Área de Liquidação

A replacement battery hatch and cockpit with pilot for the 1000mm XFLY A-10 Thunderbolt II Twin.

A replacement fuselage with wiring harness for the XFLY F-22 Raptor Twin 40mm EDF Jet 702mm.

Please note: The nose cone is not supplied with the fuselage.

A replacement pair of main wings for the XFLY F-22 Raptor Twin 40mm EDF Jet 702mm.

A replacement pair of horizontal stabilizers with fixings for the XFLY F-22 Raptor Twin 40mm EDF Jet 702mm.

A replacement pair of vertical stabilizers for the XFLY F-22 Raptor Twin 40mm EDF Jet 702mm.

A replacement cockpit and battery hatch for the XFLY F-22 Raptor Twin 40mm EDF Jet 702mm.

A replacement set of landing gear with wheels for the XFLY F-22 Raptor Twin 40mm EDF Jet 702mm.

The Rocket Surpass range of brushless motors is precision-made using the latest manufacturing processes. The heatsink can is CNC machined from a solid billet of 6061 T6 aluminum, high-purity copper is used for the windings for improved efficiency, and oversized bearings are used for durability. The stator has super thin (0.2mm) laminations, and the rotor is then precision balanced for reliability, and ultra-smooth running at maximum RPMs.

The Rocket Surpass range of brushless motors is precision-made using the latest manufacturing processes. The heatsink can is CNC machined from a solid billet of 6061 T6 aluminum, high-purity copper is used for the windings for improved efficiency, and oversized bearings are used for durability. The stator has super thin (0.2mm) laminations, and the rotor is then precision balanced for reliability, and ultra-smooth running at maximum RPMs.

The Rocket Surpass 4076-2025KV motor has been specially built for 1/8th scale monster trucks and truggies. This 4-pole, 12-slot high-torque motor is water and dust-proof and features a universal mounting system to fit just about all 1/8th-scale vehicles.

The Rocket Surpass range of brushless motors is precision-made using the latest manufacturing processes. The heatsink can is CNC machined from a solid billet of 6061 T6 aluminum, high-purity copper is used for the windings for improved efficiency, and double-shielded oversized bearings are used for durability. The motor includes sintered neodymium magnets, the stator has super thin (0.2mm) laminations, and the rotor is precision balanced for reliability, and ultra-smooth running at maximum RPMs.

The Rocket Surpass 5065-236KV motor suits sport, scale, and 3D-type models. This robust motor suits LiPo batteries up to 10S, on test with a 10S battery it produced an incredible 2000 watts of power at 57A, making it a great motor for the larger models. The motor is supplied with a machined prop adapter, complete with mounting bolts, allowing it to be mounted either way round.

The Rocket Surpass range of brushless motors is precision-made using the latest manufacturing processes. The heatsink can is CNC machined from a solid billet of 6061 T6 aluminum, high-purity copper is used for the windings for improved efficiency, and oversized ABEC5 high-speed bearings are used for durability. The stator has super thin (0.35mm) laminations, and the rotor is then precision balanced for reliability and ultra-smooth running at maximum RPMs.

The Rocket Surpass KK2845-5900KV motor has been specially built for 1/12~14th size RC cars and trucks and is totally waterproof for use in extreme conditions. This powerful 4-pole, 12-slot motor features a universal mounting system so that it will fit just about all 1/12~14th scale vehicles.

The Rocket Surpass range of brushless motors is precision-made using the latest manufacturing processes. The heatsink can is CNC machined from a solid billet of 6061 T6 aluminum, high-purity copper is used for the windings for improved efficiency, and oversized ABEC5 high-speed bearings are used for durability. The stator has super thin (0.35mm) laminations, and the rotor is then precision balanced for reliability and ultra-smooth running at maximum RPMs.

The Rocket Surpass 3650-5400KV motor has been specially built for 1/10th size RC cars and trucks and is water and dust-resistant for use in demanding conditions. This powerful 4-pole, 12-slot motor features a universal mounting system so that it will fit just about all 1/10th scale vehicles.

The Rocket Surpass range of brushless motors is precision-made using the latest manufacturing processes. The heatsink can is CNC machined from a solid billet of 6061 T6 aluminum, high-purity copper is used for the windings for improved efficiency, and oversized ABEC5 high-speed bearings are used for durability. The stator has super thin (0.35mm) laminations, and the rotor is then precision balanced for reliability and ultra-smooth running at maximum RPMs.

The Rocket Surpass 3660-4500KV motor has been specially built for 1/10th size RC cars and trucks and is water and dust-resistant for use in demanding conditions. This powerful 3T, 4-pole, 12-slot motor features a universal mounting system so that it will fit just about all 1/10th scale vehicles.

An ACE RC Ripper 3720-1100KV brushless motor with prop shaft to upgrade your  H-King MX2 Extreme 30E.

Dytac 20 polegadas SPR Outer Assembleia Barrel para Marui M4 (Silver)

Características:
• 20 polegadas SPR Outer Barrel Set
• Construção em alumínio barril
• Vem com bloco de baixo perfil gás e tubo de gás
• Projetado para Tokyo Marui M4 / M16 AEG
• Cor prata

Spec:
Material: Alumínio
Cor: Prata
Peso: 466g
Comprimento total: 505 milímetros
Tópicos barril: não há discussão sobre este barril
Tipo Barril: Comprimento Rifle
Modelo baseado: Tokyo Marui M4 / M16 AEG
Fabricante: Dytac

O pacote inclui:
1x 20 polegadas SPR Outer Barrel
1x bloco de gás de baixo perfil
Tubo 1x manequim Gas

SkyZone ter forjado uma reputação de qualidade e confiabilidade em seus produtos terem sido analisados ​​e desenvolvido pelos pilotos FPV. O Transmissor SKY-N2000 embala um 2000MW enorme de poder 5.8GHz ultra-limpo! Um must para quem procura maior alcance e trancado em vídeo. O N2000 pode transmitir uma ampla gama de 32 canais e é fornecido completo com todos os cabos de conexão.

O N2000 possui algumas características impressionantes, incluindo a mudança de canal remoto, o que significa que a banda de transmissão e canal pode ser alterado remotamente com um interruptor de 3 posições em seu rádio. Esta função permite-lhe mudar rapidamente para uma faixa clara e frequência que você deve encontrar alguma interferência no seu canal existente.

Características:
• 128 x 64 display digital de cor super brilhante com brilho e contraste controle
• Apresentação do canal e freqüência
• 2W de potência de transmissão
• entrada de vídeo 2Cr, mudança de canal remoto
• bateria de Apoio 2-6S LiPoly
• Indicação da tensão da bateria
• Tela: / Temperatura de detecção atual / PA Poder

especificações:
Tensão de funcionamento: 6.5 ~ 28V
Potência de saída: 27dBm, 30dBm, 33dBm
Conector de antena: SMA Male
Corrente de suprimento @ 12V: 0.5A, 0.6A, 1A
Temperatura de operação: -10 ~ +80 Graus
Precisão de detecção de tensão: ± 0.05V, ± 0,1 V, ± 0.5V
Precisão de detecção de corrente: ± 0.05A, ± 0.06AV, ± 0.2V
Vídeo Largura de Banda: 5MHz, 6MHz, 6MHz
Vídeo Impedância de entrada: 75Ω / 1Vp-p
Áudio impedância de entrada: 6.5M Hz
Áudio Sub-portadora: 4.7KΩ
Dimensões: 60x35x20mm
Peso: 47 g

Olhando para o acabamento profissional em seu próximo projeto Quadrotor? não procure mais! Este simples e fácil de instalar luz conjunto de módulos, irá não só fornecer-lhe com um olhar proffesional, mas também irá permitir que o seu Quadrotor para ser visto em qualquer condição com o seu LED super brilhante de

O conjunto de luz do flash LED oferece uma ampla gama de entrada de tensão de 2-6s e é adequado para Quadrotor até 500mm de diâmetro.

Características:
• Adequado para Quadrotor até 500mm de diâmetro
• tensão de entrada larga, capacidade de 2-6s
• circuito de conversão de frequência de alta eficiência
• Baixo consumo de energia
• Sem piscar de atraso ou redução de brilho
• Alta potência de saída
• ajuste de freqüência simples

especificações:
Comprimento LED Cabo: 500mm
Sistema Peso: 48g
7.4V Tensão de entrada ~ 22.2V

SWAT 41 polegadas Tactical Rifle Gun Bag (Kryptek Nomand)

Características:
• Construção 1000D nylon Cordura
• Duas maneiras método transportando (Handheld / ombro)
• borda protetora laço acolchoado
• Dever Zipper pesado
• Capaz de transportar rifle único, com comprimento até 41 "polegadas
• compartimento principal (1.020 milímetros X 285mmX 70 milímetros)
• Revista malotes (dentro do saco) transportar até cinco M4 / M16 / AK 5.56 /7.62 revistas Tipo
• bolsa frontal de baixo perfil zipper para ferramentas e peças de reposição

especificações:
Peso: 1050g
Material: 1000D Nylon
Cor / Padrão: Kryptek Nomand (KN)
Dimensão: 1.020 milímetros X 285 milímetros X 70 milímetros
Fabricante: SWAT

A replacement multi-connector system for the XFLY Alpha Jet (2pcs).

A replacement fuselage for the 750mm XFLY T-7A Red Hawk.

A replacement pair of vertical stabilizers for the 750mm XFLY T-7A Red Hawk (2pcs).

A replacement set of main and nose wheel landing gear with wheels for the 750mm XFLY T-7A Red Hawk.

A replacement pair of horizontal stabilizers with rotating shafts for the 975mm XFLY T-7A Red Hawk (2pcs).

A replacement set of missiles and drop tank for the 975mm XFLY T-7A Red Hawk (7pcs).

A replacement set of wheels for the 975mm XFLY T-7A Red Hawk (3pcs).

Replacement multi-function control board for the 975mm XFLY T-7A Red Hawk.

A replacement nose gear servoless retract unit for the 975mm XFLY T-7A Red Hawk.

A replacement horizontal stabilizer with elevator for the XFLY Swift 2100mm Sport Glider.

This optional EDF nacelle unit will convert your XFLY Swift 2100 into an EDF-powered sport glider. The unit includes the XFLY Galaxy 64mm 12-blade fan, and the powerful XFLY 2840-3200KV brushless motor to give your Swift on a 4S battery an incredible performance. Installation is very straightforward, once installed you will only need to remove the prop and fit the supplied nose cone.

Specs:
Type: XFLY Swift 2100 Sport Glider Optional EDF Unit
Fan: 64mm 12-blade
Motor: 2840-3200KV brushless
Thrust: 1250g
Recommended Battery: 14.8V (4S) 2200~3300mAh LiPo (not supplied)

A replacement wing set with ailerons for the red and white XFLY 850mm Partenavia P68 Twin.

A replacement fuselage for the grey 750mm XFLY Sukhoi Su-27 Flanker.

A replacement pair of wings for the grey 750mm XFLY Sukhoi Su-27 Flanker.

A replacement pair of wings for the blue 750mm XFLY Sukhoi Su-27 Flanker.

A replacement pair of horizontal stabilizers for the grey 750mm XFLY Sukhoi Su-27 Flanker.

A replacement pair of horizontal stabilizers for the blue 750mm XFLY Sukhoi Su-27 Flanker.