Quase pronto para voar Balsa/espuma (ARF)

Introduzindo nosso EPP 3D MX2. Com um design fantástico e layout, isso tudo EPP 3D'er irá satisfazer os pilotos 3D mais ansiosos!

É fuselagem é resistente a torções muito rígida ainda leve com cargas de espaço debaixo da escotilha superior longa para o seu rádio e sistema de energia. A asa é um caso de uma peça com construção EPP, um aerofólio simétrico muito preciso com 2 mastros adicionais para minimizar flex e torcer. As superfícies de controle são outra coisa - o elevador, leme e ailerons apresentam uma construção de 3 camadas (Epp-Depron-PPE) para fazer superfícies rígidas e NÃO à flexão à extrema joga! Snap rolls 'Snap' e resposta de controle é instantânea.

A luz - ainda rígida - fuselagem acrescenta-se a um grande voando 3D 'espumoso'. Cachoeiras, harriers, giros planos, círculos de rolamento este modelo tem a precisão para executar estas e quaisquer outros movimentos que você pode pensar!

Montagem da célula em um processo rápido de 10-15 minutos com a ajuda de um pouco de forma CA. Os layouts de rádio e do sistema de potência são muito simples, a longo escotilha superior fazendo para fácil acesso.

Este é um grande modelo para o parque de vôo em geral e 3D incondicional. Você será duramente pressionado para quebrar este modelo, vai levar duros golpes e manter apenas saltar para trás todas as vezes!


Características:
• material de EPP resistente, leve e resistente acidente
• Superfícies de controle composto EPP / depron Stiff
• Design revolucionário aumenta a integridade estrutural e a rigidez da estrutura do avião
• Leve fornece carga de asa optimal
• Excelente desempenho acrobático e manobrabilidade 3D.
• O design simples permite fácil acesso e instalação dos equipamentos
• A se destacar esquema de cores grande para orientação


especificações:
Envergadura: 955 milímetros
Comprimento: 945 milímetros
Área Wing: 15.2dm2
Peso: 550g (sem bateria)




exige:
sistema de rádio 4 canais
2217 950-1100KV Brushless outrunner
30Amp ESC
3S 11.1V 1100-1300MAH Li-Po
10x4.7 / hélice 11x4.7
4 x servos 9g

Este pequeno kit leva cerca de 4 horas para construir e irá satisfazer o jocky acelerador em todos nós!

O Flycat vem com 56 milímetros EDF e você vai precisar de um 25A ESC & 4800kv inrunner.

Este plano é extremamente rápido, (mais de 100 mph!), No entanto, ainda estável em vôo lento.

Spec.
Envergadura: 640 milímetros
Comprimento: 800 milímetros
Peso: 290 g
BESC: 25A (não incluído)
Motor: 4800kv 20-30 tamanho Inrunner (não incluído)
Lipoly: 1300mAh 11.1v 20C (não incluído)

Requeridos.
Motor & ESC
3 x Servo 9g
5 ou 10 minutos de epóxi (Araldite)
1 x Servo Y chumbo
1 x Servo Extensão chumbo
12AWG Silicon fio (20 centímetros para o motor ESC)
1300mAh 11.1v 20C bateria lipo
O seu próprio receptor e transmissor

O nosso relatório vôo.

Kit se encaixa bem, leve lixamento de bordos anterior e posterior necessárias para remover a espuma extra. Optamos por não reforçar a ala com tubulação CF, que didnt provar ser um problema, mesmo em plena velocidade alta G voltas.

Optamos por montar o BESC sendo área da bateria, caso a bateria precisava ser movido para a frente para ajustar CofG, no entanto, isso não era necessário.

EDF foi montado na vara de montagem. Vara montagem foi encurtado, com o pedaço extra usado para elevar a EDF fora a vara para limpar a mortalha EDF. 2 parafusos realizada a unidade de ventilação para o pau, uma antes e outra depois das pás do ventilador.

Primeiro voo.

Mantivemos CofG 9,5 centímetros a partir do ápice das asas ponta. O Flycat era mão lançou a 3/4 do acelerador, acelerando rapidamente. Para nossa surpresa, foi necessário nenhum corte.

O Flycat é um kit extremamente rápido para voar, e exigiu uma série de elevador em turnos. Sugerimos colocar o elevador no máximo joga. Ele precisa de quantidades enormes de elevador durante as curvas!

Em geral um excelente plano que voa sem problemas, mesmo em dias de vento.

Nós sugerimos um bom pacote de lipo, como este pequeno hotty vai mastigar através de um 1500mAh em apenas 5 minutos. Utilizou-se o pacote de 3S1P ZIPPY-R 1800mAh 22C durante cerca de 8 voos minuto. Em comparação com o pacote ZIPPY-Q, que nos levou curto em cerca de 7 minutos.

Você está pronto para ser o Barão Vermelho do seu parque local? Bem com o fantástico Von Stik você pode ser um ás da aviação em questão de minutos.

Um grande projeto da vara lento, o Von Stik foi feito para ser um super leve, voar em qualquer lugar modelo, com um poderoso motor redutor de correr uma bateria lipoly 1S 3.7V 400mAh.

Fornecido com a sua própria rádio de 2,4 GHz para o vôo livre de interferências, fácil de montar e terminou em um impressionante acabamento Red Baron, com a Von Stik você estará fazendo ataques mergulho e metralhando é executado em nenhum momento a todos.

É fácil de voar com o seu sistema básico de leme e controle de elevador e é muito indulgente para o piloto iniciante. Na verdade, o Von Stik faz para um primeiro modelo perfeito para qualquer jovem ou mesmo para o experiente piloto que está à procura de um avião de fun-fly totalmente que pode ser jogado em um parque local sem qualquer problema.

Características:
• sistema de rádio 2.4Gh
• O peso leve
• Fácil de montar
• modelo de Leme / Elevador
• Perfeito para iniciantes
• negrito acabamento "Red Baron" Beautiful

especificações:
Wingspan: 52 centímetros
Comprimento: 38 centímetros
RC Sistema: 2.4Ghz
Hélice: 6050 (slowfly)
Peso: 75 g
Bateria Requerida: 1S 3.7V 350-400mAh Lipoly
Distância de controle: 150m
Modo: 2

Looking for the perfect trainer? Or an in-expensive FPV platform? Maybe you are a club pilot looking for something you can just pull out of the car and fly on one of those lazy Sunday afternoons? The Hobbyking® ™ Bixler® ™ 2 ticks all of these boxes and more! The Bixler® ™ 2 has had some improvements to make it even better such as a bigger air inlet for better motor cooling.

Improving on the popular Bixler 2, this latest kit is the perfect trainer plane or inexpensive FPV platform. Attach your flight camera into the nose or canopy of the plane to enjoy First Person View while flying. The Bixler 3 kit requires a motor, ESCs, a radio system and battery. 

The H-King Crusader 30E is based on the classic stick design. This electric RC plane can be flown by both beginners and experts. It is constructed from lightweight ply and balsa that is painted with a high contrast color scheme. The Crusader will stand out on the ground and in the air at your local hobby club.

The Ranger 2000 is easy to assemble and features a large wingspan which provides stability, and also allows the model to fly at slow speeds. The EPO wings are fitted with two spars for strength and each aileron is reinforced with carbon to eliminate any chance of distortion or twisting. The wings are attached to the fuselage using fast connect clips, after flying, simply squeeze the clips to release the wings.

The Phoenix V2 2000 is a quick and easy to assemble electric powered glider with flaps and large ailerons for a precise, aerobatic performance. The EPO wings are fitted with a carbon spar for strength and 2 metal spars join the wings to the fuselage. Also, each aileron is reinforced with carbon to eliminate any chance of distortion or twisting. The wings are attached to the fuselage using fast connect clips, after flying, simply squeeze the clips to release the wings.

The Phoenix 2400 is an extended wing version of the popular Phoenix 1600mm and 2000mm range of electric powered gliders. Assembly is quick and easy with no glue required, the vertical fin and horizontal stabilizer are simply screwed to the rear of the fuselage. The EPO wings are fitted with a carbon spar for strength and 2 metal spars join the wings to the fuselage. Also, each aileron is reinforced with carbon to eliminate any chance of distortion or twisting. The wings are attached to the fuselage using fast connect clips, after flying, simply squeeze the clips to release the wings.

O Wargo Signature Edge 540T 3D é mais um avião incrível da série inspirado no renomado piloto 3D Michael Wargo. O Edge 540T foi projetado especificamente para vôos 3D precisos e treinamento acrobático. Michael Wargo, nosso piloto de equipe e especialista em 3D, queria uma aeronave de espuma que fosse mais rígida e mais leve do que outras espumas. Isso foi conseguido pela combinação de uma estrutura de balsa leve e rígida coberta com espuma de EPP leve e resistente a choques.

The Dancing Wings Hobby Fokker Eindecker III is a scale model of the famous World War 1 monoplane fighter. The kit comes almost ready to fly and is constructed in balsa for a strong, lightweight, authentic structure. A lot of scale detail is supplied including, a dummy engine, scale wheels, and a dummy machine gun, plus a full accessory kit is also supplied which includes all the necessary hardware including scale rigging to complete the kit.

The Dancing Wings Hobby S.E.5A is a detailed scale model of the famous World War 1 biplane fighter. The kit comes almost ready to fly and is constructed in balsa for a strong, lightweight, authentic structure. A lot of scale detail is supplied including, scale exhausts, scale wheels, and a dummy machine gun, plus a full accessory kit is also supplied which includes all the necessary hardware including scale rigging to complete the kit.

We have all had to start learning to fly an RC model at some point, and a stable, high-wing trainer that is very forgiving is what is required. The Dancing Wings Hobby Vogee-16 Trainer is the perfect choice for the rookie pilot. It has a large, flat-bottomed wing with dihedral which enables it to fly very slowly, and it has the stability to sort itself out if you get in a muddle. The Vogee's flying characteristics are very benign, beginners tend to over-control, and the Vogee is very gentle in its handling, especially if you install one of the readily available 3-axis gyros that are available on the market these days. It also has a tricycle landing gear with a steerable nosewheel which really helps with the take-offs and landings. This version of the Vogee is supplied with a powerful 2817-900KV brushless motor, a 60A brushless ESC, an 11" prop, 2 x 37g servos, and 2 x 17g 

The Dancing Wings Hobby Stick-14T 3D aerobatic trainer is the perfect choice for intermediate and experienced RC pilots alike. It is based on the classic stick design and is quite capable of all the usual aerobatic maneuvers, plus with the right power train, it doubles up as the perfect 3D trainer. It has a very wide speed range, it is just as happy flying slowly as it is screaming about the sky. For added fun and enjoyment, the strip ailerons are split halfway making for outboard ailerons and inboard flaps. This allows for really slow or steep approach landings, and if the flaps are mixed in with your other controls it allows you to customize the handling to suit your own flying style. 

The Dancing Wings Hobby Aion laser cut balsa kit is an easy-build electric sports glider that includes ailerons and flaps. The Aion is aimed at the modeler who wants to experience real model-making but wants something that is reasonably straightforward to build. This is achieved with the use of accurate laser-cut parts and the simple box-type fuselage which produce a strong, accurate, lightweight structure. The Aion is relatively easy to build, however, we do recommend that some experience in building a wood model airplane has been gained previously. Most of the components are constructed over the detailed, high-quality printed 1:1 building plan. This outstanding kit is supplied with a powerful 2216-920KV brushless motor, a 30A brushless ESC, an 11" folding prop with metal spinner, 6 x 9g servos, and an iron-on covering film pack

The Dancing Wings Hobby Savage Bobber is a small, lightweight foam model that is quick and simple to build. The full-size Savage Bobber was devised by the Zlin Aviation Company. The Bobber as in the motorcycle world means that it is a stripped-down, customized version of an original. The Savage Bobber is a stripped-down, customized version of its older brother the Savage Classic. It is lighter, more maneuverable, and has a slightly narrower fuselage, and the absence of covering to the rear of the fuselage greatly improves the crosswind handling.

The model is reasonably straightforward to assemble, it is manufactured in pre-painted high-quality EPP foam sheet for the majority of the construction, tough plastic for the open framework rear fuselage, and lightweight balsa for the internal structure. Carbon strips are also included to reinforce and improve the stiffness of the structure. It builds up quickly into a good-looking, fun-to-fly lightweight (only 98g) sports plane that is perfect for indoor or park flying. This ARF kit is supplied with a powerful 1108-4000KV brushless motor, 5A brushless ESC, 5" propeller, and 4 x 2g servos.

The Dancing Wings Hobby Shining is a large lightweight profile-style foam kit that is quick and simple to build. It has been designed to be the perfect introduction to 3D flying and will perform extreme 3D maneuvers such as waterfalls, harriers, knife-edge loops, rolling circles, and much more.

The model is very straightforward to assemble, it is manufactured in pre-painted high-quality EPP foam sheet for the majority of the construction so the parts count is quite low, and carbon strips are supplied for strengthening. It builds up quickly into a good-looking, fun-to-fly lightweight extreme sport 3D plane that is perfect for park flying and on playing fields. This ARF model is supplied with a powerful 2216-950KV brushless motor, 30A brushless ESC, 10" propeller, and 4 x 9g servos.

This great-looking EDF sports jet is the one you have all been waiting for, and it has one of the lowest all-up weights in its class, it is a good 500g lighter than comparable models that are available on the market today. It is a sport scale design and is based on the iconic BAE Hawk trainer as used by military air forces all over the world. This easy-to-assemble model has been termed as an almost ready-to-fly-plus, it is completely built out of the box, the wings, all-flying horizontal stabilizers, and vertical stabilizer just bolt-on, and pre-installed are a set of all-metal electronic retracts with doors, sequencer control box, and lightweight wheels, 11 high-torque, metal-geared digital servos, and a set of pre-installed, day-bright LED lights. The Sports Hawk comes pre-painted in a Formula One-inspired paint scheme and includes a set of HobbyKing brand decals that you can apply if you wish. The pre-painted Sport Hawk color scheme lends itself nicely to having other sponsorship decals being applied, or you could even repaint it in a custom color scheme, the choice is yours. A nice touch is the removable base to the cockpit area which makes it very easy to add a pilot and more cockpit detail if you wish.

The Bixler 1.1 is a proven platform for beginners right through to intermediate pilots. Well known for stability, the Bixler is also an excellent choice for an inexpensive FPV platform and perfect for those lazy Sunday afternoons.

This version of the Bixler 1.1 is not supplied with a motor, ESC, servos, or RC equipment, it allows you to choose yourself the components you wish to use. Whatever you are looking for, the Bixler 1.1 has it covered.