Carregadores

The ToolkitRC Q6AC is a 4-channel (Quad) smart charger that will independently charge/discharge 4 batteries at the same time. The Q6AC has a built-in 400W power supply that allows it to be powered from a 100~240V AC mains power source. It also can operate on a 7~30V DC external power source of up to 1000W (input connection XT90) which is perfect for extreme fast charging at the flying field, race track, or boating lake. Another feature of the Q6AC is a built-in wireless charging system, so say goodbye to tangled wires. This system supports devices with the ability to wireless charge such as mobile phones, etc at up to a charge rate of 15W.

The ToolkitRC Q6AC is a 4-channel (Quad) smart charger that will independently charge/discharge 4 batteries at the same time. The Q6AC has a built-in 400W power supply that allows it to be powered from a 100~240V AC mains power source. It also can operate on a 7~30V DC external power source of up to 1000W (input connection XT90) which is perfect for extreme fast charging at the flying field, race track, or boating lake. Another feature of the Q6AC is a built-in wireless charging system, so say goodbye to tangled wires. This system supports devices with the ability to wireless charge such as mobile phones, etc at up to a charge rate of 15W.

The ToolkitRC Q6AC is a 4-channel (Quad) smart charger that will independently charge/discharge 4 batteries at the same time. The Q6AC has a built-in 400W power supply that allows it to be powered from a 100~240V AC mains power source. It also can operate on a 7~30V DC external power source of up to 1000W (input connection XT90) which is perfect for extreme fast charging at the flying field, race track, or boating lake. Another feature of the Q6AC is a built-in wireless charging system, so say goodbye to tangled wires. This system supports devices with the ability to wireless charge such as mobile phones, etc at up to a charge rate of 15W.

The Ultra Power UP7 range of chargers uses the latest state-of-the-art technology, is very simple and intuitive to use, and is loaded with lots of features. Their ability to operate from either AC mains or a DC power source of 9~32V means they are extremely versatile, as they can be used at home or when out on the field to charge your batteries.

The UP7 can charge two batteries of different chemistry, and different voltages at the same time as it is two chargers in one unit. The LCD screen is split into two to show the information for each battery pack whilst being set up or charged/discharged. Both charging outputs can charge from 0.1~10A and can charge either 1~6S lithium-type cells (including LiHV), 1~16S NiMH/NiCd, or 1~12S Pb cells.

The Ultra Power UP7 range of chargers uses the latest state-of-the-art technology, is very simple and intuitive to use, and is loaded with lots of features. Their ability to operate from either AC mains or a DC power source of 9~32V means they are extremely versatile, as they can be used at home or when out on the field to charge your batteries.

The UP7 can charge two batteries of different chemistry, and different voltages at the same time as it is two chargers in one unit. The LCD screen is split into two to show the information for each battery pack whilst being set up or charged/discharged. Both charging outputs can charge from 0.1~10A and can charge either 1~6S lithium-type cells (including LiHV), 1~16S NiMH/NiCd, or 1~12S Pb cells.

The Ultra Power UP7 range of chargers uses the latest state-of-the-art technology, is very simple and intuitive to use, and is loaded with lots of features. Their ability to operate from either AC mains or a DC power source of 9~32V means they are extremely versatile, as they can be used at home or when out on the field to charge your batteries.

The UP7 can charge two batteries of different chemistry, and different voltages at the same time as it is two chargers in one unit. The LCD screen is split into two to show the information for each battery pack whilst being set up or charged/discharged. Both charging outputs can charge from 0.1~10A and can charge either 1~6S lithium-type cells (including LiHV), 1~16S NiMH/NiCd, or 1~12S Pb cells.

The Ultra Power UP7 range of chargers uses the latest state-of-the-art technology, is very simple and intuitive to use, and is loaded with lots of features. Their ability to operate from either AC mains or a DC power source of 9~32V means they are extremely versatile, as they can be used at home or when out on the field to charge your batteries.

The UP7 can charge two batteries of different chemistry, and different voltages at the same time as it is two chargers in one unit. The LCD screen is split into two to show the information for each battery pack whilst being set up or charged/discharged. Both charging outputs can charge from 0.1~10A and can charge either 1~6S lithium-type cells (including LiHV), 1~16S NiMH/NiCd, or 1~12S Pb cells.

The Ultra Power UP9 range of chargers uses the latest state-of-the-art technology, is very simple and intuitive to use, and is loaded with lots of features. Their ability to operate from either AC mains or a DC power source of 11~18V means they are extremely versatile, as they can be used at home or when out on the field to charge your batteries.

The UP9 can charge four batteries of the same type and voltage at the same time making it perfect if you use lots of the same batteries to power your models. The large easy-to-read LCD screen shows the information for the battery pack whilst they are being set up, then shows real-time data when the packs are being charged. The charging outputs can simultaneously charge from 0.1~5A up to a max of 50W per port and can charge either 1~6S lithium-type cells (including LiHV), 1~16S NiMH/NiCd, or 1~12S Pb cells.

The Ultra Power UP9 range of chargers uses the latest state-of-the-art technology, is very simple and intuitive to use, and is loaded with lots of features. Their ability to operate from either AC mains or a DC power source of 11~18V means they are extremely versatile, as they can be used at home or when out on the field to charge your batteries.

The UP9 can charge four batteries of the same type and voltage at the same time making it perfect if you use lots of the same batteries to power your models. The large easy-to-read LCD screen shows the information for the battery packs whilst they are being set up, then shows real-time data when the packs are being charged. The charging outputs can simultaneously charge from 0.1~5A up to a max of 50W per port and can charge either 1~6S lithium-type cells (including LiHV), 1~16S NiMH/NiCd, or 1~12S Pb cells.

The Ultra Power UP9 range of chargers uses the latest state-of-the-art technology, is very simple and intuitive to use, and is loaded with lots of features. Their ability to operate from either AC mains or a DC power source of 11~18V means they are extremely versatile, as they can be used at home or when out on the field to charge your batteries.

The UP9 can charge four batteries of the same type and voltage at the same time making it perfect if you use lots of the same batteries to power your models. The large easy-to-read LCD screen shows the information for the battery packs whilst they are being set up, then shows real-time data when the packs are being charged. The charging outputs can simultaneously charge from 0.1~5A up to a max of 50W per port and can charge either 1~6S lithium-type cells (including LiHV), 1~16S NiMH/NiCd, or 1~12S Pb cells.

The Ultra Power UP9 range of chargers uses the latest state-of-the-art technology, is very simple and intuitive to use, and is loaded with lots of features. Their ability to operate from either AC mains or a DC power source of 11~18V means they are extremely versatile, as they can be used at home or when out on the field to charge your batteries.

The UP9 can charge four batteries of the same type and voltage at the same time making it perfect if you use lots of the same batteries to power your models. The large easy-to-read LCD screen shows the information for the battery packs whilst they are being set up, then shows real-time data when the packs are being charged. The charging outputs can simultaneously charge from 0.1~5A up to a max of 50W per port and can charge either 1~6S lithium-type cells (including LiHV), 1~16S NiMH/NiCd, or 1~12S Pb cells.

The ToolkitRC M8D is a powerful, versatile, touch-screen unit that integrates functions such as charging, discharging, and balance management for a range of battery types. The M8D is also a dual charger, so it can charge 2 batteries at a time, and these can be different voltages and chemistries. The M8D is a DC unit only, so requires an input voltage of 10~49V DC, this makes it perfect for charging at the flying field, race track, or boating lake. For use in the workshop, it can also be connected to a suitable mains power supply.

The ToolkitRC M450 is a simple-to-use, no-nonsense, straightforward balance charger for LiPo, LiFe, and Li-ion batteries. It is an AC mains-powered charger only (100~240V), and can charge 2~4S battery packs at up to 5A, and a maximum of 50W.

Setting the type of battery, and the charge current is a simple affair using a single button (short press, and long press actions), and the intuitive, easy-to-read, wide angle, backlit, IPS 1.54" 240x240 pixel LCD screen. The 32-bit ARM processor provides high-precision charging management and gives a balance charge accuracy of <0.005V. Ports include an XT60 charging port, a 2~4S JST-XH balance port, and the standard AC input port.

The ToolkitRC M450 is a simple-to-use, no-nonsense, straightforward balance charger for LiPo, LiFe, and Li-ion batteries. It is an AC mains-powered charger only (100~240V), and can charge 2~4S battery packs at up to 5A, and a maximum of 50W.

Setting the type of battery, and the charge current is a simple affair using a single button (short press, and long press actions), and the intuitive, easy-to-read, wide angle, backlit, IPS 1.54" 240x240 pixel LCD screen. The 32-bit ARM processor provides high-precision charging management and gives a balance charge accuracy of <0.005V. Ports include an XT60 charging port, a 2~4S JST-XH balance port, and the standard AC input port.

The ToolkitRC M450 is a simple-to-use, no-nonsense, straightforward balance charger for LiPo, LiFe, and Li-ion batteries. It is an AC mains-powered charger only (100~240V), can charge 2~4S battery packs at up to 5A, and a maximum of 50W.

Setting the type of battery, and the charge current is a simple affair using a single button (short press, and long press actions), and the intuitive, easy-to-read, wide angle, backlit, IPS 1.54" 240x240 pixel LCD screen. The 32-bit ARM processor provides high-precision charging management and gives a balance charge accuracy of <0.005V. Ports include an XT60 charging port, a 2~4S JST-XH balance port, and the standard AC input port.

The ToolkitRC M450 is a simple-to-use, no-nonsense, straightforward balance charger for LiPo, LiFe, and Li-ion batteries. It is an AC mains-powered charger only (100~240V), can charge 2~4S battery packs at up to 5A, and a maximum of 50W.

Setting the type of battery, and the charge current is a simple affair using a single button (short press, and long press actions), and the intuitive, easy-to-read, wide angle, backlit, IPS 1.54" 240x240 pixel LCD screen. The 32-bit ARM processor provides high-precision charging management and gives a balance charge accuracy of <0.005V. Ports include an XT60 charging port, a 2~4S JST-XH balance port, and the standard AC input port.

ToolkitRC U3 Compact 2~3S USB Type C 25W 2A balance charger is an ultra-compact palm-size balance charger, that plugs into your favorite USB mains power supply. No fancy programming with this baby, just plug it into your USB adapter, connect your 2~3S LiPo battery balance lead, switch it on, and instantly it will start a balanced charge. The charge rate is set at 2A and the LED light will glow red when charging, then change to green when the charge is complete.

Features:
• A compact, fixed-rate charger for 2~3S LiPo batteries
• Utilizes any popular USB Type-C power adapter
• The perfect companion for charging items while traveling
• Simple LED light system denotes charging and standby

Specification: 

Model NO.: P6

Smart charging: The HOTA T8 charger and checker is equipped with intelligent features to ensure safe and efficient charging of your batteries.

Hota T6 battery charger is a small size charger designed for 1-6s LiHV/Life/Lilon/Lixx/Lipo batteries . It supports DC/PD input, with DC input charging powersoared to 300W, the maximum charging current can reach 15A. It is small, safe and reliable, great for the fpv racing drone batteries.

Specification:
Max Charge Capacity: DC 500W
Charge Current: 0.1A-20.0A
Max Discharge Capacity: 15W
Discharge Current: 0.1A-1.5A
Input Voltage: DC 10-34V
Ouput Voltage: DC 1-35

Este equilíbrio carregador Turnigy é simples de usar, confiável e segura para qualquer modelador. Ele apresenta uma proteção de carga inteligente para garantir as baterias não estão sobrecarregadas e tem monitoramento em tempo real aumentando o ciclo de vida de suas baterias. Pode ser alimentado a partir de qualquer saída de 12V e encargos em 800mA. O carregamento é através do equilíbrio chumbo JST-XH em sua bateria compatível. Ternos Todos os Turnigy, Zippy ea maioria dos outros tipos de baterias. Você pode facilmente conectar vários destes carregadores com a mesma fonte de energia para carregar vários pacotes ao mesmo tempo.

Características:
• proteção de carregamento inteligente
• 2 ~ 3S Compatível
• Encargos através do equilíbrio de chumbo
• Fácil de usar, seguro e confiável
• Inclui cabo de alimentação com clipes de Croc

especificações:
Tensão de entrada: 11 ~ 14V
Tensão de saída: 8,4 ~ 12,6 V DC
Corrente de saída: 800mA (Max)
Dimensões: 74x50x25mm
Peso: 46g

Por que se contentar com apenas ser capaz de carregar seus DJI Fantasma 2 pilhas em casa?

O carregador Quanum DC Charger campo permite que você carregue rápido e fácil o Fantasma 2 pilhas no campo a partir de praticamente qualquer fonte de alimentação 10 ~ 26VDC! Isto significa bateria fácil de carregamento de seu carro ou bateria de arranque do caminhão!

Basta conectar o jacaré a bateria de arranque do seu veículo e do condutor de saída para a bateria Fantasma 2. A vantagem de saída possui um plug protegida de polaridade que impede a conexão imprópria. Este carregador fornece até 4A de corrente, correspondente ao do original carregador de bateria DJI Fantasma 2.

Características:
• Design compacto
• Fácil de usar
• Inversão de polaridade protegida
• 10 ~ tensão de entrada 26VDC
• saída 12.6VDC 4A
• caso dissipador de alumínio oferece excelente refrigeração

especificações:
Entrada: 10 ~ 26VDC (garras jacaré)
Saída: 12.6VDC 4A (DJI Fantasma 2 compatível com plug de carga)
Caso Dimensões: 103x76x35mm

O B3AC Carregador Compacto HobbyKing® ™ é um carregador balanace LiPoly simples e compacto para 2 baterias 3s ~. Possui construído em portos equilíbrio de plug JST-XH e 3 LEDs para indicar o status da carga.

O HobbyKing® ™ B3AC faz um carregador de bolso ideal para se manter em sua caixa de campo.

especificações:
Entrada: 110v ou 240v A / C (50 / 60Hz)
Contagem de Células: 2 ~ 3s
Tipo de Bateria: LiPoly
Corrente de saída: 3 x 800mA
Dimensões: 95x55x32mm

Carregue em casa no 100 / 240v ou no campo de 12v. O B6-AC lida com ambos!
O IMAX B6-AC V2 é um carregador de rocha sólida isso é capaz de cobrar, equilibrar e descarga Leão, lipo, a vida (A123), NiCd e NiMH.
Esta não é uma farsa. É um verdadeiro B6 IMAX. Nossa taxa de falha / retorno sobre este carregador são extremamente baixos.

Características:
• AC 100 ~ 240V ou entrada de 12V DC
• controlado por microprocessador
• sensibilidade Delta-peak
• balanceamento célula individual
• Li-ion, LiPo e vida capazes
• Ni-Cd e NiMH capaz
• função Store, permite que a corrente armazenamento seguro
• função de limite de Tempo
• Armazenamento de dados (Armazene até 5 pacotes na memória)
• monitorização da tensão de entrada. (Protege baterias de carro no campo)
• Bateria break-in e ciclismo

especificações:
Tensão de entrada: 11 ~ 18V
Alimentação do circuito: Max carga: 50W / Max Discharge: 5W
Cobrar Faixa de corrente: 0.1 ~ 6.0A
Descarga actual gama: 0.1 ~ 2.0A
Células Ni-MH / NiCd: 1 ~ 15
Células Poly Li-ion /: 1 ~ 6
Pb tensão da bateria: 2 ~ 20V
Peso: 632g
Dimensões: 135x144x36mm

Este carregador tem uma ficha equilíbrio JST-XH, o que o torna compatível com Zippy, HXT, Turnigy e qualquer pacote com um adaptador JST.

The ISDT BG-8S Smart Battery Checker is a new style of multipurpose battery checker. It is specifically designed for hobbyists of Remote Control products. It comes with lots of great features to help check your batteries, and receiver signals and even has a USB output that allows you to charge your phone or other devices. The Battery Checker has a 2.4” 320x240 display that can easily be seen in sunlight and has an easy-to-use menu system to show all functions and data.

The Turnigy Quad 4x6S can charge four battery packs simultaneously! The packs can be of a variety of types, such as Lilo, LiPo, LiFe, LIHV, NiMH, NiCd, and Pb. A quality-designed charger with accurate balancing and a familiar, intuitive menu system.

The latest version of the popular IMAX B6AC has arrived and now boasts some unique new features. The latest V2 Model now offers PC connectivity which allows the user to control the charger via your home computer and upgrade the firmware as and when necessary.

The Turnigy E3 Compact LiPoly charger is a very simple to use the charger for 2S and 3S battery packs. No need for additional power supplies or 12v batteries as this little unit has its own built-in power supply that is quite happy on mains power from 100v to 240v (this particular unit comes with a UK plug and lead).

TURNIGY continues to lead the way in compact AC/DC battery chargers with the ACCUCELL C150 smart battery charger/balancer. It has the ability to charge Lipo/Lilo/LiFe/LiHV/NiMH/NiCd and lead acid batteries as well as having battery management systems, 20 charge/discharge memories, error protection amd much much more. Programming is extremely straightforward and intuitive with the simple to use touch buttons, easy to read LCD screen and easy to follow menu's.

TURNIGY continues to lead the way in compact AC/DC battery chargers with the ACCUCELL C150 smart battery charger/balancer. It has the ability to charge Lipo/Lilo/LiFe/LiHV/NiMH/NiCd and lead acid batteries as well as having battery management systems, 20 charge/discharge memories, error protection amd much much more. Programming is extremely straightforward and intuitive with the simple to use touch buttons, easy to read LCD screen and easy to follow menu's.

TURNIGY continues to lead the way in compact AC/DC battery chargers with the ACCUCELL C150 smart battery charger/balancer. It has the ability to charge Lipo/Lilo/LiFe/LiHV/NiMH/NiCd and lead acid batteries as well as having battery management systems, 20 charge/discharge memories, error protection amd much much more. Programming is extremely straightforward and intuitive with the simple to use touch buttons, easy to read LCD screen and easy to follow menu's.

Turnigy has moved into the the next decade of the 21st century with the T240 touch screen charger. It has the ability to charge Lipo/Lilo/LiFe/LiHV/NiMH/NiCd and lead acid batteries as well as having battery management, security settings and operation data memory.