Aeronave

Welcome to the ultimate scale experience. The Avios Spitfire Mk5 has been built using super scale, a new modelling technique that allows for incredible detail. Featuring more artistry than the 1100mm Spitfire, the larger model has visible panel lines, exhaust, cannons, and scale split flaps with turn indicators for added realism.

The Ranger 2000 is easy to assemble and features a large wingspan which provides stability, and also allows the model to fly at slow speeds. The EPO wings are fitted with two spars for strength and each aileron is reinforced with carbon to eliminate any chance of distortion or twisting. The wings are attached to the fuselage using fast connect clips, after flying, simply squeeze the clips to release the wings.

The Phoenix V2 2000 is a quick and easy to assemble electric powered glider with flaps and large ailerons for a precise, aerobatic performance. The EPO wings are fitted with a carbon spar for strength and 2 metal spars join the wings to the fuselage. Also, each aileron is reinforced with carbon to eliminate any chance of distortion or twisting. The wings are attached to the fuselage using fast connect clips, after flying, simply squeeze the clips to release the wings.

The Phoenix 2400 is an extended wing version of the popular Phoenix 1600mm and 2000mm range of electric powered gliders. Assembly is quick and easy with no glue required, the vertical fin and horizontal stabilizer are simply screwed to the rear of the fuselage. The EPO wings are fitted with a carbon spar for strength and 2 metal spars join the wings to the fuselage. Also, each aileron is reinforced with carbon to eliminate any chance of distortion or twisting. The wings are attached to the fuselage using fast connect clips, after flying, simply squeeze the clips to release the wings.

The subject of this kit is the German liaison aircraft built during WW11, the Fieseler Fi 156 Storch. The Storch (German for "Stork") is famous for its STOL (Short Take-Off and Landing) abilities and it had an incredibly low stall speed of only 31mph. It was mainly used during WW11 for reconnaissance, spotting for the army and forward operations, and medical evacuation. Its design incorporated hinged slats along the entire length of the wings leading edge and a hinged and slotted set of control surfaces ran along each trailing edge, this was split equally to form outboard ailerons and inboard flaps. Virtually nothing about the Storch is streamlined with bits sticking out everywhere including the side windows,  this with its long undercarriage hanging down gives it a unique long-legged bird look which is why it was given the name of "Storch".

Esta versão do Yak-11 é baseada em um tamanho real que atualmente voa na Alemanha, o esquema de cores homenageia as unidades francesas que voaram para os russos na 2ª Guerra Mundial. Como mencionado acima, sendo a versão warbird é fornecido com um trem de força que foi desenvolvido para mais torque. Usando um pacote 6S LiPo, o motor brushless 5052-410KV com o ESC 95A e hélice 17x10 fornecidos ainda dará ao Yak-11 uma impressionante volta de velocidade de até 100mph, mas o desempenho vertical tem que ser visto para acreditar. Manobras de warbird em grande escala são um sonho de voar com a quantidade de torque e potência disponível, e as manobras de rolamento são muito axiais. Impressione os espectadores com flypasts lentos em forma de escala com flaps e as rodas para baixo, ou corridas de metralhamento rápidas e baixas e puxando para cima em um meio cubano oito ou uma manobra semelhante. O Yak-11 neste esquema de cores comemorativo parece fantástico de todos os ângulos ao voar ou ao sentar no chão.

The ZOHD Dart XL FPV flying wing airplane offers incredible lifting power, excellent handling, and portability, making it the ideal choice for long-range FPV flying. This "Enhanced Version" features a newly designed motor mount, a GPS bay with cover, built-in carbon fiber for strength, a new optimized airfoil, and a strengthened battery bay. The Dart XL incorporates Vortex generators and reversed wingtips for improved handling, lift efficiency, and yaw stability. It also has a computer-designed airflow pod that maximizes the cooling to all the onboard equipment to minimize overheating electronics and reduce the risk of failure. The vertical fins are detachable, making it much easier to transport to those out-of-the-way places for the best FPV experiences.

The Dancing Wings Hobby Fokker Eindecker III is a scale model of the famous World War 1 monoplane fighter. The kit comes almost ready to fly and is constructed in balsa for a strong, lightweight, authentic structure. A lot of scale detail is supplied including, a dummy engine, scale wheels, and a dummy machine gun, plus a full accessory kit is also supplied which includes all the necessary hardware including scale rigging to complete the kit.

The Dancing Wings Hobby Shining is a large lightweight profile-style foam kit that is quick and simple to build. It has been designed to be the perfect introduction to 3D flying and will perform extreme 3D maneuvers such as waterfalls, harriers, knife-edge loops, rolling circles, and much more.

The model is very straightforward to assemble, it is manufactured in pre-painted high-quality EPP foam sheet for the majority of the construction so the parts count is quite low, and carbon strips are supplied for strengthening. It builds up quickly into a good-looking, fun-to-fly lightweight extreme sport 3D plane that is perfect for park flying and on playing fields. This ARF model is supplied with a powerful 2216-950KV brushless motor, 30A brushless ESC, 10" propeller, and 4 x 9g servos.

The ZOHD Talon GT Rebel FPV airplane offers a revolutionary design for those enthusiasts seeking unmatched performance and versatility. The Talon GT Rebel combines state-of-the-art technology with the best of old-school practices which offers an unparalleled flying experience. This portable design is very easy to assemble, no glue is required, and the wings and tail remain detachable making it very easy to transport, even in a backpack for when trekking to those out-of-the-way places.

Se você deseja velocidade, o EFXtra está onde está, com desempenho out-of-the-box superior a 160 quilômetros por hora. Durafly manteve o espírito do EFX Racer e se concentrou em adicionar desempenho extra, como as incríveis taxas de rolagem e subida.

Se você deseja velocidade, o EFXtra está onde está, com desempenho out-of-the-box superior a 160 quilômetros por hora. Durafly manteve o espírito do EFX Racer e se concentrou em adicionar desempenho extra, como as incríveis taxas de rolagem e subida.

The H-King Crusader 30E is based on the classic stick design. This electric RC plane can be flown by both beginners and experts. It is constructed from lightweight ply and balsa that is painted with a high contrast color scheme. The Crusader will stand out on the ground and in the air at your local hobby club.

O H-King MX2 Extreme 30E é perfeito para levar um piloto do esporte geral para acrobacias 3D com confiança. É leve, possui uma poderosa configuração de motor sem escovas e possui grandes superfícies de controle que o tornam ótimo para quedas animadas e tipos de vôo extremos e espirituosos. Coisas como pairar, cachoeiras, harriers, facas, círculos rolantes e outras acrobacias 3D extremas são muito mais fáceis ao pilotar o MX2 Extreme.

Este pequeno piloto de ótima aparência pode rastrear sua linhagem até o muito popular Urso Raro que vendemos alguns anos atrás. Este foi um parkflyer muito rápido, baseado nos Reno Racers, que foi incrivelmente divertido de pilotar, foi muito difícil e se tornou um favorito firme rapidamente.

O Tundra se estabeleceu firmemente na comunidade RC e agora se tornou o modelo de avião elétrico RC para a maioria dos pilotos RC. De pilotos intermediários ao piloto mais experiente, este avião RC fará tudo. O Tundra é um avião extremamente versátil, muito divertido de voar e altamente divertido para todos os pilotos, com seu excelente potencial acrobático, habilidade de vôo STOL e robustez geral.

Durafly Tundra V2 (PNF) - Laranja / Cinza- 1300mm (51") Modelo Esportivo com abasO Tundra se estabeleceu firmemente na comunidade RC e agora se tornou o modelo de avião elétrico RC para a maioria dos pilotos RC. De pilotos intermediários ao piloto mais experiente, este avião RC fará tudo. O Tundra é um avião extremamente versátil, muito divertido de voar e altamente divertido para todos os pilotos, com seu excelente potencial acrobático, habilidade de vôo STOL e robustez geral.

The Tundra has firmly established itself in the RC community and has now become the go-to electric RC plane for most RC pilots. From intermediate pilots to the more experienced flier this quality-built RC foam plane will do it all. The Tundra is an extremely versatile plane that is great fun to fly and is highly entertaining for all pilots with its excellent aerobatic potential, STOL flying ability, and all-round toughness.

The Tundra has had a massive cult following over the years within the RC community as it's easily one of the best flying electric RC planes on the market with an impressive flight envelope. This was followed sometime later with the launch of the Grand Tundra which encompassed all your favorite features but on a larger scale. The Grand Tundra Plus keeps 99% of the features of the original version, the one change that has been made is to the wing servo connectors, these have a new design to give a stronger and more reliable connection.

O Wargo Signature Edge 540T 3D é mais um avião incrível da série inspirado no renomado piloto 3D Michael Wargo. O Edge 540T foi projetado especificamente para vôos 3D precisos e treinamento acrobático. Michael Wargo, nosso piloto de equipe e especialista em 3D, queria uma aeronave de espuma que fosse mais rígida e mais leve do que outras espumas. Isso foi conseguido pela combinação de uma estrutura de balsa leve e rígida coberta com espuma de EPP leve e resistente a choques.

O H-King FG-1 Corsair "Lucky Gallon" é o terceiro da minissérie de H-King, os "Reno Aces", lutadores da Segunda Guerra Mundial vestidos para impressionar nas corridas aéreas. O FG-1 Corsair "Lucky Gallon" com o motor brushless 3108-1070KV incluído oferece um modelo realmente rápido direto da caixa com velocidades próximas a 160km/h ao usar o recomendado 2200mAh 4S LiPo. No entanto, se você é uma mão experiente e está procurando velocidades de mais de 100mph, existe o motor sem escova 3108-1170KV 'Pro' opcional. Isso dará ao seu Reno Ace um desempenho realmente balístico na mesma hélice, ESC e bateria 4S para aqueles que podem lidar com o torque rotacional extra no lançamento.

Esta versão do Yak-11 é o Red Reno Racer, este não é um esquema de cores em escala total, mas é vagamente baseado no Strega P-51 Reno Mustang. Como mencionado acima, por ser a versão racer é fornecido com um trem de força que foi desenvolvido para velocidade pura. Usando um pacote 6S LiPo, o motor sem escova 5052-550KV com o ESC 95A fornecido e hélice 16x6 dará ao Yak-11 uma incrível mudança de velocidade de até 125mph. Isso é rápido, e ver um modelo desse tamanho impressionante fazendo curvas rápidas do poste próximo ao solo é um espetáculo para ser visto. As acrobacias também são um sonho de se realizar com o iaque, as rolagens são muito axiais e as manobras em looping são grandes devido à abundância de potência. As únicas limitações para as acrobacias que executará são suas habilidades de vôo.

O incrível Frenzy é o polivalente perfeito. Com alcances de controle reduzidos, é um avião suave, estável e extremamente fácil de pilotar, perfeito para iniciantes ou iniciantes. Aumente esses arremessos e, com sua alta relação potência-peso em uma configuração 3S, o Frenzy faz jus ao seu nome. É capaz de uma ampla gama de manobras acrobáticas incríveis e atenderá às demandas até mesmo do piloto acrobático mais ambicioso.

Após o sucesso do EFX Racer, foi decidido produzir uma versão mini, como se costuma dizer, todas as coisas boas vêm em embalagens pequenas, assim nasceu o MFX Racer. O MFX foi concebido com os mesmos padrões de exigência que os seus irmãos maiores e continua a oferecer velocidade, força, agilidade e a estabilidade que se espera de um modelo Durafly. Para além disso, obtém a simplicidade de montagem e a qualidade que só um modelo EPO da Durafly pode oferecer.

We have all had to start learning to fly an RC model at some point, and a stable, high-wing trainer that is very forgiving is what is required. The Dancing Wings Hobby Vogee-16 Trainer is the perfect choice for the rookie pilot. It has a large, flat-bottomed wing with dihedral which enables it to fly very slowly, and it has the stability to sort itself out if you get in a muddle. The Vogee's flying characteristics are very benign, beginners tend to over-control, and the Vogee is very gentle in its handling, especially if you install one of the readily available 3-axis gyros that are available on the market these days. It also has a tricycle landing gear with a steerable nosewheel which really helps with the take-offs and landings. This version of the Vogee is supplied with a powerful 2817-900KV brushless motor, a 60A brushless ESC, an 11" prop, 2 x 37g servos, and 2 x 17g 

The Dancing Wings Hobby Stick-14T 3D aerobatic trainer is the perfect choice for intermediate and experienced RC pilots alike. It is based on the classic stick design and is quite capable of all the usual aerobatic maneuvers, plus with the right power train, it doubles up as the perfect 3D trainer. It has a very wide speed range, it is just as happy flying slowly as it is screaming about the sky. For added fun and enjoyment, the strip ailerons are split halfway making for outboard ailerons and inboard flaps. This allows for really slow or steep approach landings, and if the flaps are mixed in with your other controls it allows you to customize the handling to suit your own flying style. 

The Dancing Wings Hobby Cute Girl laser cut balsa kit captures the type of vintage model airplane that was used in the early days of RC with radio assist. It has that classic retro look, lots of wing dihedral, band on wings, a large cabin, classic shapes to the wings and empennage, and tail dragger landing gear, all the features required for a retro classic look.

The controls are just basic 3 channels, rudder, elevator, and motor control, this keeps things nice and simple. We recommend that you power the Cute Girl with a brushless motor set-up. However, a nitro or a diesel engine can be used for that even more authentic vintage look and classic soundtrack.

After the incredible success of the Tundra V1 and V2, Durafly has decided to produce yet another version with even more improvements to bring the Tundra series bang up to date. The V3 is now a pure 4S set-up so it has power in abundance to make your flying even more fun than it was before (if that is at all possible!). Other changes and improvements include daylight bright LEDs (so bright they are suitable for true dawn-to-dusk flying), a reinforced nylon prop that is more efficient, and better balanced, a return to the classic EPO foam wheels which are lighter, and stronger, pre-installed pushrods, and hex-head bolts and screws throughout. The V3 is available in the classic Tundra green and white scheme, or a red and silver color scheme Durafly has called the "Inspire". The reason is that the original Tundra was "Inspired" by the "Highlander" full-size SuperStol experimental airplane.

The ZOHD Altus FPV airplane offers cutting-edge technology for those enthusiasts seeking unmatched performance and versatility. The Altus combines state-of-the-art technology with a practical design and offers an unparalleled flying experience. This portable design is very easy to assemble, no glue is required, and the wings and tail are detachable making it very easy to transport, even in a backpack for when trekking to those out-of-the-way places.

Após o sucesso do EFX Racer, foi decidido produzir uma versão mini, como se costuma dizer, todas as coisas boas vêm em embalagens pequenas, assim nasceu o MFX Racer. O MFX foi concebido com os mesmos padrões de exigência que os seus irmãos maiores e continua a oferecer velocidade, força, agilidade e a estabilidade que se espera de um modelo Durafly. Para além disso, obtém a simplicidade de montagem e a qualidade que só um modelo EPO da Durafly pode oferecer.

Com um número mínimo de peças e de tempo de montagem, o MFX Racer é simplesmente encaixado e aparafusado em menos tempo do que é necessário para carregar uma bateria. O MFX Racer com a sua configuração de 4S é rápido, mas continua a ser excecionalmente estável e dá ao piloto aquela sensação de estar preso. No entanto, ao contrário da maioria das máquinas de velocidade, também tem um comportamento excecionalmente bom a baixa velocidade. Com o seu controlo de 4 canais, o MFX Racer é também muito acrobático, com grandes loops, rolos rápidos, knife edge, snaps, e spins, o MFX Racer pode fazer tudo e muito mais, o seu único limite é você o piloto! O MFX tem 2 opções de ponta de asa (ambas são fornecidas na caixa), uma opção standard de 815mm, ou a opção de asa cortada de 715mm. A configuração de asa standard dá uma taxa de subida muito melhor, enquanto que a configuração de asa cortada aumenta drasticamente a taxa de rolagem.

The HobbyKing™ Paramotor is extremely easy to fly due to its very gentle and stable flight characteristics yet once you are used to it, it will perform loops and rolls with ease. Due to the design, the huge high-performance 2250mm sail opens quickly for easy launching and it will retain its shape even in turbulence. The single skin durable sail is made from 100% ripstop fabric and comes pre-rigged with tough nylon chords that are ready to attach to the durable aluminum gondola.

The XFLY Swift 2100 is a versatile electric-powered glider that is quite happy flying fast and doing aerobatics or is equally at home flying slowly and just floating around. To achieve this versatility the XFLY engineers have used CFD (Computer Fluid Dynamics), which has enabled the Swift 2100 to achieve a high lift-to-drag ratio and excellent aerodynamic characteristics. The factory-installed power system includes an efficient 3136-1000KV brushless motor with 40A brushless ESC and drives a 10x6 2-blade folding propeller with metal spinner. This system can be powered by either a 3S, or a 4S LiPo battery to deliver plenty of thrust for fast climbs to soaring altitudes, aerobatics, and general sport flying.

The Dancing Wings Hobby Aion laser cut balsa kit is an easy-build electric sports glider that includes ailerons and flaps. The Aion is aimed at the modeler who wants to experience real model-making but wants something that is reasonably straightforward to build. This is achieved with the use of accurate laser-cut parts and the simple box-type fuselage which produce a strong, accurate, lightweight structure. The Aion is relatively easy to build, however, we do recommend that some experience in building a wood model airplane has been gained previously. Most of the components are constructed over the detailed, high-quality printed 1:1 building plan. This outstanding kit is supplied with a powerful 2216-920KV brushless motor, a 30A brushless ESC, an 11" folding prop with metal spinner, 6 x 9g servos, and an iron-on covering film pack

The ZOHD Drift is a super easy, hand-launch slow-fly pusher glider that has been designed specifically for FPV flying. It is extremely stable in flight, but the controls remain very responsive and accurate. Being a pusher prop design gets the prop well away from the ground, and the hands when launching, it also allows the camera an uncluttered viewing angle.

The Drift is very easy to assemble, no glue is required, and the wing and tail boom remain detachable, making for easy transportation. The Drift has a large battery bay for extended flight times, plus a nose camera bay compatible with most FPV, and AIO cameras available today. It also has a dedicated equipment bay for the flight controller, and  GPS unit, etc. The strong EPP foam airframe also benefits from a tough, specially designed H-girder spar for the wing, built-in CF inside the fuselage for enhanced strength, and CF pushrods throughout for precision control.

Este modelo esportivo / em escala do Avios KingTwin 1700 de excelente aparência e voador é baseado em um pequeno turboélice duplo e lembra muito o tipo usado pelas companhias aéreas fretadas militares ou civis em todo o mundo. O esquema de cores simplista, mas impressionante, descreve o tipo de pintura comumente usada em hélices civis.

O KingTwin 1700 está repleto de recursos interessantes, incluindo luzes LED, retrai e abas divididas. O trem de força de 2 aerostar 3748-820KV sem escovas com ESCs Aerostar 40A foi escolhido pela equipe Avios após testes cuidadosos. Esta combinação de motores, ESCs, adereços contra-rotativos e uma bateria 4S LiPo provou ser a configuração ideal para potência e duração.