Beacon Delay" does require an explanation. The "Beacon Delay" is quite a unique function that will cause the ESC to start "beeping" after a predetermined delay of not using the throttle stick, this can be set via the program card. The loud beeping noise is perfect for finding your model if it gets lost in high grass, standing crops, or in the bush, etc. Please note that you can use your existing Plush 32 programming card but you will not be able to access the revised functions unless you purchase the new Rev1.1.0 programming card.

The Turnigy Plush-32 brushless ESC comes with a 32-bit ARM controller which offers higher resolution, makes it quicker, smoother, and more responsive to your throttle inputs. As you would expect, all the Turnigy Plush-32 are manufactured to the same high-quality standards that you have come to expect with all the Turnigy Plush ESCs.

Now with the updated Rev1.1.0 firmware, these speed controllers offer a few more programming options over previous models. These include motor type, spool-up acceleration, PWM frequency, beacon delay, and an adjustable BEC (this is only available on the 150A). Most of these revisions are self-explanatory but the "Beacon Delay" does require an explanation. The "Beacon Delay" is quite a unique function that will cause the ESC to start "beeping" after a predetermined delay of not using the throttle stick, this can be set via the program card. The loud beeping noise is perfect for finding your model if it gets lost in high grass, standing crops, or in the bush, etc. Please note that you can use your existing Plush 32 programming card but you will not be able to access the revised functions unless you purchase the new Rev1.1.0 programming card.

The Turnigy Plush-32 brushless ESC comes with a 32-bit ARM controller which offers higher resolution, makes it quicker, smoother, and more responsive to your throttle inputs. As you would expect, all the Turnigy Plush-32 are manufactured to the same high-quality standards that you have come to expect with all the Turnigy Plush ESCs.

Now with the updated Rev1.1.0 firmware, these speed controllers offer a few more programming options over previous models. These include motor type, spool-up acceleration, PWM frequency, beacon delay, and an adjustable BEC (this is only available on the 150A). Most of these revisions are self-explanatory but the "Beacon Delay" does require an explanation. The "Beacon Delay" is quite a unique function that will cause the ESC to start "beeping" after a predetermined delay of not using the throttle stick, this can be set via the program card. The loud beeping noise is perfect for finding your model if it gets lost in high grass, standing crops, or in the bush, etc. Please note that you can use your existing Plush 32 programming card but you will not be able to access the revised functions unless you purchase the new Rev1.1.0 programming card.

The Turnigy Plush-32 brushless ESC comes with a 32-bit ARM controller which offers higher resolution, makes it quicker, smoother, and more responsive to your throttle inputs. As you would expect, all the Turnigy Plush-32 are manufactured to the same high-quality standards that you have come to expect with all the Turnigy Plush ESCs.

Now with the updated Rev1.1.0 firmware, these speed controllers offer a few more programming options over previous models. These include motor type, spool-up acceleration, PWM frequency, beacon delay, and an adjustable BEC (this is only available on the 150A). Most of these revisions are self-explanatory but the "Beacon Delay" does require an explanation. The "Beacon Delay" is quite a unique function that will cause the ESC to start "beeping" after a predetermined delay of not using the throttle stick, this can be set via the program card. The loud beeping noise is perfect for finding your model if it gets lost in high grass, standing crops, or in the bush, etc. Please note that you can use your existing Plush 32 programming card but you will not be able to access the revised functions unless you purchase the new Rev1.1.0 programming card.

The Turnigy Plush-32 brushless ESC comes with a 32-bit ARM controller which offers higher resolution, makes it quicker, smoother, and more responsive to your throttle inputs. As you would expect, all the Turnigy Plush-32 are manufactured to the same high-quality standards that you have come to expect with all the Turnigy Plush ESCs.

Now with the updated Rev1.1.0 firmware, these speed controllers offer a few more programming options over previous models. These include motor type, spool-up acceleration, PWM frequency, beacon delay, and an adjustable BEC (this is only available on the 150A). Most of these revisions are self-explanatory but the "Beacon Delay" does require an explanation. The "Beacon Delay" is quite a unique function that will cause the ESC to start "beeping" after a predetermined delay of not using the throttle stick, this can be set via the program card. The loud beeping noise is perfect for finding your model if it gets lost in high grass, standing crops, or in the bush, etc. Please note that you can use your existing Plush 32 programming card but you will not be able to access the revised functions unless you purchase the new Rev1.1.0 programming card.

The Aerostar RVS G2 next-generation range of brushless speed controllers moves up a notch from the ground-breaking original Aerostar RVS ESCs. They are more compact, lighter, and process faster due to high-performance 32bit technology, have improved functionality and programmable features, and an upgraded, high-amp SBEC system. New generation MOSFETs ensure that the ESC stays within operating temperatures, and can also safely handle the peak current draw specified. Our RVS (reverse function system) is now instantaneous, with no need for the motor to stop turning, this makes it perfect for EDF braking (reverse thrust), and waterplanes for taxiing, etc. If you don't require the reverse function, simply do not connect the second lead to your receiver, it will then operate as a standard ESC.

The Aerostar RVS G2 next-generation range of brushless speed controllers moves up a notch from the ground-breaking original Aerostar RVS ESCs. They are more compact, lighter, and process faster due to high-performance 32bit technology, have improved functionality and programmable features, and an upgraded, high-amp SBEC system. New generation MOSFETs ensure that the ESC stays within operating temperatures, and can also safely handle the peak current draw specified. Our RVS (reverse function system) is now instantaneous, with no need for the motor to stop turning, this makes it perfect for EDF braking (reverse thrust), and waterplanes for taxiing, etc. If you don't require the reverse function, simply do not connect the second lead to your receiver, it will then operate as a standard ESC.

The Aerostar RVS G2 next-generation range of brushless speed controllers moves up a notch from the ground-breaking original Aerostar RVS ESCs. They are more compact, lighter, and process faster due to high-performance 32bit technology, have improved functionality and programmable features, and an upgraded, high-amp SBEC system. New generation MOSFETs ensure that the ESC stays within operating temperatures, and can also safely handle the peak current draw specified. Our RVS (reverse function system) is now instantaneous, with no need for the motor to stop turning, this makes it perfect for EDF braking (reverse thrust), and waterplanes for taxiing, etc. If you don't require the reverse function, simply do not connect the second lead to your receiver, it will then operate as a standard ESC.

The Aerostar RVS G2 next-generation range of brushless speed controllers moves up a notch from the ground-breaking original Aerostar RVS ESCs. They are more compact, lighter, and process faster due to high-performance 32bit technology, have improved functionality and programmable features, and an upgraded, high-amp SBEC system. New generation MOSFETs ensure that the ESC stays within operating temperatures, and can also safely handle the peak current draw specified. Our RVS (reverse function system) is now instantaneous, with no need for the motor to stop turning, this makes it perfect for EDF braking (reverse thrust), and waterplanes for taxiing, etc. If you don't require the reverse function, simply do not connect the second lead to your receiver, it will then operate as a standard ESC.

The Aerostar RVS G2 next-generation range of brushless speed controllers moves up a notch from the ground-breaking original Aerostar RVS ESCs. They are more compact, lighter, and process faster due to high-performance 32bit technology, have improved functionality and programmable features, and an upgraded, high-amp SBEC system. New generation MOSFETs ensure that the ESC stays within operating temperatures, and can also safely handle the peak current draw specified. Our RVS (reverse function system) is now instantaneous, with no need for the motor to stop turning, this makes it perfect for EDF braking (reverse thrust), and waterplanes for taxiing, etc. If you don't require the reverse function, simply do not connect the second lead to your receiver, it will then operate as a standard ESC.

The Aerostar RVS G2 next-generation range of HV Opto brushless speed controllers moves these amazing ESCs up a notch from the ground-breaking original Aerostar RVS HV ESCs. New generation MOSFETs with the aid of the highly efficient cooling fan and finned, aluminum heatsink, ensure that the ESC stays within operating temperatures at all times, and can also safely handle the peak current draw specified. They process much faster due to the high-performance 32bit M4 microprocessor running at 170MHz, and have improved functionality and programmable features. Our RVS (reverse function system) is now instantaneous, with no need for the motor to stop turning, this makes it perfect for EDF braking (reverse thrust), and waterplanes for taxiing, etc. If you don't require the reverse function, simply do not connect the second lead to your receiver, it will then operate as a standard ESC.

The Aerostar RVS G2 next-generation range of brushless speed controllers moves up a notch from the ground-breaking original Aerostar RVS ESCs. They are more compact, lighter, and process faster due to high-performance 32bit technology, have improved functionality and programmable features, and an upgraded, high-amp SBEC system. New generation MOSFETs ensure that the ESC stays within operating temperatures, and can also safely handle the peak current draw specified. Our RVS (reverse function system) is now instantaneous, with no need for the motor to stop turning, this makes it perfect for EDF braking (reverse thrust), and waterplanes for taxiing, etc. If you don't require the reverse function, simply do not connect the second lead to your receiver, it will then operate as a standard ESC.

Atualize seu rock crawler RC 1/18 de uma configuração de motor com escovas para essa combinação suave e potente de motor sem escovas com sensor e ESC. O motor sem escovas de qualidade adota um estator exclusivo de chapa de aço silício de 0,2 mm, rotor magnético à prova de explosão e produz uma potência máxima impressionante de 120 watts. O ESC especialmente projetado apresenta excelentes características de partida, aceleração e potência linear, além de controle inteligente de torque e velocidade em circuito fechado para um controle consistente das RPMs do motor sob todas as cargas.

The Hobbywing EZRUN MAX10 G2-140A ESC offers strong, explosive power, linear low-speed control, and a great sense of overall control for your 1/10 RC cars or trucks. With its upgraded, adjustable BEC system making it suitable for HV servos, and its water and dust-proofing to IP-67 standards, it's the perfect choice for all your race needs.

The Hobbywing EZRUN MAX10 G2-80A ESC offers strong, explosive power, linear low-speed control, and a great sense of overall control for your 1/10 RC car or truck. With its upgraded, adjustable BEC system making it suitable for HV servos, and its water and dust-proofing to IP-67 standards, it's the perfect choice for all your race needs.

The Hobbywing EZRUN COMBO-MAX10 G2-80A ESC and 3652SD-5400KV G3 brushless motor offer strong, explosive power, linear low-speed control, and a great sense of control for your 1/10 RC car.

The Hobbywing EZRUN COMBO-MAX10 G2-80A ESC and 3652SD-3300KV G3 brushless motor offer strong, explosive power, linear low-speed control, and a great sense of control for your 1/10 RC car.

The Hobbywing EZRUN COMBO-MAX10 G2-80A ESC and 3652SD-4100KV G3 brushless motor offer strong, explosive power, linear low-speed control, and a great sense of control for your 1/10th RC car.

The Hobbywing QUICRUN Fusion PRO 2300KV 540 sensored brushless motor with integrated 60A brushless ESC greatly reduces the overall size and weight of the conventional separate setup. It has been designed specifically for 1/10 crawlers and offers strong low-speed torque, extremely smooth running at low speeds, and is far superior to the common sensored brushless system that has gone before. This compact combo also includes a powerful, adjustable SBEC system (6~7.4V@6A) which makes it suitable for HV servos.

The Hobbywing QUICRUN 10BL60 60A sensored/sensorless brushless ESC for 1/10-1/12 cars and buggies offers high performance at a low price, it is extremely robust and reliable and is suitable for most types of competitive racing. Its compact size means it is suitable for a variety of car and buggy chassis, and it will auto-identify either sensored or sensorless brushless motors. The temperature of the ESC is kept within limits by the very efficient cooling fan that runs from the 6V BEC system and the finned, aluminum-red anodized heatsink.

The Hobbywing QUICRUN WP range of ESCs is suitable for the harshest of environments when racing or bashing due to its exceptional water-proof and dust-proof design. This protection level is up to IP-67 standards, which means it is splash-proof, water-proof, and dust-proof under normal use, it has not been designed to be permanently immersed in water for any period of time. The G2 version offers innovative intelligent freewheeling technology, is highly efficient, operates at a lower temperature for improved reliability, and has an upgraded BEC system suitable for HV servos. This upgraded BEC system is adjustable from 6-7.4V, with a continuous current of 6A, and an amazing maximum burst current of 12A.

The Hobbywing QUICRUN Fusion SE 1200KV 540 sensored brushless motor with integrated 40A brushless ESC greatly reduces the overall size and weight of the conventional separate setup. It has been designed specifically for 1/10 crawlers and offers strong low-speed torque, extremely smooth running at low speeds, and is far superior to the common sensored brushless system that has gone before. This compact combo also includes a powerful, adjustable SBEC system (6~7.4V@6A) which makes it suitable for HV servos.

The Rhino VE40A electronic speed controller with 32-bit MCU has been designed primarily for competitive 1/10, and 1/12 RC rock crawlers, but it is also very suitable for other types of cars and trucks. The preloaded AM32 custom firmware is optimized for RC rock crawlers, but the firmware can be configured for other applications by using the DYS USB-Link (not supplied).

The Turnigy TrackStar TS series of ESCs are the latest generation of competition-level 1/10 scale car speed controllers. They are simple to use, have up to amazing 64° TURBO and BOOST timing settings, offer explosive power, smooth start-up and acceleration, and include a whole host of easy programming options. Using intelligent MCU logic and top-notch components, they set a new standard in quality, yet affordable car electronic speed controllers. The included BEC system is an ultra-stable switch "V" regulator which is switchable from 6~7.4V and can deliver a constant current of 5A, and a peak of 8A.

These ESCs have 34 separate adjustable parameters which can be easily programmed using the optional smart program box (sold separately). These programming options are too many to list here, but a few of the main options are shown below, the rest can be seen in the attached manual under the "Manuals/Files" tab. Other features are multiple protection functions, low voltage, heat protection, etc, built-in super switch mode BEC, offline data recording, cooling fan, and more.

The Turnigy TrackStar TS series of ESCs are the latest generation of competition-level 1/8 scale car speed controllers. They are simple to use, have up to amazing 48° TURBO and BOOST timing settings, offer explosive power, smooth start-up and acceleration, and include a whole host of easy programming options. Using intelligent MCU logic and top-notch components, they set a new standard in quality, yet affordable car electronic speed controllers. The included BEC system has an ultra-stable super-switching mode regulator which is programmable from 6~7.4V and can deliver a constant current of 8A, and a peak of 12A.

These ESCs have 33 separate adjustable parameters which can be easily programmed using the optional smart program box (sold separately). These programming options are too many to list here, but a few of the main options are shown below, the rest can be seen in the attached manual under the "Manuals/Files" tab. Other features are multiple protection functions, low voltage, heat protection, etc, built-in super switch mode BEC, offline data recording, cooling fan, and more.

esc carro 10A padrão com reverso para a frente e uma boa variedade de recursos, como calendário ajustar e de ruptura. Suporta uma ampla gama de motores. Muito confiável!

Características:
recurso de proteção completa, incluindo de baixa tensão, o excesso de calor, sinal de aceleração perdido, startup
proteção e auto-check.
Compatível com motor brushless sensorless.
Excelente desempenho de inicialização, linear e resposta do acelerador rápido.
Suporta mais alto 240,000RPM velocidade do motor (2 pólos), 80,000RPM (6 pólos) e 40.000 (12 pólos).
Fácil de configurar com cartão de programa.
Sistema pode detectar automaticamente o ponto neutro do acelerador, e faixa neutra é ajustável.
Três modos de trabalho para diferentes ambientes.
Ajuste da força inversa de 4 etapas
5 passos iniciar o ajuste de força.
ajuste da força de travagem de 3 etapas
ajuste de arrastar força de travagem de 5 etapas,
4 passo de ajuste inicial da força de travagem.

Especificação:
Tensão de entrada: baterias de lítio 1-2S / 3 ~ 8 Ni-xx
Cont. Atual: 10A
Saída BEC: 1A / 5V (linear)
Tamanho (comprimento x largura alta X): 22x17x7mm
Peso: 8g

HobbyKing® ™ X-Car Besta série ESC s oferta de excelente desempenho e funcionalidades a um preço excelente. Com linearidade do acelerador precisa, suave inicialização / aceleração, freios fortes e opções de programação totalmente ajustáveis, você não vai encontrar um melhor valor em R / C carro ESC s no mercado hoje!

Construído com componentes de alta qualidade, e oferecendo o funcionamento do motor, tanto sensored e senorless, este 1/8 Scale 150A série ESC oferece desempenho verdadeiramente versátil e de alta que não vai quebrar o banco.

Características:
• resposta do acelerador melhorada para uma excelente aceleração
• Utiliza interface avançada PC para configurar ou atualização de firmware
• Utiliza as duas cartões do programa LCD e LED
• Ajustável BEC 6.0V saída / 8.4V
• Vários recursos de proteção, incluindo baixa tensão cortado proteção, proteção contra sobrecarga de aquecimento e aceleração / perda de sinal
• Compatível com Novak, LRP, motores brushless ORION

especificações:
Corrente contínua: 150A
Explosão: 1080A
Resistance: 0.0002ohms
Adequado Tipo Motor: 4 Pole sem sensor e motor brushless sensored
Bateria: 2 ~ 6S Lipoly 5 18S ~ NiMH / NiCd
BEC saída: 6.0V ~ 8.4V ajustável / 3A
Dimensões: 55x48x37mm
Peso: 165 g

especificações:
Constante atual: 40A
Explosão atual: 60A
Bateria: 2-6S Lipoly / 5-18s Nixx
BEC: 5.5v / 4A
Tipo de Motor: Brushless Sensorless
Tamanho: 45 x 30 x 17 milímetros
Peso: 36 g

Funções de programação:
Tipo de Bateria: Lipo / Nixx
Brake: On / Off
Voltage Protection: Low / Mid / High
Modo de proteção: Reduzir / Corte de potência de energia
Timing: Baixo / Médio / Alto
Startup: Rápido / Normal / Soft
PWM Frequência: 8k / 16k
Modo de helicóptero: Off / 5 seg / 15 seg (Start up delay)

especificações:
Constante atual: 50A
Explosão atual: 80A
Bateria: 2-4S Lipoly / 5-12s Nixx
BEC: 5.5v / 4A
Tipo de Motor: Brushless Sensorless
Tamanho: 70 x 32 x 17 milímetros
Peso: 71g

Funções de programação:
Tipo de Bateria: Lipo / Nixx
Brake: On / Off
Voltage Protection: Low / Mid / High
Modo de proteção: Reduzir / Corte de potência de energia
Timing: Baixo / Médio / Alto
Startup: Rápido / Normal / Soft
PWM Frequência: 8k / 16k
Modo de helicóptero: Off / 5 seg / 15 seg (Start up delay)

especificações:
Constante atual: 30A
Explosão atual: 40A
Bateria: 2-4S Lipoly / 5-12s Nixx
BEC: 5V / 2A
Tipo de Motor: Brushless Sensorless
Resfriamento: Watercooled
Tamanho: 70 x 27 x 17 milímetros
Peso: 53 g

Funções de programação:
Modo de execução: Avante com freio / frente e para trás com freio / Frente e verso
Aceleração: 6% / 9% / 12%
Proteção de Baixa Tensão: Nenhum / 2.6V / 2.8V / 3.0V / 3.2V / 3.4V
Comece Mode (Punch): Nível 1 / Nível 2 / Nível 3 / Nível 4 / Nível 5 / Nível 6 / Nível 7 / Nível 8 / Nível 9
Força inversa: 25% / 50% / 75% / 100%
Tempo: 0 ° / 5 ° / 10 ° / 15 ° / 20 ° / 25 ° / 30 ° / automática

especificações:
Constante atual: 90A
Explosão atual: 120A
Bateria: 2-6S Lipoly
BEC: 5.5v / 4A
Tipo de Motor: Brushless Sensorless
Resfriamento: Watercooled
Tamanho: 87 x 38 x 22 milímetros
Peso: 105 g

Funções de programação:
Modo de execução: Avante com freio / frente e para trás com freio / Frente e verso
Aceleração: 6% / 9% / 12%
Proteção de Baixa Tensão: Nenhum / 2.6V / 2.8V / 3.0V / 3.2V / 3.4V
Comece Mode (Punch): Nível 1 / Nível 2 / Nível 3 / Nível 4 / Nível 5 / Nível 6 / Nível 7 / Nível 8 / Nível 9
Força inversa: 25% / 50% / 75% / 100%
Tempo: 0 ° / 5 ° / 10 ° / 15 ° / 20 ° / 25 ° / 30 ° / automática

O HobbyKing Red Brick ESC s não vai ganhar o primeiro lugar para o estilo, embora eles vão tirar pontos principais para a simplicidade e confiabilidade. Com um conjunto básico de programação apresenta estes ESC s são uma solução perfeita para quem procura um controlador básico, mas robusta velocidade.

O Red Brick ESC s foram projetados com a dissipação de calor em mente. com mais de calor de alumínio de tamanho afunda o Red Brick ESC s são um pouco maiores do que muitos ESC s na sua classe, no entanto este compromisso em tamanho é destinado a ajudar a eliminar os problemas associados com mais de aquecimento.

Características:
•, resposta do acelerador linear suave
• Utiliza poderosa, alta performance MCU
• funções de proteção auto múltiplos: entrada de tensão anormal, baixa proteção da bateria, sobre a proteção térmica, perda de sinal do acelerador
• Programável via stick do acelerador (ver instruções em "Files" guia)

especificações:
Constante atual: 70A
Max Explosão atual: 90A
Tensão de entrada: 2 ~ 7S (7,4 ~ 25,9), 6 ~ 20 NiCd / NiMH
BEC: 5V / 5 A
Dimensões: 60x35x18mm
Peso: 70 g
Líder Servo: JR Tipo