Carregador Acessórios

Suitable extension leads for Turnigy lipo batteries.

Suitable extension leads for Turnigy lipo batteries.

Suitable extension leads for Turnigy lipo batteries.

Suitable extension leads for Turnigy lipo batteries.

One end has an XT60 male connector and the other end has a Micro Losi male connector.

4mm Solder Type Banana/Charge Plug (2 pairs).

XT60 Male to 2 x DC Jack Plug Connectors 220mm (2pcs)

Specs:
Connector 1: XT60 Male
Connector 2: 2 x DC Jack Plug
Length: 220mm
Weight: 16.7g each
Quantity: 2pcs

These are good quality balance lead extensions with a 5S JST-XH male connector on one end and a female on the other.

The IMAX B6 V2 follows the lineage of the original B6 but has been improved by increasing the maximum charge power from 50W to 60W, and the maximum charge current from 5A to 6A. Another addition to the V2 is an "AGM Charge" for charging AGM Pb batteries and a "Cold Charge" for charging Pb batteries in cold weather. AGM Pb batteries can be charged up to 5 times faster than conventional Pb batteries, this mode enables this different higher charging rate process. When charging Pb batteries in cold weather special consideration is also required, a cold Pb battery requires a higher charge voltage than when it is warmer, the V2 will also sort this for you when the "Cold Charge" mode is selected. Another additional feature is the "DJI Battery Program", which allows you to charge DJI Mavic TB4X batteries using your B6 charger.

XT30U Silicone Charge Lead with 4mm Banana Plugs.

XT60 Male w/12AWG 100mm Silicone Wire (5pcs).

The SKYRC BD250 is a powerful discharging unit that allows the user to discharge a battery pack at up to 35 amps or 250 watts, it also measures and compares their performance. The BD250 has the ability to discharge, test, and analyze virtually any type and size of battery, regardless of chemistry and the number of cells up to a voltage of 35V.

An excellent, low resistance, flexible silicone charge lead with standard 4mm banana plugs on one end and a set of XT150/AS150 on the other. The Amass XT150/AS150 is a 7mm anti-spark connector rated at up to 150amps, and the 4mm banana plugs suits most chargers on the market today.

Specs:
Battery Connector: XT150/AS150 (7mm)
Charger Connection: 4mm Banana Plug
Wire Diameter: 14AWG
Wire: Tinned copper
Wire Insulation: Silicone rubber
Length: 300mm
Weight: 37.3g

Designed in-house by HobbyKing, this Turnigy parallel charge board can charge up to 6 LiPo or LiHV packs of the same capacity and cell count at the same time. The board is supplied with TRA connectors for the main charging leads, an XT60 lead to plug into the charger, and 2~6S JST-XH connectors for the balancing leads. The board is fused for protection and a 6S JST-XH adaptor lead is also supplied to connect the board to your charger balancing input.

Designed in-house by HobbyKing, this Turnigy parallel charge board can charge up to 6 LiPo or LiHV packs of the same capacity and cell count at the same time. The board is supplied with EC3 connectors for the main charging leads, an XT60 lead to plug into the charger, and 2~6S JST-XH connectors for the balancing leads. The board is fused for protection and a 6S JST-XH adaptor lead is also supplied to connect the board to your charger balancing input.

Designed in-house by HobbyKing, this Turnigy parallel charge board can charge up to 6 LiPo or LiHV packs of the same capacity and cell count at the same time. The board is supplied with EC5 connectors for the main charging leads, an XT60 lead to plug into the charger, and 2~6S JST-XH connectors for the balancing leads. The board is fused for protection and a 6S JST-XH adaptor lead is also supplied to connect the board to your charger balancing input.

Designed in-house by HobbyKing, this Turnigy parallel charge board can charge up to 6 LiPo or LiHV packs of the same capacity and cell count at the same time. The board is supplied with TR connectors for the main charging leads, a pair of 4mm banana plugs to connect to the charger, and 2~6S JST-XH connectors for the balancing leads. The board is fused for protection and a 6S JST-XH adaptor lead is also supplied to connect the board to your charger balancing input.

Designed in-house by HobbyKing, this Turnigy parallel charge board can charge up to 6 LiPo or LiHV packs of the same capacity and cell count at the same time. The board is supplied with EC3 connectors for the main charging leads, a pair of 4mm banana plugs to connect to the charger, and 2~6S JST-XH connectors for the balancing leads. The board is fused for protection and a 6S JST-XH adaptor lead is also supplied to connect the board to your charger balancing input.

This compact adapter is perfect to convert an HXT3.5mm equipped battery to an XT60, or an XT60 charge lead to HXT3.5mm.

Specs:
Connector 1: HXT3.5mm
Connector 2: XT60 female
Weight: 15g (each)
Quantity: 2pcs

A compact battery adapter to convert a T-Connector battery lead to a TR output, compatible with similar types of connectors.

A compact battery adapter to convert an EC5 battery lead to a TR output, compatible with similar types of connectors.

A compact battery adapter to convert an EC3 battery lead to a TR output, compatible with similar types of connectors.

A compact battery adapter to convert an XT60 battery lead to a TR output, compatible with similar types of connectors.

A compact battery adapter to convert an XT90 battery lead to a TR output, compatible with similar types of connectors.

O ToolkitRC M7AC é uma ferramenta versátil e multifuncional que integra funções como carregamento, descarregamento, ciclismo, teste de sinal/fonte de sinal (PWM/PPM/SBUS), multímetro, carregamento inteligente de bateria de drone de consumo, alertas de voz personalizáveis ​​em vários idiomas, e muito mais. O M7AC é leve e compacto e possui uma fonte de alimentação integrada para que possa operar a partir de uma fonte de alimentação de 100 ~ 240V CA. Ele também tem a capacidade de operar com uma fonte de alimentação de 7 ~ 28V DC, perfeita para carregar no campo de vôo, pista de corrida ou lago para passeios de barco.

O ToolkitRC M4 Pocket é um carregador ultracompacto do tamanho da palma da mão, apesar de seu tamanho pequeno, pode carregar uma bateria 1 ~ 4S em até 80W. É simples e intuitivo de usar, possui uma tela LCD colorida IPS de 1,54" x 240 x 240 pixels de fácil leitura e um único botão de programação.

O ToolkitRC MC8 Advanced Multifunction Battery Checker está repleto de recursos e possui uma grande tela colorida para o status completo da bateria rapidamente. Este verificador multifuncional pode verificar o status de baterias de 1 a 8 células, tem balanceamento de bateria com um toque e pode ler sinais de saída para PWM, PPM ou SBUS, como um verificador de receptor. A saída PWM também pode ser usada como um testador de servo, e o MC8 pode até carregar rapidamente seus dispositivos móveis por meio de sua porta de saída USB-C 20W.

O ToolkitRC M6DAC é um carregador de bateria duplo versátil que integra funções como carregamento, carregamento síncrono, descarregamento, ciclismo, carregamento inteligente de bateria de drone de consumo e possui uma interface de usuário multilíngue. O M6DAC possui uma fonte de alimentação integrada de 200W que permite que ele seja alimentado por uma fonte de alimentação de 100 ~ 240V CA. Ele também tem a capacidade de operar com uma fonte de alimentação de 7 ~ 28V CC, perfeita para carregar no campo de vôo, pista de corrida ou lago para passeios de barco.

O ToolkitRC M4AC é um carregador de equilíbrio simples de usar, prático e direto para baterias LiPo, LiFe e Li-ion. É apenas um carregador alimentado pela rede elétrica (100~240V) e pode carregar baterias 1~4S de até 2,5A e um máximo de 30W.

O cabo adaptador ToolkitRC SC100 é usado para alimentar carregadores de bateria de baixa voltagem ou outros dispositivos com um conector de entrada XT60 de uma fonte de alimentação USB-C de até 100 W.

Especificações:
Tipo: ToolkitRC SC100 XT60 ~ Cabo de protocolo USB-C
Entrada: USB-C 5.0~20V@PD2.0/PD3.0/QC2.0
Tensão de saída: 5~20V máx.
Corrente de saída: 5A máx.
Conector de Saída: XT60
Comprimento: 50cm
Peso: 35g

Turnigy has moved into the next decade of the 21st century with the T240 touchscreen charger. It can charge Lipo/Lilo/LiFe/LiHV/NiMH/NiCd and lead acid batteries. It also has battery management, security settings, and operation data memory, and can charge two different battery chemistries simultaneously. Programming is very straightforward by using the 3.2-inch color LCD touchscreen display.

Tired of being stuck with the basic USB charger for your TRX4M batteries? Well, we've got just the solution! This handy little charge lead converts your TRX4M battery plug to a JST and 2S balance plug for use with standard, hobby-grade battery chargers. Now you can not only charge with ease but also properly store your batteries by utilizing your charger's storage mode.