Aviões

Introduzindo nosso EPP 3D MX2. Com um design fantástico e layout, isso tudo EPP 3D'er irá satisfazer os pilotos 3D mais ansiosos!

É fuselagem é resistente a torções muito rígida ainda leve com cargas de espaço debaixo da escotilha superior longa para o seu rádio e sistema de energia. A asa é um caso de uma peça com construção EPP, um aerofólio simétrico muito preciso com 2 mastros adicionais para minimizar flex e torcer. As superfícies de controle são outra coisa - o elevador, leme e ailerons apresentam uma construção de 3 camadas (Epp-Depron-PPE) para fazer superfícies rígidas e NÃO à flexão à extrema joga! Snap rolls 'Snap' e resposta de controle é instantânea.

A luz - ainda rígida - fuselagem acrescenta-se a um grande voando 3D 'espumoso'. Cachoeiras, harriers, giros planos, círculos de rolamento este modelo tem a precisão para executar estas e quaisquer outros movimentos que você pode pensar!

Montagem da célula em um processo rápido de 10-15 minutos com a ajuda de um pouco de forma CA. Os layouts de rádio e do sistema de potência são muito simples, a longo escotilha superior fazendo para fácil acesso.

Este é um grande modelo para o parque de vôo em geral e 3D incondicional. Você será duramente pressionado para quebrar este modelo, vai levar duros golpes e manter apenas saltar para trás todas as vezes!


Características:
• material de EPP resistente, leve e resistente acidente
• Superfícies de controle composto EPP / depron Stiff
• Design revolucionário aumenta a integridade estrutural e a rigidez da estrutura do avião
• Leve fornece carga de asa optimal
• Excelente desempenho acrobático e manobrabilidade 3D.
• O design simples permite fácil acesso e instalação dos equipamentos
• A se destacar esquema de cores grande para orientação


especificações:
Envergadura: 955 milímetros
Comprimento: 945 milímetros
Área Wing: 15.2dm2
Peso: 550g (sem bateria)




exige:
sistema de rádio 4 canais
2217 950-1100KV Brushless outrunner
30Amp ESC
3S 11.1V 1100-1300MAH Li-Po
10x4.7 / hélice 11x4.7
4 x servos 9g

Avios Yakovlev Yak-52 Esquema HobbyKing substituição Canopy.

Fuselagem substituição. Vem com ímãs e acessórios de plástico, mas não inclui capuz.

Substituição ala principal vem com chifres de controle instalados.

Durafly® ™ Messerschmitt Bf.110 - Substituição Radiator Set (1pair)

Do you feel the need for speed? Then this great-looking, extremely fast Rare Bear Reno Racer from Durafly is for you. It is supplied as a Plug-N-Fly model with minimal parts count, so assembly is quick and simple. There is no gluing required, just one screw holds the tail components in place, and 1 screw for the wing. Battery and radio access is via the large magnetically held canopy hatch, so radio installation and battery changes are very easy and straightforward.

Esta terceira versão do Durafly DH 100 Vampire segue o exemplo dos seus antecessores para oferecer uma versão fantástica e ainda melhor deste popular jato EDF. Adicionámos muitos mais melhoramentos para que o melhor se torne ainda melhor. Estes novos melhoramentos incluem: reforço adicional em fibra de carbono, suportes do trem de aterragem simplificados e mais leves, condutas e tubos de impulsão melhorados para aumentar o desempenho, nariz de plástico para maior proteção e carenagens de plástico para montagem do retractor.

Do you feel the need for speed? Then this great-looking, extremely fast Rare Bear Reno Racer from Durafly is for you. It is supplied as a Plug-N-Fly model with minimal parts count, so assembly is quick and simple. There is no gluing required, just one screw holds the tail components in place, and 1 screw for the wing. Battery and radio access is via the large magnetically held canopy hatch, so radio installation and battery changes are very easy and straightforward.

Esta versão H-King deste impressionante F-18 Super Hornet é fabricada em espuma EPO e tem um belo acabamento em um esquema de cores autêntico da USAF com os decalques pré-aplicados na fábrica. O H-King F-18 possui excelentes características de voo por si só, voa como se estivesse sobre trilhos, mas o giroscópio ORX de 6 eixos pré-instalado leva isso a outro nível. Pilotos de todos os níveis de experiência se beneficiarão do uso da configuração intermediária do giroscópio, isso realmente melhora a estabilidade e suaviza o vôo, especialmente em condições de vento. Para iniciantes e pilotos de baixa jornada, o sistema de estabilização de voo facilita ainda mais o voo. Ele utiliza um MCU de 32 bits para resposta de controle ultrarrápida e possui 3 configurações, giroscópio desligado, giroscópio ligado e modo de treinamento. No modo de treinamento, o giroscópio oferece total estabilidade e também limita a quantidade de rolagem e inclinação que podem ser usadas. No modo giroscópio, isso proporciona uma estabilidade um pouco menos auxiliada e não limita a rotação ou inclinação que pode ser usada, perfeita para acrobacias suaves no estilo jato. No modo giroscópio desligado, é exatamente isso, sem giroscópio.

Durafly™ Bf.109E 1100mm Battle of Britain Scheme - Horizontal Tail

O modelo é fabricado em espuma EPO forte, com os altos padrões usuais que você espera desta linha de aviões RC. Tal como acontece com a maioria dos outros modelos Durafly, vem "Plug N Fly". Isso significa que é fornecido com uma estrutura fácil de montar, poderoso motor brushless 3719-770KV pré-instalado, Aerostar 40A ESC e 4 servos digitais de 9g pré-instalados. Uma folha de decalque de vinil está incluída, ela precisará ser aplicada durante o processo de construção, isso lhe dá a opção de usar o acabamento prateado como base para criar seu próprio esquema de cores. Uma vez que o modelo é montado, tudo que você precisa é a sua escolha de 4 canais ou mais receptor e uma bateria LiPo de 2200mAh 4S (14,8V).

This third version of the Durafly DH 100 Vampire follows on from its predecessors to deliver a fantastic even better version of this popular EDF jet. We have added many more improvements so that the best has got even better. These new improvements include, additional carbon-fiber reinforcement, simplified and lighter landing gear struts, improved ducting and thrust pipe for increased performance, plastic nose for added protection, and plastic retract mount fairings.

This version of the Vampire DH100 is finished in a Royal Canadian Air Force (RCAF) color scheme, this scheme was selected for its history and its orientation when flying. The RCAF obtained their Vampires in late 1948, and being their Air Force's first-ever jet fighter, they were an instant hit with the RCAF aircrew and pilots. The Vampire had an outstanding performance and graceful lines, this Durafly version captures these attributes beautifully.

Kingcraft Pitts Special S-2B 1200mm Replacement L/R Lower Wing Set.

Durafly™ Supermarine Spitfire Mk24 V2 - Replacement Spinner

Welcome to the ultimate scale experience. The Avios Spitfire Mk5 has been built using super scale, a new modelling technique that allows for incredible detail. Featuring more artistry than the 1100mm Spitfire, the larger model has visible panel lines, exhaust, cannons, and scale split flaps with turn indicators for added realism.

This H-King version of the classic P-51D warbird is manufactured in a superbly finished EPO foam in an authentic blue and silver color scheme with all the decals pre-applied. This is the updated V2 version of this popular model and it now comes with a built-in 6 axis ORX flight stabilization system to make it even easier to fly. The stabilization system utilizes a 32bit MCU and a 6 axis digital gyro for ultra-fast control response, it can also be switched from beginner mode to expert mode.

The Yak-11 was designed as an advanced trainer for use by the Soviet Air Force and came into service in 1947. The pilot and instructor sat in tandem under a long canopy that had separate sliding hoods. Although designed as a trainer, Yak-11s were also used in combat during the Korean War, and more recently, highly modified ones have been used very successfully for air racing. The Steadfast was built from scratch as an out-and-out high-performance single-seat racer in Romania in the early 2000s. It was based on the Yak-3, but essentially it looks the same as a Yak-11, so our model is based on our previous Yak-11 model.

The H-King Yak Steadfast is supplied with a power train that has been developed for pure speed. Using a 6S LiPo pack, the 5020-550KV brushless motor with the supplied 85A ESC and 16x6 prop will give it an incredible turn of speed of over 100 mph. It is very quick, and seeing a model of this impressive size doing fast pylon turns near the ground is a sight to behold. Aerobatics are also a dream to perform, the rolls are very axial, and looping maneuvers are big due to the abundance of power. The only limitations to the aerobatics it will perform are your flying skills.

O Durafly Me-163B foi projetado para pilotos com alguma experiência, se beneficia de um incrível desempenho de voo, grande estabilidade em toda a sua faixa de velocidade e, como o real, é incrivelmente rápido. Acrobacias, incluindo loops enormes, rolos verticais fora de vista e passes baixos muito rápidos, são facilmente alcançáveis, mas diminuem a velocidade e são muito estáveis, sem indícios de estol. Usando a bateria LiPo de 2200mAh 30-65C 4S recomendada e a hélice 6x4 fornecida, você pode esperar tempos de voo muito além de 5 minutos e uma abundância de energia. Se você gosta de velocidade e modelos muito rápidos, então este é para você, o Komet Me-163 é balístico, com velocidades próximas a 160km/h.

The XFLY A-10 Thunderbolt II is a small, scale twin-EDF model of the iconic US Air Force close attack fighter that is perfect for flying in smaller areas such as local parks, sports fields, etc. The full-size A-10 Thunderbolt affectionately known as the "Warthog", was mainly used for close air support for ground troops and armored vehicles. It was highly maneuverable due to its large ailerons, was very tough and durable, could take a lot of punishment, and it "pièces de résistance" was the Gatling gun mounted in the nose. The actual airframe was designed around this high-powered 30mm gun, it was one of the most powerful guns ever fitted to a plane and could fire up to an amazing 4,200 rounds per minute.

This striking version of the Durafly T-28 Trojan comes in a unique color scheme for the Naval Aviation Centennial (1911-2011) (US Navy). The Durafly T-28 is an impressive RC plane to fly and even has the ability to be upgraded for the extreme challenge of FPV flying.

The XFLY Partenavia P68 is a small, semi-scale twin-engined model that is perfect for flying in small areas such as local parks, sports fields, etc. It has been designed to be extremely easy to fly and assemble, which makes it perfect as an entry-level choice for the novice pilot. The design is based on the full-size Partenavia P68 which is a 6-seater, twin-engined high-wing monoplane that is generally used for light transport and training.

The XFLY T-7A Red Hawk 750mm EDF jet is an easy-to-fly, versatile EDF trainer that will appeal to a wide variety of pilots, including those with limited experience in flying EDF jets. The 4S compatible power system includes a 12-bladed 64mm fan unit that delivers ample power for an abundance of thrust, speed, and an incredible turbine-like sound. The full-size Boeing-Saab T-7 Red Hawk (originally known as the Boeing T-X) is an American/Swedish advanced jet trainer that was designed to replace the popular Northrop T-38 Talon. The design is smaller, but very similar to the McDonnell Douglas F/A-18 with its large leading edge root extensions, and V-shaped twin vertical tail design. These design features give the full-size incredible maneuverability and excellent low-speed handling, these attributes carry over extremely well to the XFLY model of the T-7A Red Hawk.

caracterizou por mudanças progressivas nos aviões civis e militares. O Beechcraft D17S Staggerwing é um biplano americano rápido, graças ao seu grande mas leve motor radial, e foi também um dos primeiros a ter uma cabina confortável, fechada e de estilo executivo.

This great-looking EDF sports jet is the one you have all been waiting for, and it has one of the lowest all-up weights in its class, it is a good 500g lighter than comparable models that are available on the market today. It is a sport scale design and is based on the iconic BAE Hawk trainer as used by military air forces all over the world. This easy-to-assemble model has been termed as an almost ready-to-fly-plus, it is completely built out of the box, the wings, all-flying horizontal stabilizers, and vertical stabilizer just bolt-on, and pre-installed are a set of all-metal electronic retracts with doors, sequencer control box, and lightweight wheels, 11 high-torque, metal-geared digital servos, and a set of pre-installed, day-bright LED lights. The Sports Hawk comes pre-painted in a Formula One-inspired paint scheme and includes a set of HobbyKing brand decals that you can apply if you wish. The pre-painted Sport Hawk color scheme lends itself nicely to having other sponsorship decals being applied, or you could even repaint it in a custom color scheme, the choice is yours. A nice touch is the removable base to the cockpit area which makes it very easy to add a pilot and more cockpit detail if you wish.

After listening to customer feedback the Durafly team has designed this, stunningly painted, Red Edition Me-163 Komet. It is based on the plane that EK16 commander, Wolfgang Spate, flew on the first operational mission. After this flight the plane was returned to it's more traditional color scheme. As well as this stunning color the Durafly team has incorporated a wider tracked 'dolly' to improve ground handling during take-off. The Durafly Me-163 is in itself a truly a ground breaking model. Not only does this Komet feature a fully working scale 'dolly' style undercarriage, blistering performance and a high-quality finish, but it is designed out of the box to accept a model rocket engine! In its Plug and Fly (PnF) form, Durafly's 950mm (37.5") span Me-163 comes with all electronics pre-installed and ready to hook up to your choice of 6ch receiver. A minimal part count allows assembly to be completed in just a few steps. The molded EPO has a highly detailed surface finish externally, carbon reinforcement internally and features a color matched hard plastic belly skid. It also has good access to all electronics via the battery/canopy hatch, excellent cooling through out and of course a very authentic looking scheme. Quality is definitely the name of the game.

Unleash the power and prestige of the limited edition Black Viper 64. This exclusive 6S EDF jet combines stunning looks with explosive speed and beginner-friendly stability.

Strike with style! The H-King Viper 64 EDF Jet has been reborn in a sinister new scheme for a limited edition release. Dressed in a sleek silver and black paint job with a menacing Snake Head logo, this jet is as fast as it looks. Powered by a robust 6S setup, it delivers a breathtaking turn of speed and a realistic turbine-like sound that guarantees to command attention at your flying field.

Este pequeno avião de grande aspeto capta a era dourada da aviação, que se caracterizou por mudanças progressivas nos aviões civis e militares. O Beechcraft D17S Staggerwing é um biplano americano rápido, graças ao seu grande mas leve motor radial, e foi também um dos primeiros a ter uma cabina confortável, fechada e de estilo executivo.