Área de Liquidação

Designed in-house by HobbyKing, this Turnigy parallel charge board can charge up to 6 LiPo or LiHV packs of the same capacity and cell count at the same time. The board is supplied with EC3 connectors for the main charging leads, a pair of 4mm banana plugs to connect to the charger, and 2~6S JST-XH connectors for the balancing leads. The board is fused for protection and a 6S JST-XH adaptor lead is also supplied to connect the board to your charger balancing input.

This next-generation bidirectional cross weave glass fiber reinforcing tape has a transparent "PET" substrate which provides a high longitudinal tensile strength, and is transverse tear resistance, in short, it is extremely strong. The other outstanding property it has is the adhesive, it is super sticky, but allows for positioning. Once you are satisfied with the position of the tape gently apply more pressure and the strength of the bond increases. This strong, pressure-sensitive rubber-based adhesive will also increase its strength over the next 24hrs as it "cures" to form a permanent, very strong bond. Another characteristic of this tape is that it will retain its strength in high and low temperatures.

A replacement wing joiner/main spar for the H-King Yak-11 Red Reno Racer/Commemorative Russian WW2 Warbird.

This is a replacement decal set for the H-King Yak-11 Red Reno Racer.

A replacement prop driver set for the Turnigy TP10 10cc gas engine. This set includes the prop driver with inset magnet, prop washer, and woodruff key.

A replacement 6.5x5 4 blade standard pitch propeller with backplate and screw for both versions of the Avios C-130 V2, is also suitable for the version 1 of the C-130.

A replacement 6.5x5 4 blade reverse pitch propeller with backplate and screw for both versions of the Avios C-130 V2, is also suitable for the version 1 of the C-130.

Accurately drill your propellers for your TP 35cc gas engine with this easy-to-use drilling jig. The jig is CNC machined from aluminum stock and is supplied with a clamping screw to hold the propeller secure whilst drilling.

A replacement set of main and nosewheel landing gear struts for the AVIOS KingTwin. 

A replacement canopy and battery hatch for the H-King F-16 Fighting Falcon 550mm.

A replacement pair of horizontal stabilizers with elevators for the H-King F-16 Fighting Falcon 550mm.

A replacement vertical stabilizer with factory-applied decals for the H-King F-16 Fighting Falcon 550mm.

A replacement canopy and battery hatch for the H-King F-18 Super Hornet 588mm.

A replacement pair of vertical stabilizers with factory-applied decals for the H-King F-18 Super Hornet 588mm.

An upgraded nosewheel landing gear retract set for the Avios KingTwin Sport/Scale Turboprop. This upgraded assembly has been manufactured with a different composition for the plastic parts which is harder. Also, the pushrod linkage has been made of thicker, stronger steel for more durability.

The Aerostar RVS G2 next-generation range of HV Opto brushless speed controllers moves these amazing ESCs up a notch from the ground-breaking original Aerostar RVS HV ESCs. New generation MOSFETs with the aid of the highly efficient cooling fan and finned, aluminum heatsink, ensure that the ESC stays within operating temperatures at all times, and can also safely handle the peak current draw specified. They process much faster due to the high-performance 32bit M4 microprocessor running at 170MHz, and have improved functionality and programmable features. Our RVS (reverse function system) is now instantaneous, with no need for the motor to stop turning, this makes it perfect for EDF braking (reverse thrust), and waterplanes for taxiing, etc. If you don't require the reverse function, simply do not connect the second lead to your receiver, it will then operate as a standard ESC.

O cabo adaptador ToolkitRC SC100 é usado para alimentar carregadores de bateria de baixa voltagem ou outros dispositivos com um conector de entrada XT60 de uma fonte de alimentação USB-C de até 100 W.

Especificações:
Tipo: ToolkitRC SC100 XT60 ~ Cabo de protocolo USB-C
Entrada: USB-C 5.0~20V@PD2.0/PD3.0/QC2.0
Tensão de saída: 5~20V máx.
Corrente de saída: 5A máx.
Conector de Saída: XT60
Comprimento: 50cm
Peso: 35g

A replacement pair of wing interplane struts for the Durafly Carbon Arcus F3A aerobatic biplane.

A replacement gun pod for the blue "Patrouille de France" XFLY Alpha Jet.

A replacement set of wheels for the XFLY Alpha Jet (3pcs).

A replacement horizontal stabilizer rotating actuating shaft for the XFLY Alpha Jet.

A replacement set of wheels for the 750mm XFLY T-7A Red Hawk (3pcs).

A replacement set of wheels for the 975mm XFLY T-7A Red Hawk (3pcs).

Replacement elevator/horizontal stabilizer actuating shafts for the 975mm XFLY T-7A Red Hawk (2pc).

A replacement pair of winglets for the green/white XFLY Eagle Twin 40mm EDF Flying Wing Racing Jet.

A replacement pair of horizontal stabilizers for the blue 750mm XFLY Sukhoi Su-27 Flanker.

A replacement pair of vertical stabilizers for the grey 750mm XFLY Sukhoi Su-27 Flanker.

A replacement pair of vertical stabilizers for the blue 750mm XFLY Sukhoi Su-27 Flanker.

A replacement set of nose and main wheels for the 750mm XFLY Sukhoi Su-27 Flanker.

These are a pair of replacement landing gear with doors and wheels for the H-King P-51D Moonbeam McSwine 750mm (30").

(Suits Versions 1 & 2)

A replacement set of decals for the AXN Floater-Jet.

Plano traseiro e elevador de substituição para o Durafly Goblin Racer em amarelo / preto / prata.

Replacement fuselage for the Durafly Goblin Racer in Pink/Blue/Black.