$5 - $9.99

Replacement elevator/horizontal stabilizer actuating shafts for the 975mm XFLY T-7A Red Hawk (2pc).

A replacement pair of winglets for the green/white XFLY Eagle Twin 40mm EDF Flying Wing Racing Jet.

A replacement pair of horizontal stabilizers for the blue 750mm XFLY Sukhoi Su-27 Flanker.

A replacement pair of vertical stabilizers for the grey 750mm XFLY Sukhoi Su-27 Flanker.

A replacement pair of vertical stabilizers for the blue 750mm XFLY Sukhoi Su-27 Flanker.

A replacement set of nose and main wheels for the 750mm XFLY Sukhoi Su-27 Flanker.

An excellent, low resistance, flexible silicone charge lead with standard 4mm banana plugs on one end and a set of XT150/AS150 on the other. The Amass XT150/AS150 is a 7mm anti-spark connector rated at up to 150amps, and the 4mm banana plugs suits most chargers on the market today.

Specs:
Battery Connector: XT150/AS150 (7mm)
Charger Connection: 4mm Banana Plug
Wire Diameter: 14AWG
Wire: Tinned copper
Wire Insulation: Silicone rubber
Length: 300mm
Weight: 37.3g

Designed in-house by HobbyKing, this Turnigy parallel charge board can charge up to 6 LiPo or LiHV packs of the same capacity and cell count at the same time. The board is supplied with TRA connectors for the main charging leads, an XT60 lead to plug into the charger, and 2~6S JST-XH connectors for the balancing leads. The board is fused for protection and a 6S JST-XH adaptor lead is also supplied to connect the board to your charger balancing input.

Designed in-house by HobbyKing, this Turnigy parallel charge board can charge up to 6 LiPo or LiHV packs of the same capacity and cell count at the same time. The board is supplied with EC5 connectors for the main charging leads, an XT60 lead to plug into the charger, and 2~6S JST-XH connectors for the balancing leads. The board is fused for protection and a 6S JST-XH adaptor lead is also supplied to connect the board to your charger balancing input.

Designed in-house by HobbyKing, this Turnigy parallel charge board can charge up to 6 LiPo or LiHV packs of the same capacity and cell count at the same time. The board is supplied with TR connectors for the main charging leads, a pair of 4mm banana plugs to connect to the charger, and 2~6S JST-XH connectors for the balancing leads. The board is fused for protection and a 6S JST-XH adaptor lead is also supplied to connect the board to your charger balancing input.

Designed in-house by HobbyKing, this Turnigy parallel charge board can charge up to 6 LiPo or LiHV packs of the same capacity and cell count at the same time. The board is supplied with EC3 connectors for the main charging leads, a pair of 4mm banana plugs to connect to the charger, and 2~6S JST-XH connectors for the balancing leads. The board is fused for protection and a 6S JST-XH adaptor lead is also supplied to connect the board to your charger balancing input.

O cabo adaptador ToolkitRC SC100 é usado para alimentar carregadores de bateria de baixa voltagem ou outros dispositivos com um conector de entrada XT60 de uma fonte de alimentação USB-C de até 100 W.

Especificações:
Tipo: ToolkitRC SC100 XT60 ~ Cabo de protocolo USB-C
Entrada: USB-C 5.0~20V@PD2.0/PD3.0/QC2.0
Tensão de saída: 5~20V máx.
Corrente de saída: 5A máx.
Conector de Saída: XT60
Comprimento: 50cm
Peso: 35g

Frente One Way Versão 2 Turnigy TD10 4WD Touring Car (1 jogo)

Completa Metal Alloy Direcção Knuckle Braços L / R - A2038 e A3015 (1pair)

Um Way Ball Bearing - Trooper Nitro

motores Turnigy XK são sem dúvida um dos melhores motores no mercado hoje. Tudo começa na nossa própria fábrica onde vamos instalar rolamentos de precisão, ímãs corretamente avaliado, rotores equilibradas, eixos de aço ferramenta e estatores que são enrolados à mão. Testamos rigorosamente cada um dos componentes em 14 pontos críticos durante a construção, testando tudo, desde materiais de todo o caminho através de testes de desempenho finais.

Porque nós projetar e construir estes motores totalmente in-house que controlam a produção e garantir a consistência do produto, desde a concepção até à expedição. Nós removemos o meio-homem para trazer-lhe preços de fábrica, enquanto não sacrificar a qualidade ou o desempenho.

Característica:
• Mão-ferida para o máximo de preenchimento de cobre.
• rotor balanceamento de precisão irá impulsionar o desempenho eficiência e potência do motor.
• niquelado rotor sinterizado neodímio para a aceleração máxima do motor, potência de frenagem e desempenho em condições de alta temperatura.

Spec .:
Tamanho: XK1222-11000KV
Poles: 2
KV: 11000
Max atual: 8.5a
Max Tensão: 4.2V / 1S Lipo
Caso Duração: 22 milímetros
Caso Dia: 12mm
Shaft Dia: 1,5 milímetros
Comprimento total: 29 milímetros
Peso: 10 g

Choque sistema de progressiva para BT-4 dá um efeito de amortecimento progressivo através do curso do amortecedor de modo que o efeito é mais suave no início e mais difícil no final. Inclui pistões de choque em branco para que você possa perfurar seus próprios furos para o ajuste preciso para suas necessidades individuais.

especificações:
Duração: 14 milímetros
Diâmetro: 11 milímetros
Pistão: 10mm x 2 milímetros

Turnigy TGY-AN13 servo carro analógico adequado para 1: 8 e 1:10 carros escala com um resistente, geartrain metal.

Fornecido com um pacote completo de hardware.

especificações:
Torque: 13,2 kg / cm (4.8V) ~ 14,5 kg / cm (6.0V)
Velocidade: 0.15sec / 60deg (4.8V) ~ 0.13sec / 60deg (6.0V)
Tensão: 4,8 ~ 6.0V
Tipo: Analog
Engrenagem Train: Metal
Plug: Tipo de JR
Tamanho: 40 x 37,5 x 20 mm
Peso: 58 g

Se você está procurando o servo de direção final para seu truggy escala 1 / 8th, temos apenas a coisa!

O TrackStar TS-621MG é um servo digital tamanho padrão que caracteriza uma geartrain de metal, motor sem núcleo e um tempo de trânsito rápido 0.14sec. Acrescente a isso a excelente performance e fora enganado aparência, e você tem um excelente servo de direção para o preço!

especificações:
Peso: 57 g
Tamanho: 39.0mmx19.5mmx38.5mm
Torque: 16.8kg.cm (4.8V) ~ 21.2kg.cm (6.0V)
Velocidade: 0.16sec / 60deg (4.8V) ~ 0.14sec / 60deg (6.0V)
Tensão: 4,8 ~ 6.0V
Tipo: Standard Digital
Motor: Coreless Motor
Trem de engrenagens: Engrenagens de liga
Rolamento de esferas: rolamento duplo Japão NSK bola
Comprimento do fio: 255 milímetros
Ligue: JR / Futaba

Cartão de programação HobbyKing Boat ESC

Funções de programação:
Modo de execução: Avante com freio / frente e para trás com freio / Frente e verso
Aceleração: 6% / 9% / 12%
Proteção de Baixa Tensão: Nenhum / 2.6V / 2.8V / 3.0V / 3.2V / 3.4V
Comece Mode (Punch): Nível 1 / Nível 2 / Nível 3 / Nível 4 / Nível 5 / Nível 6 / Nível 7 / Nível 8 / Nível 9
Força inversa: 25% / 50% / 75% / 100%
Tempo: 0 ° / 5 ° / 10 ° / 15 ° / 20 ° / 25 ° / 30 ° / automática

This simple and effective charge lead comes pre-soldered with standard 4mm bullet connectors at the charger end and has stepped, bullet connectors at the battery end allowing you to charge hard case packs that utilise 4mm and 5mm connectors. 

Front Sway Bar Set (silver/blue/black) - Basher SaberTooth 1/8 Scale Truggy / Nitro  Circus MT 

Program your Turnigy Marine ESCs with this high-quality program card. Easy to use, this handy program card covers all your basic features and more. Select your Running Mode to ensure your ESCs operate forwards or backwards. The program card also allows you to choose your motor direction, low voltage protection threshold, timing set and start mode.

The Micro Engineering's rail weathering solution is used to weather nickel silver or brass track and track joiners etc so that they match their weathered Flex-Trak.

The Micro Engineering N scale turnout parts includes a cast metal frog with a rib along the bottom, 2 x rail guards and a switch assembly made up of 2 switch rails with molded plastic throwbar.

The Micro Engineering N scale turnout parts includes a cast metal frog with a rib along the bottom, 2 x rail guards and a switch assembly made up of 2 switch rails with molded plastic throwbar.

The Turnigy TrackStar range of 1/10th Brushed Motors is ideal for those that require a no-nonsense motor that will power your vehicle in any conditions. These motors are an ideal solution for backyard bashers or anyone wanting to cross rivers or travel in a wet environment.

The Turnigy TrackStar range of 1/10th Brushed Motors is ideal for those that require a no-nonsense motor that will power your vehicle in any conditions. These motors are an ideal solution for backyard bashers or anyone wanting to cross rivers or travel in a wet environment.

The Turnigy TrackStar range of 1/10th Brushed Motors is ideal for those that require a no-nonsense motor that will power your vehicle in any conditions. These motors are an ideal solution for backyard bashers or anyone wanting to cross rivers or travel in a wet environment.

The Turnigy TrackStar range of 1/10th Brushed Motors is ideal for those that require a no-nonsense motor that will power your vehicle in any conditions. These motors are an ideal solution for backyard bashers or anyone wanting to cross rivers or travel in a wet environment.

Keep the adventure going with high-quality spare parts for your TR-4. The replacement front C hubs are made of aluminum and are an excellent spare part to have handy.

HydroPro Inception Brushless RTR Deep Vee Racing Boat Replacement Drive Shaft Support Set.

HydroPro Inception Brushless RTR Deep Vee Racing Boat Replacement CNC Aluminum Rudder Assembly w/Plastic Mounting Bracket.