Sistemas de Potência

Compatível com Futuba fasst transmissores da Corona R14FA oferece uma alternativa acessível para usuários de rádio Futaba.

especificações:
Corrente de funcionamento:
70mA @ modo FASST 7CH normal e 110 mA max,
80mA @ modo multi-canal FASST normal e 110 mA max
Tensão de funcionamento: 4.0 ~ 10V
Latência:
7ms em alta velocidade PPM (HS), 14ms para o modo de baixa velocidade PPM (LS) @ FASST multi-canal,
8ms em alta velocidade PPM (HS), 16ms para baixo PPM velocidade (LS) @ modo 7CH FASST
Sensibilidade: ~ 96dBm
Fail Safe: Sim
Tamanho: 53x37x16mm
Peso: 22g
Comprimento da antena: 136 milímetros

Compatibilidade:
transmissores 2.4GHz FUTABA FASST
TM7, TM8, TM10, TM14, 6EX-2.4G, 7C-2.4G, 8FG, 10CG, 12FG

Montar este dispositivo prático algum lugar no seu modelo de onde ele pode ser visto claramente e ligá-lo em um canal de reposição no seu receptor, se nenhum canal está disponível, em seguida, usar uma ligação Y. Esta unidade irá dar-lhe uma verificação visual do seu LiPoly ou receptor vida útil da bateria de cada vez que ligar. O fácil de ler série de LEDs irá mostrar-lhe se é seguro continuar ou se a bateria precisa ser carregada.

especificações:
Faixa de tensão: 6,6 ~ 7.4V
Dimensões: 40x21x2.5mm
Peso: 4g
Comprimento do fio: 320 milímetros
Plug: Tipo de JR

O RMILEC Adapter Converter Board é a solução perfeita para permitir uma fácil ligação a um receptor SBUS. O adaptador T4363NB18 suporta a fonte de alimentação de 5V e pode ser usado não só para combinar 12FG ou 14MZ transmissores, mas também podem ser colocados individualmente em outro local como uma estação de retransmissão.

O conselho é fornecido completo com hardware incluindo, conectores da bateria JST, interruptor on / off, terminais, equipamentos e acessórios.

Por favor, note: soldagem de liga / desliga e os terminais é necessária.

especificações:
Material: PCB
Peso: 39.65g
Dimensões: 90 x 115 milímetros

FrSky TFR6 7CH 2.4Ghz receptor FASST Compatível

Compatibilidade:
FASST 2.4G: Air Systems (Modo 7CH / Multi Mode)
FrSky TF Módulos: TF-8M, TF-14M


Características:
O peso leve e tamanho pequeno
Duas opções de configuração à prova de falhas selecionáveis


Especificações:
Número de canais: 7
Operando Faixa de tensão: 3.5V ~ 10V
Faixa de temperatura operacional: -10C ~ 60C
Dimensão: 37 * 22 * 8 milímetros
Peso: 7.8 g

A tensão Protector Turnigy ajuda a prevenir o seu receptor de cair abaixo de sua tensão de operação requerida. Isso ajuda a eliminar "saídas marrons" e impede o seu receptor de reinicialização. Ele também ajudará a reduzir a carga sobre BEC do seu ESC e reduzir a probabilidade de glitching. Basta ligá-lo a qualquer canal de reposição em seu receptor.

Tensão de funcionamento: 3.2V - 11.1V (1s ~ 3s LiPo)
Tensão do capacitor: 16v
Capacidade de armazenamento: 3300uf
Peso: 6,1 g

O FrSky S.BUS para PWM Decoder permite a utilização de qualquer padrão analógico ou servos digitais com o seu receptor compatível S.BUS. Isso elimina a necessidade de usar S.BUS caro servos específicas que permitem que você use seus modelos servos existentes.

Com 4 canais de saída programáveis, você pode atribuir independentemente cada servo para um canal de sua escolha enquanto apenas ter que conectar a vantagem de uma entrada do seu receptor. Isso faz com que sua fiação muito mais arrumado e permite a fácil criação de seus servos, sem a necessidade de executar vários cabos de extensão.

Este é um grande dispositivo para usar em conjunto com os nossos receptores compatíveis Laranja 7CH e 9CH S.BUS!

inclui:
FrSky S.BUS para PWM Decoder

especificações:
Canal Saídas: 4 programáveis
Canal de Saída chumbo comprimentos: 200mm
Comprimento total: 350 milímetros

* Nota: FrSky Servo Canal Changer necessário (vendido separadamente, ver itens relacionados abaixo) para alterar a atribuição de saídas do canal.

Walkera F210 Corrida Quad - DEVO RX713-Receiver

Parte n º: F210-Z-25

In the world of racing drones the requirements are for small and light weight components. The FS-A8S receiver fits these requirements superbly, being only 20x14x5.3mm and 1.2g.

The FS-A8S is built for use in multi-rotor drones and is a 1-way receiver (no telemetry). It uses the extremely stable AFHDS 2A (Automatic Frequency Hopping Digital System) protocol, supports standard PPM output and has i-BUS support for up to 18 channels.

 This is an excellent receiver to add to your Turnigy Evolution, Turnigy i6S and Turnigy i10 radios.

Easy to use, simply follow the links on the FrSKY website, connect the receiver to the STK and plug the STK into your computer via the USB port. The FrSKY STK updates all FrSKY receivers that support S.Port.

Designed with space-saving and light weight in mind to fit into the smallest of drones, Frsky's XM+ Micro Ultra-Light 16 Channel receiver is no lightweight when it comes to performance!

Boasting no less than 16 channels, failsafe and up to 1km range, the XM+ is compatible with FrSky's D16 mode found on Taranis X9D, X9D Plus, X9E, Q X7 and Horus transmitters as well as external modules, so the full programming power of FrSky's operating systems can be at your fingertips.

Designed with space-saving and lightweight in mind to fit into the smallest of drones, Frsky's XM Plus Micro Ultra-Light 16-Channel receiver is not lightweight when it comes to performance!

Boasting no less than 16 channels, failsafe, and up to 1km range, the XM Plus is compatible with FrSky's D16 mode found on Taranis X9D, X9D Plus, X9E, Q X7, and Horus transmitters as well as external modules, so the full programming power of FrSky's operating systems can be at your fingertips.

The Turnigy X6B is a 6-channel two-way receiver designed for multi-rotor aircraft. It uses the 2.4GHz AFHDS 2A (Automatic Frequency Hopping Digital System) protocol and has a dual omnidirectional antenna with superior noise reduction techniques for reliable interference-free operation. It’s compact, easy to install, and boasts a rich easy-to-use interface. The X6B supports 6-channel PWM output, standard PPM output, and i-BUS support for up to 18 channels alongside a reliable voltage sensor interface. This is an excellent addition to your Turnigy TGY-i6s, TGY-i10, and Evolution transmitters as well as a number of other AFHDS 2A transmitters such as FS-i10, FS-i8, FS-i6, FS-i6S, FS-i6X, FS-i4, and FS-i4X. An excellent receiver for multi-rotor drones as it is lightweight cuts down on cabling and comes with built-in battery monitoring.

The Corona R6SF 2.4GHz S-FHSS compatible 6Ch receiver is designed for use with Futaba S-FHSS/FHSS 2.4GHz transmitters, such as T4YF/T6J/T6K/T8J/T10J/T14SG/T18MZ & T18SZ air systems or 3PL/T3PRKA/4PLS/T4PX or T4GRS using S-FHSS/FHSS RF protocol.

When working in "Special mode" the R6SF can output up to 8 channels using S.bus to allow greater flexibility in performance as well as a convenient way to reduce the wire count in tight installations.

The top of the range, 16 Channel X8R receiver from FrSky with 8 normal PWM outputs and no less than 16 channels on the dedicated S.BUS output. Now supplied with the 2015 firmware to compy with EU regulations.

This is an outstanding receiver for all applications and is perfect for use with the FrSky Horus, X9D and X9E Taranis transmitters, with their built-in XJT Module or any of the D8 systems to take advantage of the new digital Smart Port sensors.

The FrSky Taranis Q X7S is the next step on from the original Taranis Q X7 and comes in a stunning blue case. It also keeps all the cool features of the Taranis Q X7 but adds even more stunning features. It still has all the usual Taranis features in this radio such as Receiver Signal Strength Indicator (RSSI) alerts, Real-time Flight Data Logging and receiver matching.

This receiver was specifically designed by OrangeRx with the FPV racer in mind. Although it is small and ultra-lightweight it has true diversity technology which is especially important for the harsh environment of FPV racing. These racing conditions are far from ideal, low altitude, lots of obstacles, motors, and video transmissions in close quarters, situations where you need a robust reception.

Turnigy T6A-V2 2.4GHz system is an entry level transmitter offering the reliability of the 2.4GHz signal technology and a receiver with 6 channels. This AFHDS transmitter requires a PC to modify any of the channel variables including mixing and servo reversing.

Turnigy T6A-V2 2.4GHz system is an entry-level transmitter offering the reliability of the 2.4GHz signal technology and a receiver with 6 channels. This AFHDS transmitter requires a PC to modify any of the channel variables including mixing and servo reversing.

This handy programming box for the OrangeRx R620X to R1220X V3 and RR12RDTS receivers is perfect to have in your toolbox at the flying field in case you want to change the settings without the need for a PC. It has an integrated RF module that allows you to set up the receiver wirelessly or you can use a wired connection. As the RR12RDTS is primarily designed for drones and helicopters this programming box can also be used to adjust the settings of the flight stabilization systems.

The FrSky RX8R has been upgraded to the PRO version but retains all the old features. The new PRO version has increased precision and lower latency. Its deviation of PWM is reduced to 0.5us, and the delay of PWM output is 9ms less than that of the X8R in high-speed mode. It also has improved anti-interference from the ignition system on combustion engines.

The Turnigy GT5 receiver is perfectly matched to work with the outstanding Turnigy GT5 6CH 2.4GHz AFHDS 2A Surface Radio to provide the most reliable link. Stop changing receivers from model to model and get an extra receiver now.

Após o enorme sucesso do Turnigy Evolution, o Evolution PRO foi projetado com o drone em mente e ainda é incrivelmente compacto para facilitar o transporte de mochila.

After the huge success of the Turnigy Evolution, the engineers at Turnigy listened to customer feedback, went back to the drawing board, and came up with the exciting Turnigy Evolution PRO. As with the Evolution, the Evolution PRO is designed with the drone flier in mind and is still amazingly compact for easy backpack transportation.

Designed to be splash-proof, the HK-GT2 receiver is a great choice for boats, cars on muddy terrain and rainy days. Stop changing receivers from model to model and get an extra receiver now.

The Turnigy GT5 Surface Radio comes with the ever-reliable 6 channel 2.4GHz AFHDS 2A (Automatic Frequency Hopping Digital System) to provide the most reliable link between radio and RC Car or RC Boat. Included in this package is the Turnigy GT5 Receiver with built-in Gyro for the best traction on the track. The ergonomic design fits easily in your hand.

FrSky R9M radio control system is the first FrSky long range system which works in the frequency of 900MHz. The R9M module offers 4 switchable RF power outputs to so you can choose the appropriate power for different flight situations. Compared to another FrSky 2.4GHz long range receiver like the L9R, the R9 receiver has a longer operating range up to 10KM and above. Moreover, the R9 is also a redundancy receiver which can connect to another receiver to ensure the security of your aircraft.

The FLYSKY FGr4S receiver uses the new AFHDS 3 protocol (third-generation Automatic Frequency Hopping Digital System). It uses an internal single-antenna for two-way transmission and is compact in size and easy to install. It can output standard PPM and i-BUS signals.

The OrangeRx TX10i is the big cousin to the popular OrangeRx TX6i. It comes with lots of excellent features such as ergonomic styling, Hall effect gimbals, internal antenna and now with 10 channels so you can use more mixes and features than before to give better control over your model (be it a plane/glider, helicopter or multirotor).