Aeronave

Durafly Tundra V2 (PNF) - Laranja / Cinza- 1300mm (51") Modelo Esportivo com abasO Tundra se estabeleceu firmemente na comunidade RC e agora se tornou o modelo de avião elétrico RC para a maioria dos pilotos RC. De pilotos intermediários ao piloto mais experiente, este avião RC fará tudo. O Tundra é um avião extremamente versátil, muito divertido de voar e altamente divertido para todos os pilotos, com seu excelente potencial acrobático, habilidade de vôo STOL e robustez geral.

The Tundra has firmly established itself in the RC community and has now become the go-to electric RC plane for most RC pilots. From intermediate pilots to the more experienced flier this quality-built RC foam plane will do it all. The Tundra is an extremely versatile plane that is great fun to fly and is highly entertaining for all pilots with its excellent aerobatic potential, STOL flying ability, and all-round toughness.

A pre-painted replacement set of wing panels for the purple/gold Durafly Tundra V2. Supplied with ailerons and flaps pre-hinged, main carbon wing spar, and a set of control horns.

Note: This replacement spare part for the Durafly Tundra V2 is also compatible with the V1 Tundra. Please note you may need to repaint it due to the different color schemes in each version.

A pre-painted replacement set of wing panels for the orange/grey Durafly Tundra V2. Supplied with ailerons and flaps pre-hinged, main carbon wing spar, and a set of control horns.

Note: This replacement spare part for the Durafly Tundra V2 is also compatible with the V1 Tundra. Please note you may need to repaint it due to the different color schemes in each version.

A pre-painted replacement set of wing panels for the blue/red Durafly Tundra V2. Supplied with ailerons and flaps pre-hinged, main carbon wing spar, and a set of control horns.

Note: This replacement spare part for the Durafly Tundra V2 is also compatible with the V1 Tundra. Please note you may need to repaint it due to the different color schemes in each version.

The Tundra has had a massive cult following over the years within the RC community as it's easily one of the best flying electric RC planes on the market with an impressive flight envelope. This was followed sometime later with the launch of the Grand Tundra which encompassed all your favorite features but on a larger scale. The Grand Tundra Plus keeps 99% of the features of the original version, the one change that has been made is to the wing servo connectors, these have a new design to give a stronger and more reliable connection.

A replacement set of wings, spars, and LED's in blue/silver for the Grand Tundra Plus sport model.

Note: This replacement spare part for the AVIOS Grand Tundra Plus is also compatible with "Version 1". However, a small modification will need to be carried out to remove the servo connector set and replace with servo extension leads.

A replacement set of wings, spars, and LED's in green/gold for the Grand Tundra Plus sport model.

Note: This replacement spare part for the AVIOS Grand Tundra Plus is also compatible with "Version 1". However, a small modification will need to be carried out to remove the servo connector set and replace with servo extension leads.

Replacement tailplane and fin for the Durafly V2 Ugly Stick (Blue), the elevator and rudder come ready hinged and the fin includes decals.

Replacement landing gear for the Durafly V2 Ugly Stick (Blue).

Fuselagem de substituição para o Durafly Goblin Racer em amarelo / preto / prata.

Asa de substituição para o Durafly Goblin Racer em amarelo / preto / prata.

Plano traseiro e elevador de substituição para o Durafly Goblin Racer em amarelo / preto / prata.

Conjunto de aleta e leme de substituição para o Durafly Goblin Racer em amarelo / preto / prata.

Spinner preto de substituição para o Durafly Goblin Racer.

Motor sem escova de substituição 3536-1400KV para o Durafly Goblin Racer.

Replacement decal set for the Durafly Goblin Racer in Yellow/Black/Silver.

Replacement fuselage for the Durafly Goblin Racer in Pink/Blue/Black.

Replacement wing for the Durafly Goblin Racer in Pink/Blue/Black.

Replacement tailplane and elevator for the Durafly Goblin Racer in Pink/Blue/Black.

Replacement fin/rudder assembly for the Durafly Goblin Racer in Pink/Blue/Black.

A replacement fuselage with canopy for the Volantex Ranger 1600, and Ranger 2000 electric gliders.

The Ranger 2400 is a large electric powered pusher glider that has been specifically designed for FPV flying.  The enormous fuselage has plenty of room for large capacity or twin battery packs, radio and stabilizer components, FPV equipment, and molded into the front just below the nose is a purpose-made provision for an FPV camera. Also included is the usual Volantex camera mount that can take the place of the black canopy if you wish. Assembly is quick and easy with no glue required, the vertical fin and horizontal stabilizer are simply screwed to the rear of the fuselage. The EPO wings are fitted with a carbon spar for strength and 2 robust metal spars join the wings to the fuselage. Also, each of the large ailerons is reinforced with carbon to eliminate any chance of distortion or twisting. The wings are attached to the fuselage using the popular Volantex fast connect clips, after flying, simply squeeze the clips to release the wings.

The Phoenix V2 2000 is a quick and easy to assemble electric powered glider with flaps and large ailerons for a precise, aerobatic performance. The EPO wings are fitted with a carbon spar for strength and 2 metal spars join the wings to the fuselage. Also, each aileron is reinforced with carbon to eliminate any chance of distortion or twisting. The wings are attached to the fuselage using fast connect clips, after flying, simply squeeze the clips to release the wings.

The Phoenix 2400 is an extended wing version of the popular Phoenix 1600mm and 2000mm range of electric powered gliders. Assembly is quick and easy with no glue required, the vertical fin and horizontal stabilizer are simply screwed to the rear of the fuselage. The EPO wings are fitted with a carbon spar for strength and 2 metal spars join the wings to the fuselage. Also, each aileron is reinforced with carbon to eliminate any chance of distortion or twisting. The wings are attached to the fuselage using fast connect clips, after flying, simply squeeze the clips to release the wings.

A replacement canopy for the Volantex Ranger 1600, Ranger 2000, and Phoenix V2 electric aircraft.

A replacement horizontal stabilizer with elevator, and vertical stabilizer with rudder for the Volantex ASW 28, suitable for versions V2 and V3. 

A replacement wing set for the Volantex Ranger 2000, and Phoenix V2 electric aircraft.

A replacement fin, rudder, and horizontal stabilizer for the Volantex Ranger 2000, and Phoenix V2 electric aircraft.

A replacement wing set for the Volantex Ranger 2400, and Phoenix 2400 electric aircraft.

A replacement horizontal stabilizer with elevator, and vertical stabilizer with rudder for the Volantex Ranger 2400 and Phoenix 2400.

A replacement AVIOS Extra 330LX V2 left-wing with factory-applied decals.

Note: This replacement will also fit the AVIOS Extra 3300LX V1, but the color scheme will of course be different.

A replacement AVIOS Extra 330LX V2 right-wing with factory-applied decals.

Note: This replacement will also fit the AVIOS Extra 3300LX V1, but the color scheme will of course be different.

A replacement AVIOS Extra 330LX V2 horizontal stabilizer with hinged elevator and factory-applied decals.

Note: This replacement will also fit the AVIOS Extra 3300LX V1, but the color scheme will of course be different.