$5 - $9.99

Designed in-house by HobbyKing, this Turnigy parallel charge board can charge up to 6 LiPo or LiHV packs of the same capacity and cell count at the same time. The board is supplied with TRA connectors for the main charging leads, an XT60 lead to plug into the charger, and 2~6S JST-XH connectors for the balancing leads. The board is fused for protection and a 6S JST-XH adaptor lead is also supplied to connect the board to your charger balancing input.

Designed in-house by HobbyKing, this Turnigy parallel charge board can charge up to 6 LiPo or LiHV packs of the same capacity and cell count at the same time. The board is supplied with EC5 connectors for the main charging leads, an XT60 lead to plug into the charger, and 2~6S JST-XH connectors for the balancing leads. The board is fused for protection and a 6S JST-XH adaptor lead is also supplied to connect the board to your charger balancing input.

Designed in-house by HobbyKing, this Turnigy parallel charge board can charge up to 6 LiPo or LiHV packs of the same capacity and cell count at the same time. The board is supplied with TR connectors for the main charging leads, a pair of 4mm banana plugs to connect to the charger, and 2~6S JST-XH connectors for the balancing leads. The board is fused for protection and a 6S JST-XH adaptor lead is also supplied to connect the board to your charger balancing input.

Designed in-house by HobbyKing, this Turnigy parallel charge board can charge up to 6 LiPo or LiHV packs of the same capacity and cell count at the same time. The board is supplied with EC3 connectors for the main charging leads, a pair of 4mm banana plugs to connect to the charger, and 2~6S JST-XH connectors for the balancing leads. The board is fused for protection and a 6S JST-XH adaptor lead is also supplied to connect the board to your charger balancing input.

This next-generation bidirectional cross weave glass fiber reinforcing tape has a transparent "PET" substrate which provides a high longitudinal tensile strength, and is transverse tear resistance, in short, it is extremely strong. The other outstanding property it has is the adhesive, it is super sticky, but allows for positioning. Once you are satisfied with the position of the tape gently apply more pressure and the strength of the bond increases. This strong, pressure-sensitive rubber-based adhesive will also increase its strength over the next 24hrs as it "cures" to form a permanent, very strong bond. Another characteristic of this tape is that it will retain its strength in high and low temperatures.

A replacement wing joiner/main spar for the H-King Yak-11 Red Reno Racer/Commemorative Russian WW2 Warbird.

This is a replacement decal set for the H-King Yak-11 Red Reno Racer.

A replacement prop driver set for the Turnigy TP10 10cc gas engine. This set includes the prop driver with inset magnet, prop washer, and woodruff key.

A replacement 6.5x5 4 blade standard pitch propeller with backplate and screw for both versions of the Avios C-130 V2, is also suitable for the version 1 of the C-130.

A replacement 6.5x5 4 blade reverse pitch propeller with backplate and screw for both versions of the Avios C-130 V2, is also suitable for the version 1 of the C-130.

Accurately drill your propellers for your TP 35cc gas engine with this easy-to-use drilling jig. The jig is CNC machined from aluminum stock and is supplied with a clamping screw to hold the propeller secure whilst drilling.

A replacement set of main and nosewheel landing gear struts for the AVIOS KingTwin. 

A replacement canopy and battery hatch for the H-King F-16 Fighting Falcon 550mm.

A replacement pair of horizontal stabilizers with elevators for the H-King F-16 Fighting Falcon 550mm.

A replacement vertical stabilizer with factory-applied decals for the H-King F-16 Fighting Falcon 550mm.

A replacement canopy and battery hatch for the H-King F-18 Super Hornet 588mm.

A replacement pair of vertical stabilizers with factory-applied decals for the H-King F-18 Super Hornet 588mm.

An upgraded nosewheel landing gear retract set for the Avios KingTwin Sport/Scale Turboprop. This upgraded assembly has been manufactured with a different composition for the plastic parts which is harder. Also, the pushrod linkage has been made of thicker, stronger steel for more durability.

The Aerostar RVS G2 next-generation range of HV Opto brushless speed controllers moves these amazing ESCs up a notch from the ground-breaking original Aerostar RVS HV ESCs. New generation MOSFETs with the aid of the highly efficient cooling fan and finned, aluminum heatsink, ensure that the ESC stays within operating temperatures at all times, and can also safely handle the peak current draw specified. They process much faster due to the high-performance 32bit M4 microprocessor running at 170MHz, and have improved functionality and programmable features. Our RVS (reverse function system) is now instantaneous, with no need for the motor to stop turning, this makes it perfect for EDF braking (reverse thrust), and waterplanes for taxiing, etc. If you don't require the reverse function, simply do not connect the second lead to your receiver, it will then operate as a standard ESC.

O cabo adaptador ToolkitRC SC100 é usado para alimentar carregadores de bateria de baixa voltagem ou outros dispositivos com um conector de entrada XT60 de uma fonte de alimentação USB-C de até 100 W.

Especificações:
Tipo: ToolkitRC SC100 XT60 ~ Cabo de protocolo USB-C
Entrada: USB-C 5.0~20V@PD2.0/PD3.0/QC2.0
Tensão de saída: 5~20V máx.
Corrente de saída: 5A máx.
Conector de Saída: XT60
Comprimento: 50cm
Peso: 35g

A replacement pair of wing interplane struts for the Durafly Carbon Arcus F3A aerobatic biplane.

especificações:
Modelo: TGY-225 mg
Tensão: 4,5 - 6v
Velocidade: .12s
Correndo atual: 180mA
Torque: 3,5 kg / cm
Engrenagens: Metal
Peso: 26 g
Largura de banda morta estreita.

Turnigy TGY-AN13 servo carro analógico adequado para 1: 8 e 1:10 carros escala com um resistente, geartrain metal.

Fornecido com um pacote completo de hardware.

especificações:
Torque: 13,2 kg / cm (4.8V) ~ 14,5 kg / cm (6.0V)
Velocidade: 0.15sec / 60deg (4.8V) ~ 0.13sec / 60deg (6.0V)
Tensão: 4,8 ~ 6.0V
Tipo: Analog
Engrenagem Train: Metal
Plug: Tipo de JR
Tamanho: 40 x 37,5 x 20 mm
Peso: 58 g

Peça de reposição - Premium BNC cabo de 1,3 m RG223 para o sistema UHF Scherrer Rx700LR Long Range

monitorar com segurança a voltagem da bateria com o Turnigy TGY-CVT01 sensor de tensão.

Como uma grande alternativa para definir um temporizador, voar ou conduzir o seu modelo baseado na tensão real da bateria. Dessa forma, se a sua tensão cai mais rápido do que o habitual devido à corrida mais difícil, você pode evitar o excesso de descarregar sua mochila. Ou, talvez você está tendo um bom dia relaxado? Desfrute vezes mais tempo correr e não se cortar curto.

Este, sensor pequeno e compacto também é uma maneira perfeita para adicionar a parte de mente ao executar um modelo de alta performance, permitindo que você verifique se a voltagem da bateria não está caindo excessivamente sob carga.

Para uso com o i10 e i6 transmissores TGY- e TGY-IA10 e receptores i6 V2.

Projetado para ligar em cadeia em conjunto com outros sensores da série TGY-C.

Características:
• Alta qualidade, sensor compacto
• Conectores de entrada e saída estilo Futaba
• Excelente para tensão de supervisão da bateria, não há necessidade de definir mais temporizadores
• Funciona com TGY- i10 e i6 transmissores e TGY-IA10 e receptores i6 V2

especificações:
Faixa de tensão: 0 ~ 100V DC
Precisão: +/- 0.1V
Tensão de entrada: 4.0 ~ 6.5V
Trabalho atual: 9mA
Comprimento do cabo: 195 milímetros
Tamanho: 31 x 15 x 8,5 milímetros
Peso: 6,25 g (leads inc e sensor)

Se você está procurando o servo de direção final para seu truggy escala 1 / 8th, temos apenas a coisa!

O TrackStar TS-621MG é um servo digital tamanho padrão que caracteriza uma geartrain de metal, motor sem núcleo e um tempo de trânsito rápido 0.14sec. Acrescente a isso a excelente performance e fora enganado aparência, e você tem um excelente servo de direção para o preço!

especificações:
Peso: 57 g
Tamanho: 39.0mmx19.5mmx38.5mm
Torque: 16.8kg.cm (4.8V) ~ 21.2kg.cm (6.0V)
Velocidade: 0.16sec / 60deg (4.8V) ~ 0.14sec / 60deg (6.0V)
Tensão: 4,8 ~ 6.0V
Tipo: Standard Digital
Motor: Coreless Motor
Trem de engrenagens: Engrenagens de liga
Rolamento de esferas: rolamento duplo Japão NSK bola
Comprimento do fio: 255 milímetros
Ligue: JR / Futaba

Easy to use, simply follow the links on the FrSKY website, connect the receiver to the STK and plug the STK into your computer via the USB port. The FrSKY STK updates all FrSKY receivers that support S.Port.

The Turnigy X6B is a 6-channel two-way receiver designed for multi-rotor aircraft. It uses the 2.4GHz AFHDS 2A (Automatic Frequency Hopping Digital System) protocol and has a dual omnidirectional antenna with superior noise reduction techniques for reliable interference-free operation. It’s compact, easy to install, and boasts a rich easy-to-use interface. The X6B supports 6-channel PWM output, standard PPM output, and i-BUS support for up to 18 channels alongside a reliable voltage sensor interface. This is an excellent addition to your Turnigy TGY-i6s, TGY-i10, and Evolution transmitters as well as a number of other AFHDS 2A transmitters such as FS-i10, FS-i8, FS-i6, FS-i6S, FS-i6X, FS-i4, and FS-i4X. An excellent receiver for multi-rotor drones as it is lightweight cuts down on cabling and comes with built-in battery monitoring.

Designed to be splash-proof, the HK-GT2 receiver is a great choice for boats, cars on muddy terrain and rainy days. Stop changing receivers from model to model and get an extra receiver now.

Keep the adventure going with high-quality spare parts for your TR-4. The replacement front C hubs are made of aluminum and are an excellent spare part to have handy.

This Mini Vibrating Cleaning set is perfect for removing grease, dust, and other contaminants from small objects. Ideal for bearings, gears, springs, shafts, jewelry, watch parts, and even small precision instruments.