Ligue e Voe

Esta terceira versão do Durafly DH 100 Vampire segue o exemplo dos seus antecessores para oferecer uma versão fantástica e ainda melhor deste popular jato EDF. Adicionámos muitos mais melhoramentos para que o melhor se torne ainda melhor. Estes novos melhoramentos incluem: reforço adicional em fibra de carbono, suportes do trem de aterragem simplificados e mais leves, condutas e tubos de impulsão melhorados para aumentar o desempenho, nariz de plástico para maior proteção e carenagens de plástico para montagem do retractor.

While Avios are known the world over for their fantastic semi-scale models of powered airplanes, particularly waterplanes, their experience and dedication to designing and producing great flying models means they are perfectly placed to produce other types as well. The Avios Kobuz is a large, aerobatic, sport-scale model with outstanding flight characteristics of the SZD-21 Kobuz single-seat aerobatic glider, designed and built in Poland.

This flapped, 2200mm wingspan model features clean and aesthetic lines, it will fly fast or slow, has an incredible climb rate, and is very aerobatic with good speed retention in the glide. All these things are wrapped up in one big, beautiful package, which is then finished in a stunning hi-viz Swiss color scheme. The color scheme design is quite different top and bottom for great orientation when flying high or at a distance. One feature of the Kobuz is the very large canopy with instrument panel detail, which offers easy access to the battery and RC compartment. There is also plenty of room in the canopy if you wish to convert the Kobuz to FPV.

The Yak-11 was designed as an advanced trainer for use by the Soviet Air Force and came into service in 1947. The pilot and instructor sat in tandem under a long canopy that had separate sliding hoods. Although designed as a trainer, Yak-11s were also used in combat during the Korean War, and more recently, highly modified ones have been used very successfully for air racing. The Steadfast was built from scratch as an out-and-out high-performance single-seat racer in Romania in the early 2000s. It was based on the Yak-3, but essentially it looks the same as a Yak-11, so our model is based on our previous Yak-11 model.

The H-King Yak Steadfast is supplied with a power train that has been developed for pure speed. Using a 6S LiPo pack, the 5020-550KV brushless motor with the supplied 85A ESC and 16x6 prop will give it an incredible turn of speed of over 100 mph. It is very quick, and seeing a model of this impressive size doing fast pylon turns near the ground is a sight to behold. Aerobatics are also a dream to perform, the rolls are very axial, and looping maneuvers are big due to the abundance of power. The only limitations to the aerobatics it will perform are your flying skills.

No seguimento do incrível sucesso do primeiro H-King Paramotor, surge este V2. Esta versão tem uma nova asa parafoil, muito mais eficiente e estável, num esquema de cores vibrantes. Isto torna-o muito mais fácil de lançar e voar e acrescenta muito mais estabilidade ao voar do que a versão anterior. Até consegue descolar do solo com a ajuda de um ajudante, e os toques e descolagens longos e demorados são efectuados com facilidade. Outra melhoria são os cabos que ligam a gôndola ao parapente, que são mais fortes e muito mais suaves, pelo que é menos provável que se prendam uns aos outros aquando do lançamento. A seguir na lista de novas características estão os braços de servo transparentes para maior realismo, uma barra de luz LED super brilhante e um suporte branco. Esta barra de luz ilumina a parte inferior da vela e reflecte-se na hélice branca, permitindo-lhe divertir-se ainda mais com o seu paramotor, permitindo-lhe continuar a voar na zona crepuscular.

The Avios Extra NG (Next Generation) from Hobbyking is a premium semi-scale Aerobatic RC Plane modeled after the latest Extra series aircraft. The full size offers improved aerodynamics, an even higher degree of manoeuvrability, and precise handling. The Avios version of this incredible airplane inherits all these features to make it a great-looking, highly aerobatic, 3D-capable machine.

This high-performance aerobatic airplane features a potent 6S power system and includes a SK3 5055-500KV motor, Aerostar 80A RVS G2 ESC, and a 16x6 propeller. This setup gives you an incredible high power-to-weight ratio. High-torque, high-voltage, metal-geared 30g Turnigy 30/7-DHV digital servos are used throughout. These have excellent resolution and centering so that your exact transmitter inputs are conveyed directly to the control surfaces for precise control in all types of extreme manoeuvres. Also included are a pair of bolt-on "Side Force Generators" for increased side area, which makes for enhanced and stable knife-edge flying - a hallmark of the Extra NG design.

"Aprenda a voar na Tundra Way" com o Prime Tundra PT1200. Esta é mais uma adição à extremamente popular série Tundra de aviões STOL (Short Take-Off and Landing) da Durafly, mas este é voltado principalmente, mas não exclusivamente, para o novato. O PT1200 é o treinador STOL perfeito para aqueles que querem entrar nesse estilo de voar, pois herda as excelentes características de voo STOL da linhagem Tundra, também é muito divertido para os fãs experientes da Tundra!

Do you feel the need for speed? Then this great-looking, extremely fast Rare Bear Reno Racer from Durafly is for you. It is supplied as a Plug-N-Fly model with minimal parts count, so assembly is quick and simple. There is no gluing required, just one screw holds the tail components in place, and 1 screw for the wing. Battery and radio access is via the large magnetically held canopy hatch, so radio installation and battery changes are very easy and straightforward.

Do you feel the need for speed? Then this great-looking, extremely fast Rare Bear Reno Racer from Durafly is for you. It is supplied as a Plug-N-Fly model with minimal parts count, so assembly is quick and simple. There is no gluing required, just one screw holds the tail components in place, and 1 screw for the wing. Battery and radio access is via the large magnetically held canopy hatch, so radio installation and battery changes are very easy and straightforward.

The Hobbyking H-King Mini L-39 has been developed from an earlier version that had a 50mm fan unit. This latest rendition from RC L39 aircraft sports an uprated 64mm 8-blade EDF fan unit with a 2220-3300KV brushless outrunner motor, a 50A ESC, and uses a 4S LiPo battery instead of the original 3S setup. The full-size L-39 jet was designed in the Czech Republic as a high-performance jet trainer for performing basic to advanced pilot training. It was the first trainer aircraft in the world to be equipped with a turbofan.

After the success of the original H-King FLYCAT 70mm EDF jet, which was a basic aileron, elevator, and throttle-only model, we now have the FLYCAT V2. This new version has an upgraded power setup with a brushless inrunner motor and Aerostar RVS G2 ESC, twin rudders, a set of pre-installed electronic retracts, and a brand-new high-viz color scheme. It retains from the V1 its stunning streamlined looks, agility, performance, and impeccable flying characteristics.

With a new more powerful setup, the 2860-2100KV brushless inrunner motor and the 12-blade EDF unit make the Flycat V2 not only quite a bit faster, but it improves the verticals and it also sounds amazing, just like a real turbine, especially when doing fast, high-speed passes. Coupled with the motor and EDF unit is one of our Aerostar 80A RVS G2 speed controllers, this not only gives you solid reliability, it also offers you the choice of instant reverse. If you are flying from a hard runway this helps shorten the landing run quite considerably when selected after touchdown. Another feature of the FLYCAT V2 is the twin-rudders, these bring in another dimension when flying the V2. It is now able to perform even more jet-like maneuvers including falling leaves and knife-edge, etc, and they also help in the approach to landing and when flying at slower speeds. The new high-viz color scheme not only looks great, but it stands out well in the sky which helps orientation when flying big, fast aerobatic maneuvers. Last but not least on the V2 there is no need for hand-launching, it comes with a set of pre-installed grass-capable electronic retracts. These robust and reliable retracts enable smooth take-offs and landings on hard and grass runways

O B-17 Flying Fortress continua a ser um dos mais famosos bombardeiros aliados de WW2. Embora servido em todos os teatros da guerra, foi no teatro de operações europeu (ETO) com o renomado 8ª Força Aérea em particular, que este bombardeiro pesado resistente e bem armados voaram seu caminho para os livros de história.

Com base no sucesso do nosso modelo original Hobbyking "Memphis Belle" temos redesenhado esta enorme 1.875 milímetros warbird envergadura e agora trazer para você o melhor vôo e mais bonita versão deste icónico bombardeiro pesado disponível em qualquer lugar deste tamanho.

Nosso modelo fantástico é simples e rápido para montar a direita fora da caixa com todo o servo de e ESC do pré-instalado. Ele é feito de espuma EPO, por isso é tão difícil como seria de esperar e, como a asa de uma peça é removível, é também muito prático para o transporte.

As rodas escala elétrica pré-embutidos retrair a frente como a aeronave real e são grandes o suficiente para lidar com praticamente qualquer superfície. Há também uma abundância de poder na torneira dos quatro motores brushless 900KV atualizados. adereços de rotação de contador fazer conjugado nulo, lisas decolar de, a ordem do dia e com retalhos de divisão pré-montados, os desembarques são também livre de estresse.

Mas é a atenção aos detalhes sobre esta versão, que é impressionante. linhas de painel foram reduzidos e dois novos esquemas de cores de escala precisa já estão disponíveis. Olive monótono / cinza e prata em geral. Estes dois regimes representam a grande maioria dos B17 do que entraram em acção e como um recurso adicional Também incluímos uma escolha de dois conjuntos 8ª decalque da Força Aérea para cada esquema de cores, bem como uma torre de queixo opcional de modo que você pode criar tanto uma precoce "F" ou posterior variante de "L".

Como Fortaleza Voadora nosso modelo também se irrita com armas, com altos e bola torres, bem como a cauda, ​​nariz e posições arma da cintura. motores manequim Pratt & Whitney são terminou com adereços escala de três contra-lâmina rotativa, centros e, finalmente, trabalhando navegação e luzes de aterragem adicionar ao nível de realismo geral deste modelo impressionante.

Abaixo da superfície nossa B17 foi reforçada com órtese asa adicional e é claro que ela tem sido testado em vôo extensivamente e é no ar que este modelo realmente entrar em seu próprio país.

Você vai ficar impressionado com o quão fácil é voar, quase como um planador motorizado, por vezes, e mesmo que é mais do que capaz de realizar acrobacias de fora da escala, incluindo loops e rolls, é a velocidades mais baixas que parece cada bit do bombardeiro pesado .

Com sua envergadura impressionante, baixos passes traduzir em uma presença real no ar e o som desses quatro suportes conduzi-lo para a frente apenas contribuem para a experiência.

Nossa B17 é o modelo o sonho de um piloto de escala. É um grande avião que parece ótimo, voa lindamente e definitivamente tem o factor "uau" que vai ter cabeças girando onde e quando você voar.

Características:
• esboço Scale
• esquema de cores Authentic
• Escolha de decalques
• turret queixo opcional para a variante "G"
• retrai Servoless
• Flaps
• Luzes de navegação operacional e aterragem
• Motores 900KV poderosas
• adereços contra-rotação

especificações:
Envergadura: 1875 milímetros
Comprimento: 1350 milímetros
Voar Peso: 2750g
Motores: 4 x 900KV Brushless Outrunner Motor
ESC: 4 x 20A ESC
Servos: 6 x 9g Servo
Retrai: Elétrico Servoless retrai

Necessário: (não incluído)
6 Canal Tx e Rx
2 x Baterias 3S 11.1V 2200mAh ~ 3000mAh LiPoly

O modelo é fabricado em espuma EPO forte, com os altos padrões usuais que você espera desta linha de aviões RC. Tal como acontece com a maioria dos outros modelos Durafly, vem "Plug N Fly". Isso significa que é fornecido com uma estrutura fácil de montar, poderoso motor brushless 3719-770KV pré-instalado, Aerostar 40A ESC e 4 servos digitais de 9g pré-instalados. Uma folha de decalque de vinil está incluída, ela precisará ser aplicada durante o processo de construção, isso lhe dá a opção de usar o acabamento prateado como base para criar seu próprio esquema de cores. Uma vez que o modelo é montado, tudo que você precisa é a sua escolha de 4 canais ou mais receptor e uma bateria LiPo de 2200mAh 4S (14,8V).

The H-King A-1 Skyraider PNF is a realistic flying model of the original plane. It is made of strong EPO foam and is electric-powered which makes it ideal as a park flier. There is a built-in Gyro (or Flight Stabilizer) to make flying this plane even easier.

This H-King version of the classic P-51D warbird is manufactured in a superbly finished EPO foam in an authentic blue and silver color scheme with all the decals pre-applied. This is the updated V2 version of this popular model and it now comes with a built-in 6 axis ORX flight stabilization system to make it even easier to fly. The stabilization system utilizes a 32bit MCU and a 6 axis digital gyro for ultra-fast control response, it can also be switched from beginner mode to expert mode.

This H-King version of the classic F4U Corsair warbird is manufactured in a superbly finished EPO foam in an authentic navy color scheme with the decals pre-applied. The Corsair is a very stable flyer in its own right, for most pilots, the gyro is not necessary. However, for beginners and low hours pilots, a 6 axis ORX flight stabilization system is supplied which makes it even easier to fly. The stabilization system utilizes a 32bit MCU and a 6-axis digital gyro for ultra-fast control response, it can be switched from beginner to expert mode as your experience grows.

The H-King P51 "Galloping Ghost" is the first in a new mini-series from H-King, the "Reno Aces", WW2 fighters dressed to impress at the air races. The P-51 "Galloping Ghost" with the included stock 3108-1070KV brushless motor offers a really quick model straight out of the box with speeds approaching 100mph when using the recommended 2200mah 4S lipo. However, if you are an experienced hand and are looking for 100+ mph speeds then there is the optional drop-in fit 3108-1170KV 'Pro' brushless motor. This will give your great-looking Reno Ace a really ballistic performance on the same prop, ESC, and 4S battery for those that can handle the extra rotational torque on launch.

O incrível Avios C-130 está de volta com dois novos esquemas de cores de alta visibilidade, vibrantes e mais leves, além de uma série de outras melhorias. As melhorias no V2 visam principalmente reduzir o peso para melhorar as características de manuseio em vôo lento. Como a versão original, o C-130 V2 é completado com o mais alto nível de detalhes de escala, tem uma envergadura de 1600mm e mede mais de um metro de comprimento.

Esta versão H-King deste impressionante F-16 Fighting Falcon é fabricada em espuma EPO e tem um belo acabamento em um esquema de cores autêntico da USAF com os decalques pré-aplicados na fábrica. O H-King F-16 possui excelentes características de voo por si só, voa como se estivesse sobre trilhos, mas o giroscópio ORX de 6 eixos pré-instalado leva isso a outro nível. Pilotos de todos os níveis de experiência se beneficiarão do uso da configuração intermediária do giroscópio, isso realmente melhora a estabilidade e suaviza o vôo, especialmente em condições de vento. Para iniciantes e pilotos de baixa jornada, o sistema de estabilização de voo facilita ainda mais o voo. Ele utiliza um MCU de 32 bits para resposta de controle ultrarrápida e possui 3 configurações, giroscópio desligado, giroscópio ligado e modo de treinamento. No modo de treinamento, o giroscópio oferece total estabilidade e também limita a quantidade de rolagem e inclinação que podem ser usadas. No modo giroscópio, isso proporciona uma estabilidade um pouco menos auxiliada e não limita a rotação ou inclinação que pode ser usada, perfeita para acrobacias suaves no estilo jato. No modo giroscópio desligado, é exatamente isso, sem giroscópio.

This fantastic looking XFly 80mm EDF jet is a detailed scale model of the French Air Force Alpha Jet, it is packed full of scale details including molded-in panel lines, a simulated antenna, a crystal clear canopy with cockpit detail, removable gun pod, and much more. Scale features include servoless retracts with CNC machined scale, sprung oleos and sequenced gear doors, functional LED nav and landing lights, operational flaps, and full-flying horizontal stabs. Take your scale flying experience to another level with this impressive 6S-powered XFLY Alpha Jet in a French Air Force color scheme.

This fantastic-looking XFly 80mm EDF jet is a detailed scale model of the Dassault/Dornier Alpha Jet, this version is in the color scheme of the famous Patrouille de France aerobatic team. It is packed full of scale details including molded-in panel lines, a simulated antenna, a crystal clear canopy with cockpit detail, and much more. Scale features include servoless retracts with CNC machined scale, sprung oleos and sequenced gear doors, functional LED nav and landing lights, operational flaps, and full-flying horizontal stabs. Take your scale flying experience to another level with this impressive 6S-powered XFLY Alpha Jet in the classic Patrouille de France color scheme.

The XFLY T-7A Red Hawk 750mm EDF jet is an easy-to-fly, versatile EDF trainer that will appeal to a wide variety of pilots, including those with limited experience in flying EDF jets. The 4S compatible power system includes a 12-bladed 64mm fan unit that delivers ample power for an abundance of thrust, speed, and an incredible turbine-like sound. The full-size Boeing-Saab T-7 Red Hawk (originally known as the Boeing T-X) is an American/Swedish advanced jet trainer that was designed to replace the popular Northrop T-38 Talon. The design is smaller, but very similar to the McDonnell Douglas F/A-18 with its large leading edge root extensions, and V-shaped twin vertical tail design. These design features give the full-size incredible maneuverability and excellent low-speed handling, these attributes carry over extremely well to the XFLY model of the T-7A Red Hawk.

The XFLY Sukhoi Su-27 Flanker 750mm EDF jet is an easy-to-fly, great-looking, and versatile scale EDF model that will appeal to a wide variety of pilots, including those with limited experience in flying EDF jets. The 4S-compatible power system includes twin 12-bladed 50mm fan units that deliver an abundance of power for excellent thrust, loads of speed, and an incredible turbine-like sound. The full-size Sukhoi Su-27 Flanker is a long-range air defense jet fighter that was designed as a direct competitor to the McDonnell Douglas F-14. The swept-back wing configuration gives the Su-27 excellent slow-speed handling and short-field capabilities, but it also allows for high maneuverability at speed. These design attributes carry over extremely well to the XFLY model of the Sukhoi Su-27.

The XFLY Sukhoi Su-27 Flanker 750mm EDF jet is an easy-to-fly, great-looking, and versatile scale EDF model that will appeal to a wide variety of pilots, including those with limited experience in flying EDF jets. The 4S-compatible power system includes twin 12-bladed 50mm fan units that deliver an abundance of power for excellent thrust, loads of speed, and an incredible turbine-like sound. The full-size Sukhoi Su-27 Flanker is a long-range air defense jet fighter that was designed as a direct competitor to the McDonnell Douglas F-14. The swept-back wing configuration gives the Su-27 excellent slow-speed handling and short-field capabilities, but it also allows for high maneuverability at speed. These design attributes carry over extremely well to the XFLY model of the Sukhoi Su-27.

This fantastic-looking XFly 80mm EDF jet is a detailed scale model of a US Airforce T-7A Red Hawk advanced trainer. It is packed full of scale details including molded-in panel lines, simulated antenna, pitot tube, a crystal clear canopy with cockpit detail, missiles, drop tanks, and much more. Scale features include servoless retracts with CNC machined scale, sprung oleos and sequenced gear doors, functional LED nav and landing lights, full-flying horizontal stabs, and operational flaps.

The XFLY Eagle Twin is an innovative racing model with twin EDF motors on each wing tip, this is a radical configuration and allows for a large area in the middle of the fuselage for batteries, and other equipment. The included power system gives a power-to-weight ratio of over 1:15 which allows for easy hand-launching and an incredible performance. Top speeds of over 110mph are achievable and a special EDF mixing configuration makes the Eagle capable of performing differential maneuvers including flat spins, inverted flat spins, and other challenging aerobatic maneuvers.

The XFLY Eagle Twin is an innovative racing model with twin EDF motors on each wing tip, this is a radical configuration and allows for a large area in the middle of the fuselage for batteries, and other equipment. The included power system gives a power-to-weight ratio of over 1:15 which allows for easy hand-launching and an incredible performance. Top speeds of over 110mph are achievable and a special EDF mixing configuration makes the Eagle capable of performing differential maneuvers including flat spins, inverted flat spins, and other challenging aerobatic maneuvers.

The XFLY A-10 Thunderbolt II is a small, scale twin-EDF model of the iconic US Air Force close attack fighter that is perfect for flying in smaller areas such as local parks, sports fields, etc. The full-size A-10 Thunderbolt affectionately known as the "Warthog", was mainly used for close air support for ground troops and armored vehicles. It was highly maneuverable due to its large ailerons, was very tough and durable, could take a lot of punishment, and it "pièces de résistance" was the Gatling gun mounted in the nose. The actual airframe was designed around this high-powered 30mm gun, it was one of the most powerful guns ever fitted to a plane and could fire up to an amazing 4,200 rounds per minute.

O H-King Viper 64 é acessível, muito estável e tem qualidades de manobrabilidade previsíveis, o que o torna a escolha ideal para a sua primeira aventura a pilotar jactos EDF. Tem uma aparência deslumbrante, e o desempenho da sua configuração de 6S dá-lhe uma fantástica velocidade e a capacidade de realizar grandes manobras ao estilo de um jato, o que o torna também o jato desportivo perfeito para o piloto RC mais experiente. O H-King Viper 64 é baseado num pequeno avião a jato de dois lugares, concebido pela Viper Aircraft Corporation nos Estados Unidos no final da década de 1990.

XFLY is continuing to expand its incredible range of EDF models with this fantastic-looking Lockheed Martin F-22 Raptor. It is a small, scale twin-EDF model of the supersonic all-weather stealth fighter that was developed for the United States Air Force. The US Air Force requirement was for an advanced tactical fighter to replace the F-15 Eagle and the F-16 Fighting Falcon that had the capability of competing with the Su-27 Flanker, and MiG-29 Fulcrum.

Avios has excelled yet again in bringing you another interesting and high-quality RC model, the Avios PBY Catalina. Avios are at the forefront of water plane technology; they have produced more types than any other manufacturer in this class of model. The Avios model captures the looks and great flying characteristics of the full-size plane with this stand-off scale model of the iconic World War II flying boat. The Catalina was one of the most widely used flying boats of the 2nd World War. It served with every branch of the United States Armed Forces, and the Avios version depicts a Catalina in the stunning US Coast Guard scheme of the early 1940s era.

This third version of the Durafly DH 100 Vampire follows on from its predecessors to deliver a fantastic even better version of this popular EDF jet. We have added many more improvements so that the best has got even better. These new improvements include, additional carbon-fiber reinforcement, simplified and lighter landing gear struts, improved ducting and thrust pipe for increased performance, plastic nose for added protection, and plastic retract mount fairings.

This version of the Vampire DH100 is finished in a Royal Canadian Air Force (RCAF) color scheme, this scheme was selected for its history and its orientation when flying. The RCAF obtained their Vampires in late 1948, and being their Air Force's first-ever jet fighter, they were an instant hit with the RCAF aircrew and pilots. The Vampire had an outstanding performance and graceful lines, this Durafly version captures these attributes beautifully.

The Supermarine Spitfire is the most famous fighter plane from the Second World War, and the Mk.1a defines where its history started. This Avios model represents an early WW2 version that came out just before the "Battle of Britain". It looks stunning and is possibly the best-looking and best-flying foam Spitfire on the market today. At this point, we would like to give thanks to Tom Hunt, whose drawings the Avios Spitfire Mk.1a is based on, and it is one of the main reasons why this Avios Spitfire (just like its smaller brother from Durafly) flies so well.. The Mk.1a has that truly iconic shape and lines of the Supermarine Spitfire as it was seen through the eyes of its original designer, R.J. Mitchell. The upper surfaces have a brand new, authentic early WW2 camouflage color scheme, with a black and white scheme underneath. This scheme was used from 1938 and during the "Phony War" on RAF fighters to help the observation of friendly aircraft from the ground. The Avios Spitfire Mk.1a is a poignant and fitting tribute to the pilots who flew them during these early years of aerial combat.

Unleash the power and prestige of the limited edition Black Viper 64. This exclusive 6S EDF jet combines stunning looks with explosive speed and beginner-friendly stability.

Strike with style! The H-King Viper 64 EDF Jet has been reborn in a sinister new scheme for a limited edition release. Dressed in a sleek silver and black paint job with a menacing Snake Head logo, this jet is as fast as it looks. Powered by a robust 6S setup, it delivers a breathtaking turn of speed and a realistic turbine-like sound that guarantees to command attention at your flying field.

O HobbyKing® ™ morsa é um modelo muito capaz, divertido que agrada a ambos os novos e experientes pilotos da mesma forma, fácil de voar e fácil de construir, a morsa é grande valor para o dinheiro!

Feito de espuma EPO difícil, a morsa é simples de montar, os adesivos coloridos são pré-aplicado e o motor brushless outrunner, ESC e todos os servo de são pré-instalados, até mesmo o suporte dobrável e giratório ter sido montado na fábrica! Bem como sendo fácil de montar, a morsa é muito prático e apresenta uma dura, CF reforçou 2pc Plug-in-asa e uma grande área de copa que lhe permite atender a uma ampla gama de pacotes de LiPoly, é um pouco proporções obesos também fazer o Walrus super fácil de mão-lançamento. O grande esquema olhar é perfeito para orientação e é o tamanho atraente dá a morsa abundância de presença, bem como a capacidade de lidar com um pouco de vento.

Não há nenhuma dúvida a versatilidade deste planador soberbamente preço, é perfeito para alguns grab gentil n voar deslizando mas o Walrus, também é surpreendentemente capaz como um esporte flyer, tornando-o perfeito para os novos pilotos a progredir com como eles ficam mais confiantes. A velocidade da morsa em WOT é bastante surpreendente e com abas como equipamento de série, também é capaz de voar incrivelmente lento, esta combinação dá a morsa um envelope de vôo impressionante para um "preços razoáveis" planador espumoso! Não pode haver dúvida, independentemente da sua experiência de vôo ..... você não pode ir mal com uma morsa!

Características:
• Plug and Fly - Basta adicionar a sua própria bateria e rádio e voe!
• Construção EPO espuma super resistente
• fácil e rápido ao Monte
• Flaps equipado de série
• Ampla vôo Envelope
• 2pc Plug In Asa para transporte fácil
• Esquema é excelente para Orientação
• Asa Stiff com CF Joiner

inclui:
Todos Hardware
Hook & Loop fita
manual de foto
Y-Leads

especificações:
Envergadura: 1400 milímetros
Comprimento: 1036 milímetros
Área Wing: 22.30dm2
Voar Peso: 750g
Motor: 2212 Brushless Outrunner 1350kv
ESC: 20A w / BEC
Servo: 9g x 6

exige:
Sua própria 5-6 Canal Transmissor e Receptor
2200mAh 3s 20c Lipoly Bateria
carregador de bateria