Aviões

The Hobbyking H-King Mini L-39 has been developed from an earlier version that had a 50mm fan unit. This latest rendition from RC L39 aircraft sports an uprated 64mm 8-blade EDF fan unit with a 2220-3300KV brushless outrunner motor, a 50A ESC, and uses a 4S LiPo battery instead of the original 3S setup. The full-size L-39 jet was designed in the Czech Republic as a high-performance jet trainer for performing basic to advanced pilot training. It was the first trainer aircraft in the world to be equipped with a turbofan.

The H-King A-1 Skyraider PNF is a realistic flying model of the original plane. It is made of strong EPO foam and is electric-powered which makes it ideal as a park flier. There is a built-in Gyro (or Flight Stabilizer) to make flying this plane even easier.

This H-King version of the classic P-51D warbird is manufactured in a superbly finished EPO foam in an authentic blue and silver color scheme with all the decals pre-applied. This is the updated V2 version of this popular model and it now comes with a built-in 6 axis ORX flight stabilization system to make it even easier to fly. The stabilization system utilizes a 32bit MCU and a 6 axis digital gyro for ultra-fast control response, it can also be switched from beginner mode to expert mode.

This H-King version of the classic F4U Corsair warbird is manufactured in a superbly finished EPO foam in an authentic navy color scheme with the decals pre-applied. The Corsair is a very stable flyer in its own right, for most pilots, the gyro is not necessary. However, for beginners and low hours pilots, a 6 axis ORX flight stabilization system is supplied which makes it even easier to fly. The stabilization system utilizes a 32bit MCU and a 6-axis digital gyro for ultra-fast control response, it can be switched from beginner to expert mode as your experience grows.

The H-King P51 "Galloping Ghost" is the first in a new mini-series from H-King, the "Reno Aces", WW2 fighters dressed to impress at the air races. The P-51 "Galloping Ghost" with the included stock 3108-1070KV brushless motor offers a really quick model straight out of the box with speeds approaching 100mph when using the recommended 2200mah 4S lipo. However, if you are an experienced hand and are looking for 100+ mph speeds then there is the optional drop-in fit 3108-1170KV 'Pro' brushless motor. This will give your great-looking Reno Ace a really ballistic performance on the same prop, ESC, and 4S battery for those that can handle the extra rotational torque on launch.

Esta versão H-King deste impressionante F-16 Fighting Falcon é fabricada em espuma EPO e tem um belo acabamento em um esquema de cores autêntico da USAF com os decalques pré-aplicados na fábrica. O H-King F-16 possui excelentes características de voo por si só, voa como se estivesse sobre trilhos, mas o giroscópio ORX de 6 eixos pré-instalado leva isso a outro nível. Pilotos de todos os níveis de experiência se beneficiarão do uso da configuração intermediária do giroscópio, isso realmente melhora a estabilidade e suaviza o vôo, especialmente em condições de vento. Para iniciantes e pilotos de baixa jornada, o sistema de estabilização de voo facilita ainda mais o voo. Ele utiliza um MCU de 32 bits para resposta de controle ultrarrápida e possui 3 configurações, giroscópio desligado, giroscópio ligado e modo de treinamento. No modo de treinamento, o giroscópio oferece total estabilidade e também limita a quantidade de rolagem e inclinação que podem ser usadas. No modo giroscópio, isso proporciona uma estabilidade um pouco menos auxiliada e não limita a rotação ou inclinação que pode ser usada, perfeita para acrobacias suaves no estilo jato. No modo giroscópio desligado, é exatamente isso, sem giroscópio.

This fantastic looking XFly 80mm EDF jet is a detailed scale model of the French Air Force Alpha Jet, it is packed full of scale details including molded-in panel lines, a simulated antenna, a crystal clear canopy with cockpit detail, removable gun pod, and much more. Scale features include servoless retracts with CNC machined scale, sprung oleos and sequenced gear doors, functional LED nav and landing lights, operational flaps, and full-flying horizontal stabs. Take your scale flying experience to another level with this impressive 6S-powered XFLY Alpha Jet in a French Air Force color scheme.

This fantastic-looking XFly 80mm EDF jet is a detailed scale model of the Dassault/Dornier Alpha Jet, this version is in the color scheme of the famous Patrouille de France aerobatic team. It is packed full of scale details including molded-in panel lines, a simulated antenna, a crystal clear canopy with cockpit detail, and much more. Scale features include servoless retracts with CNC machined scale, sprung oleos and sequenced gear doors, functional LED nav and landing lights, operational flaps, and full-flying horizontal stabs. Take your scale flying experience to another level with this impressive 6S-powered XFLY Alpha Jet in the classic Patrouille de France color scheme.

The XFLY Sukhoi Su-27 Flanker 750mm EDF jet is an easy-to-fly, great-looking, and versatile scale EDF model that will appeal to a wide variety of pilots, including those with limited experience in flying EDF jets. The 4S-compatible power system includes twin 12-bladed 50mm fan units that deliver an abundance of power for excellent thrust, loads of speed, and an incredible turbine-like sound. The full-size Sukhoi Su-27 Flanker is a long-range air defense jet fighter that was designed as a direct competitor to the McDonnell Douglas F-14. The swept-back wing configuration gives the Su-27 excellent slow-speed handling and short-field capabilities, but it also allows for high maneuverability at speed. These design attributes carry over extremely well to the XFLY model of the Sukhoi Su-27.

The XFLY Sukhoi Su-27 Flanker 750mm EDF jet is an easy-to-fly, great-looking, and versatile scale EDF model that will appeal to a wide variety of pilots, including those with limited experience in flying EDF jets. The 4S-compatible power system includes twin 12-bladed 50mm fan units that deliver an abundance of power for excellent thrust, loads of speed, and an incredible turbine-like sound. The full-size Sukhoi Su-27 Flanker is a long-range air defense jet fighter that was designed as a direct competitor to the McDonnell Douglas F-14. The swept-back wing configuration gives the Su-27 excellent slow-speed handling and short-field capabilities, but it also allows for high maneuverability at speed. These design attributes carry over extremely well to the XFLY model of the Sukhoi Su-27.

This fantastic-looking XFly 80mm EDF jet is a detailed scale model of a US Airforce T-7A Red Hawk advanced trainer. It is packed full of scale details including molded-in panel lines, simulated antenna, pitot tube, a crystal clear canopy with cockpit detail, missiles, drop tanks, and much more. Scale features include servoless retracts with CNC machined scale, sprung oleos and sequenced gear doors, functional LED nav and landing lights, full-flying horizontal stabs, and operational flaps.

The XFLY Eagle Twin is an innovative racing model with twin EDF motors on each wing tip, this is a radical configuration and allows for a large area in the middle of the fuselage for batteries, and other equipment. The included power system gives a power-to-weight ratio of over 1:15 which allows for easy hand-launching and an incredible performance. Top speeds of over 110mph are achievable and a special EDF mixing configuration makes the Eagle capable of performing differential maneuvers including flat spins, inverted flat spins, and other challenging aerobatic maneuvers.

The XFLY Eagle Twin is an innovative racing model with twin EDF motors on each wing tip, this is a radical configuration and allows for a large area in the middle of the fuselage for batteries, and other equipment. The included power system gives a power-to-weight ratio of over 1:15 which allows for easy hand-launching and an incredible performance. Top speeds of over 110mph are achievable and a special EDF mixing configuration makes the Eagle capable of performing differential maneuvers including flat spins, inverted flat spins, and other challenging aerobatic maneuvers.

The Dancing Wings Hobby S.E.5A is a detailed scale model of the famous World War 1 biplane fighter. The kit comes almost ready to fly and is constructed in balsa for a strong, lightweight, authentic structure. A lot of scale detail is supplied including, scale exhausts, scale wheels, and a dummy machine gun, plus a full accessory kit is also supplied which includes all the necessary hardware including scale rigging to complete the kit.

O H-King Viper 64 é acessível, muito estável e tem qualidades de manobrabilidade previsíveis, o que o torna a escolha ideal para a sua primeira aventura a pilotar jactos EDF. Tem uma aparência deslumbrante, e o desempenho da sua configuração de 6S dá-lhe uma fantástica velocidade e a capacidade de realizar grandes manobras ao estilo de um jato, o que o torna também o jato desportivo perfeito para o piloto RC mais experiente. O H-King Viper 64 é baseado num pequeno avião a jato de dois lugares, concebido pela Viper Aircraft Corporation nos Estados Unidos no final da década de 1990.

Take to the skies with this durable glider with optional FPV camera mounting. The Ranger 1600 is easy to assemble and features a large wingspan for stability in the air. The airfoil wings are fitted with two spars to strengthen the wings in high wind situations. Use the wing clips to click and plug the wings into the fuselage. After flying, simply squeeze the clips to release the wings and easily store the plane in your car.

Take to the skies with this durable glider with optional FPV camera mounting. The Ranger 2000 is easy to assemble and features a large wingspan for stability in the air. The airfoil wings are fitted with two spars to strengthen the wings in high wind situations. Use the wing clips to click and plug the wings into the fuselage. After flying, simply squeeze the clips to release the wings and easily store the plane in your car.

Improving on the popular Bixler 2, this latest kit is the perfect trainer plane or inexpensive FPV platform. Attach your flight camera into the nose or canopy of the plane to enjoy First Person View while flying. The Bixler 3 kit requires a motor, ESCs, a radio system and battery. 

If you're looking for a fast, fun, aerobatic sports model that can be flown just about anywhere, the H-King Super Kinetic is what you're after! From high-speed aerobatics including pylon style "bank and yank" flying to off-power gliding, the H-King Super Kinetic handles it all with ease. It's a truly versatile model that is a blast to fly.

O Bixler 1.1 é um avião RC elétrico comprovado para iniciantes até pilotos intermediários. Bem conhecido pela estabilidade, durabilidade e preço acessível, o Bixler 1.1 é um dos melhores aviões RC para iniciantes do mercado. É também uma excelente escolha como uma plataforma FPV barata e perfeita para aquelas tardes preguiçosas de fim de semana.

The Ranger 2400 is a large electric powered pusher glider that has been specifically designed for FPV flying.  The enormous fuselage has plenty of room for large capacity or twin battery packs, radio and stabilizer components, FPV equipment, and molded into the front just below the nose is a purpose-made provision for an FPV camera. Also included is the usual Volantex camera mount that can take the place of the black canopy if you wish. Assembly is quick and easy with no glue required, the vertical fin and horizontal stabilizer are simply screwed to the rear of the fuselage. The EPO wings are fitted with a carbon spar for strength and 2 robust metal spars join the wings to the fuselage. Also, each of the large ailerons is reinforced with carbon to eliminate any chance of distortion or twisting. The wings are attached to the fuselage using the popular Volantex fast connect clips, after flying, simply squeeze the clips to release the wings.

This version of the popular Piper J-3 Cub is in a striking new Swiss color scheme which is a must for all scale pilots. This color scheme uses a lot less paint so there is a bit of a saving in weight which further reduces the already low wing loading. The attention to detail makes it an extremely realistic model, and it comes with a nice, generous size 1400mm wingspan. Like all Cub's with its large wingspan, and stable flying characteristics it is very easy to fly, perfect for low-hour pilots and experts alike. The Swiss Cub also has a new all-metal landing gear which is virtually indestructible, this will survive the hardest of landings. Further weight saving has been achieved by the removal of the metal tail bracing wires, these have been replaced with scale-looking, easy to fit, lightweight elasticated white shock chord.