Sistemas de Potência

Turnigy TGY-813 is designed for Gliders and Composite EDFs -  low profile performance, better precision movement and low electric impedance. This low profile servo is also a great choice for retract gear as well as thin wing control surfaces.

This handy programming box for the OrangeRx R620X to R1220X V3 and RR12RDTS receivers is perfect to have in your toolbox at the flying field in case you want to change the settings without the need for a PC. It has an integrated RF module that allows you to set up the receiver wirelessly or you can use a wired connection. As the RR12RDTS is primarily designed for drones and helicopters this programming box can also be used to adjust the settings of the flight stabilization systems.

FrSky M7-R hall sensor gimbal is specially designed for FPV racing, 3D and acrobatic fixed wing and 3D Heli pilots who are using the FrSky Taranis Q X7/X7S Transmitter. The 45°throttle travel will allow you to achieve a quick throttle response resulting in precision control.

The FrSky RX8R has been upgraded to the PRO version but retains all the old features. The new PRO version has increased precision and lower latency. Its deviation of PWM is reduced to 0.5us, and the delay of PWM output is 9ms less than that of the X8R in high-speed mode. It also has improved anti-interference from the ignition system on combustion engines.

The Turnigy GT5 receiver is perfectly matched to work with the outstanding Turnigy GT5 6CH 2.4GHz AFHDS 2A Surface Radio to provide the most reliable link. Stop changing receivers from model to model and get an extra receiver now.

Após o enorme sucesso do Turnigy Evolution, o Evolution PRO foi projetado com o drone em mente e ainda é incrivelmente compacto para facilitar o transporte de mochila.

After the huge success of the Turnigy Evolution, the engineers at Turnigy listened to customer feedback, went back to the drawing board, and came up with the exciting Turnigy Evolution PRO. As with the Evolution, the Evolution PRO is designed with the drone flier in mind and is still amazingly compact for easy backpack transportation.

Designed to be splash-proof, the HK-GT2 receiver is a great choice for boats, cars on muddy terrain and rainy days. Stop changing receivers from model to model and get an extra receiver now.

The Power HD DSM44 digital servo is a micro servo with digital control electronics and metal gears. Servo horns and associated hardware are included.

The Turnigy GT5 Surface Radio comes with the ever-reliable 6 channel 2.4GHz AFHDS 2A (Automatic Frequency Hopping Digital System) to provide the most reliable link between radio and RC Car or RC Boat. Included in this package is the Turnigy GT5 Receiver with built-in Gyro for the best traction on the track. The ergonomic design fits easily in your hand.

FrSky R9M radio control system is the first FrSky long range system which works in the frequency of 900MHz. The R9M module offers 4 switchable RF power outputs to so you can choose the appropriate power for different flight situations. Compared to another FrSky 2.4GHz long range receiver like the L9R, the R9 receiver has a longer operating range up to 10KM and above. Moreover, the R9 is also a redundancy receiver which can connect to another receiver to ensure the security of your aircraft.

Turnigy metal gear micro servos represent great performance in a small package. Well suited for helicopters and lightweight 3D planes, Metal gear for strength and coreless motors for excellent holding power.

The Turnigy servos are known for their quality and reliability. Each servo is supplied with mounting screws and a variety of servo arms.

This kit comes complete with the FrSky Taranis X-Lite BRACE. There are also red replacement gimbal stick ends in two sizes, short and long, depending on your needs.

The FLYSKY FGr4S receiver uses the new AFHDS 3 protocol (third-generation Automatic Frequency Hopping Digital System). It uses an internal single-antenna for two-way transmission and is compact in size and easy to install. It can output standard PPM and i-BUS signals.

The OrangeRx TX10i is the big cousin to the popular OrangeRx TX6i. It comes with lots of excellent features such as ergonomic styling, Hall effect gimbals, internal antenna and now with 10 channels so you can use more mixes and features than before to give better control over your model (be it a plane/glider, helicopter or multirotor).

Se você está preocupado em arranhar a tela do Evolution PROs ou danificar uma alavanca de controle durante o transporte, esta capa atende a todos os seus requisitos. Ele simplesmente clica na frente do seu controlador para proteger com segurança a tela e gruda. Ele vem em preto ou branco.

Se você está preocupado em arranhar a tela do Evolution PROs ou danificar uma alavanca de controle durante o transporte, esta capa atende a todos os seus requisitos. Ele simplesmente clica na frente do seu controlador para proteger com segurança a tela e gruda. Ele vem em preto ou branco.

Corona DS-560WP is a fantastic standard servo. Comes with excellent features such as it is waterproof, has ball bearings and metal gears. Precise control and minimal dead-band width, they are an excellent choice. An excellent choice for cars and boats.

Forte, bem frisado e acabado.
fio de alta qualidade e terminais usados.

Bloqueio de chumbo Servo (5pcs / bag)

Tamanho: L30 x W12 × H5mm

CNC Leme 2 Bandeja 4,0 polegadas (# 4-40) Black

Escoramento: 2 rolamento da inserção
Servo: HITEC, FUTABA, JR
Peso: 85g

COR
Escoramento, Braço: Silver Titanium
Bandeja: O retrabalho acabamento anodizado preto resultante é uma imagem de dois tons elegante

Esta é uma máquina CNC Leme 2_Tray que apresenta um "Servo Arm 4.0 com furos de montagem múltipla 4-40 saída de parafuso.

Este tabuleiro apresenta rolamentos de esferas duplos para o movimento ultra-suave e preciso.

Passatempo Rei Digital Servos pode custar mais do que um análogo, mas para um controle preciso e largura beco sem marca mínima, eles são uma excelente escolha.

Características.
suporte de rolamento de esferas
Digital, com MOSFET
engrenagens de metal
Alta Velocidade e Alto Torque

Spec.
Velocidade: .11sec / 60deg @ 4.8V
Stall Torque: 2.2kg.cm @ 4.8V
Standing Torque: 2.2kg.cm/5deg aguentar !!
Peso: 12,5 g
Tamanho: 22.5x11.5x24.6mm

4,6 kg Corona CS238MG Metal Gear Servo / 0.14sec / 22g

Modelo: CS238MG
Tensão de funcionamento: 4.8V / 6.0V
Corrente de funcionamento: 300mA / 400mA
Velocidade de operação: 0.15sec.60º / 0.14sec.60º
Stall Torque: 4kg.cm / 4.6kg.cm
Tamanho: 29X13X30mm
Peso: 22g
Banda morta: ≤5uSec
Viagem de funcionamento: 40º / um pulso lado 400US viajar
Potenciómetro: 3 deslizante / Direct Drive
Rolamento de esferas: MR106
Engrenagem: Metal
Fio conector: 215 milímetros
Faixa de temperatura operacional: -20 ° C + 60c