Carregadores e acessórios RC

XT30U Silicone Charge Lead with 4mm Banana Plugs.

An excellent, low resistance, flexible silicone charge lead with standard 4mm banana plugs on one end and a set of XT150/AS150 on the other. The Amass XT150/AS150 is a 7mm anti-spark connector rated at up to 150amps, and the 4mm banana plugs suits most chargers on the market today.

Specs:
Battery Connector: XT150/AS150 (7mm)
Charger Connection: 4mm Banana Plug
Wire Diameter: 14AWG
Wire: Tinned copper
Wire Insulation: Silicone rubber
Length: 300mm
Weight: 37.3g

Designed in-house by HobbyKing, this Turnigy parallel charge board can charge up to 6 LiPo or LiHV packs of the same capacity and cell count at the same time. The board is supplied with TRA connectors for the main charging leads, an XT60 lead to plug into the charger, and 2~6S JST-XH connectors for the balancing leads. The board is fused for protection and a 6S JST-XH adaptor lead is also supplied to connect the board to your charger balancing input.

Designed in-house by HobbyKing, this Turnigy parallel charge board can charge up to 6 LiPo or LiHV packs of the same capacity and cell count at the same time. The board is supplied with EC3 connectors for the main charging leads, an XT60 lead to plug into the charger, and 2~6S JST-XH connectors for the balancing leads. The board is fused for protection and a 6S JST-XH adaptor lead is also supplied to connect the board to your charger balancing input.

Designed in-house by HobbyKing, this Turnigy parallel charge board can charge up to 6 LiPo or LiHV packs of the same capacity and cell count at the same time. The board is supplied with EC5 connectors for the main charging leads, an XT60 lead to plug into the charger, and 2~6S JST-XH connectors for the balancing leads. The board is fused for protection and a 6S JST-XH adaptor lead is also supplied to connect the board to your charger balancing input.

Designed in-house by HobbyKing, this Turnigy parallel charge board can charge up to 6 LiPo or LiHV packs of the same capacity and cell count at the same time. The board is supplied with TR connectors for the main charging leads, a pair of 4mm banana plugs to connect to the charger, and 2~6S JST-XH connectors for the balancing leads. The board is fused for protection and a 6S JST-XH adaptor lead is also supplied to connect the board to your charger balancing input.

Designed in-house by HobbyKing, this Turnigy parallel charge board can charge up to 6 LiPo or LiHV packs of the same capacity and cell count at the same time. The board is supplied with EC3 connectors for the main charging leads, a pair of 4mm banana plugs to connect to the charger, and 2~6S JST-XH connectors for the balancing leads. The board is fused for protection and a 6S JST-XH adaptor lead is also supplied to connect the board to your charger balancing input.

O cabo adaptador ToolkitRC SC100 é usado para alimentar carregadores de bateria de baixa voltagem ou outros dispositivos com um conector de entrada XT60 de uma fonte de alimentação USB-C de até 100 W.

Especificações:
Tipo: ToolkitRC SC100 XT60 ~ Cabo de protocolo USB-C
Entrada: USB-C 5.0~20V@PD2.0/PD3.0/QC2.0
Tensão de saída: 5~20V máx.
Corrente de saída: 5A máx.
Conector de Saída: XT60
Comprimento: 50cm
Peso: 35g

Utilize este adaptador para converter uma vantagem de carga XT-60 para carregar JST equipada baterias.

Poder seus itens elétricos compatíveis com a HXT 4mm a DC conversor de jack. O conversor DC Jack tem dois conectores de ficha jack de 2mm (centros positivos) e é ideal para alimentar carregadores ou itens elétricos similares.

especificações:
Comprimento: 210 milímetros
DC Jack: 2 milímetros
Conector da bateria: 4 milímetros HXT

A maioria das baterias 7S padrão de polímero de lítio possuem duas portas de equilíbrio, um equilíbrio chumbo 4S e 3S (7S totais). Isso torna difícil para carregar com a maioria dos carregadores de bateria standard que só dispõem de uma porta equilíbrio.

Com este adaptador super útil você pode facilmente carregar a bateria 7S com um carregador equilíbrio 8 ~ 10S capazes padrão que aceita equilíbrio plugues JST-XH. Este adaptador leva os 4S e 3S fichas individuais de seu bloco, e combina-los para um único plug equilíbrio 7S que é capaz de se conectar à maioria dos 8 ~ 10S carregadores capazes padrão.

especificações:
Entrada: 1 x 4S e 1 x 3S JST-XH equilíbrio plugue
Saída: 7S JST-XH equilíbrio plugue
Comprimento: 100 milímetros

HXT 4mm a ligação T-Connector Adapter Bateria (2pc)

Este adaptador irá converter uma bateria equipado HXT 4mm a um conector em T para uso com um CES equipado conector em T ou de chumbo de carga.

Spec:
Peso: 7g (cada)

This simple and effective charge lead comes pre-soldered with standard 4mm bullet connectors at the charger end and has stepped, bullet connectors at the battery end allowing you to charge hard case packs that utilise 4mm and 5mm connectors. 

This adapter will convert an HXT 5.5mm bullet equipped battery to an XT90 for use with an XT90 equipped ESC or an XT90 Charge lead.

This adapter will convert an XT90 equipped battery to an HXT 5.5mm bullet for use with an HXT 5.5mm bullet equipped ESC or an HXT 5.5mm bullet Charge lead.