Aeronave

Phoenix 2000 - Canopy

Phoenix 2000 - Spinner

Introduzindo nosso EPP 3D MX2. Com um design fantástico e layout, isso tudo EPP 3D'er irá satisfazer os pilotos 3D mais ansiosos!

É fuselagem é resistente a torções muito rígida ainda leve com cargas de espaço debaixo da escotilha superior longa para o seu rádio e sistema de energia. A asa é um caso de uma peça com construção EPP, um aerofólio simétrico muito preciso com 2 mastros adicionais para minimizar flex e torcer. As superfícies de controle são outra coisa - o elevador, leme e ailerons apresentam uma construção de 3 camadas (Epp-Depron-PPE) para fazer superfícies rígidas e NÃO à flexão à extrema joga! Snap rolls 'Snap' e resposta de controle é instantânea.

A luz - ainda rígida - fuselagem acrescenta-se a um grande voando 3D 'espumoso'. Cachoeiras, harriers, giros planos, círculos de rolamento este modelo tem a precisão para executar estas e quaisquer outros movimentos que você pode pensar!

Montagem da célula em um processo rápido de 10-15 minutos com a ajuda de um pouco de forma CA. Os layouts de rádio e do sistema de potência são muito simples, a longo escotilha superior fazendo para fácil acesso.

Este é um grande modelo para o parque de vôo em geral e 3D incondicional. Você será duramente pressionado para quebrar este modelo, vai levar duros golpes e manter apenas saltar para trás todas as vezes!


Características:
• material de EPP resistente, leve e resistente acidente
• Superfícies de controle composto EPP / depron Stiff
• Design revolucionário aumenta a integridade estrutural e a rigidez da estrutura do avião
• Leve fornece carga de asa optimal
• Excelente desempenho acrobático e manobrabilidade 3D.
• O design simples permite fácil acesso e instalação dos equipamentos
• A se destacar esquema de cores grande para orientação


especificações:
Envergadura: 955 milímetros
Comprimento: 945 milímetros
Área Wing: 15.2dm2
Peso: 550g (sem bateria)




exige:
sistema de rádio 4 canais
2217 950-1100KV Brushless outrunner
30Amp ESC
3S 11.1V 1100-1300MAH Li-Po
10x4.7 / hélice 11x4.7
4 x servos 9g

Este pequeno kit leva cerca de 4 horas para construir e irá satisfazer o jocky acelerador em todos nós!

O Flycat vem com 56 milímetros EDF e você vai precisar de um 25A ESC & 4800kv inrunner.

Este plano é extremamente rápido, (mais de 100 mph!), No entanto, ainda estável em vôo lento.

Spec.
Envergadura: 640 milímetros
Comprimento: 800 milímetros
Peso: 290 g
BESC: 25A (não incluído)
Motor: 4800kv 20-30 tamanho Inrunner (não incluído)
Lipoly: 1300mAh 11.1v 20C (não incluído)

Requeridos.
Motor & ESC
3 x Servo 9g
5 ou 10 minutos de epóxi (Araldite)
1 x Servo Y chumbo
1 x Servo Extensão chumbo
12AWG Silicon fio (20 centímetros para o motor ESC)
1300mAh 11.1v 20C bateria lipo
O seu próprio receptor e transmissor

O nosso relatório vôo.

Kit se encaixa bem, leve lixamento de bordos anterior e posterior necessárias para remover a espuma extra. Optamos por não reforçar a ala com tubulação CF, que didnt provar ser um problema, mesmo em plena velocidade alta G voltas.

Optamos por montar o BESC sendo área da bateria, caso a bateria precisava ser movido para a frente para ajustar CofG, no entanto, isso não era necessário.

EDF foi montado na vara de montagem. Vara montagem foi encurtado, com o pedaço extra usado para elevar a EDF fora a vara para limpar a mortalha EDF. 2 parafusos realizada a unidade de ventilação para o pau, uma antes e outra depois das pás do ventilador.

Primeiro voo.

Mantivemos CofG 9,5 centímetros a partir do ápice das asas ponta. O Flycat era mão lançou a 3/4 do acelerador, acelerando rapidamente. Para nossa surpresa, foi necessário nenhum corte.

O Flycat é um kit extremamente rápido para voar, e exigiu uma série de elevador em turnos. Sugerimos colocar o elevador no máximo joga. Ele precisa de quantidades enormes de elevador durante as curvas!

Em geral um excelente plano que voa sem problemas, mesmo em dias de vento.

Nós sugerimos um bom pacote de lipo, como este pequeno hotty vai mastigar através de um 1500mAh em apenas 5 minutos. Utilizou-se o pacote de 3S1P ZIPPY-R 1800mAh 22C durante cerca de 8 voos minuto. Em comparação com o pacote ZIPPY-Q, que nos levou curto em cerca de 7 minutos.

Our model captures the true spirit of the early WW1 Fokker Eindekker, It has an open framework structure built from quality balsa and hardwoods, a fiberglass cowl and plastic engine covers, a dummy rotary engine, and of course the machine gun. For ease of construction, all the parts are beautifully laser cut and are extremely accurate which will allow you to build the perfect model. To complete the contents of this superb kit are a pair of vintage aircraft wheels, pre-bent and drilled aluminum wing struts and U/C legs, carbon tube wing spars, and joiners plus a comprehensive hardware pack that includes rigging wire, nuts, and bolts, servo horns, rods, and connectors, etc.

After listening to customer feedback the Durafly team has designed this, stunningly painted, Red Edition Me-163 Komet. It is based on the plane that EK16 commander, Wolfgang Spate, flew on the first operational mission. After this flight the plane was returned to it's more traditional color scheme. As well as this stunning color the Durafly team has incorporated a wider tracked 'dolly' to improve ground handling during take-off. The Durafly Me-163 is in itself a truly a ground breaking model. Not only does this Komet feature a fully working scale 'dolly' style undercarriage, blistering performance and a high-quality finish, but it is designed out of the box to accept a model rocket engine! In its Plug and Fly (PnF) form, Durafly's 950mm (37.5") span Me-163 comes with all electronics pre-installed and ready to hook up to your choice of 6ch receiver. A minimal part count allows assembly to be completed in just a few steps. The molded EPO has a highly detailed surface finish externally, carbon reinforcement internally and features a color matched hard plastic belly skid. It also has good access to all electronics via the battery/canopy hatch, excellent cooling through out and of course a very authentic looking scheme. Quality is definitely the name of the game.

The Voltigeur is a well-known performer and we've just taken it to the next level. Flying the Voltigeur is a dream, using the recommended 3S Lipo battery for aerobatics and sports flying it handles like a trainer, docile, and extremely predictable. Everything from rolling circles, waterfalls, inverted harriers, and blenders, nothing will stop the Voltigeur.

The H-King Teksumo is a fun combat wing made from almost unbreakable EPP foam that is easy to build and will provide hours of fun! It comes in four unique colors so you and your flying buddies can have hours of fun ripping up the sky with some high adrenalin combat.

The engineers at Durafly have come out with another easy to fly hand launcher, the Durafly Brewster F2A Buffalo. Prior to World War II the US Navy was looking for a monoplane to fly off their aircraft carriers and the Buffalo was the winner. The Durafly Buffalo comes in two stylish color schemes. The easy to see US Navy pre-war colors and the more “navelised”, early WWII US Navy colors.

You’ll slice through the sky with this brilliantly colored SkySword. The streamlined looks and elegant lines show that this plane is built for speed. It comes with a 70mm 12-blade EDF fan to provide that realistic jet sound.

O Durafly EFX Racer foi projetado desde o início para oferecer a velocidade (mais de 100 milhas por hora) e força normalmente reservadas apenas para modelos de alta tecnologia, mas com o manuseio e satisfação, apenas um modelo Durafly pode oferecer.

O Durafly EFX Racer foi projetado desde o início para oferecer a velocidade (mais de 100 milhas por hora) e força normalmente reservadas apenas para modelos de alta tecnologia, mas com o manuseio e satisfação, apenas um modelo Durafly pode oferecer.

Made of tough EPO, the Phoenix V2 glider fuselage has been blow moulded with pylon formers to make it near indestructible. The Phoenix was made to last a lifetime with its smooth, rigid, yet remains light enough for the glider to perform. Assembly can be completed in under 15 minutes so you'll be flying in no time.

O Durafly SlowPoke é um modelo de espuma EPO de design clássico. Somando-se ao design de vôo fácil do SlowPoke, Durafly adicionou algumas rodas maiores para torná-lo ainda mais fácil de decolar e pousar em uma ampla variedade de campos. Um grande avião para seu primeiro taildragger de asa baixa ou para o piloto experiente e exigente que deseja um avião de excelente aparência e fácil de voar.

The Phoenix 2400 is the largest glider in the Phoenix range. It comes with an almost indestructible ABS plastic hull and strong EPO foam wings and tail section. With its smooth, stiff hull, the Phoenix is ​​durable for a lifetime and yet light enough for the glider to work without any problems. An additional canopy with camera mount is included. Once you have your camera installed, you can either enjoy FPV flying or just take pictures of your flights.

Welcome to the ultimate scale experience. The Avios Spitfire Mk5 has been built using super scale, a new modelling technique that allows for incredible detail. Featuring more artistry than the 1100mm Spitfire, the larger model has visible panel lines, exhaust, cannons, and scale split flaps with turn indicators for added realism.

The Ranger 2000 is easy to assemble and features a large wingspan which provides stability, and also allows the model to fly at slow speeds. The EPO wings are fitted with two spars for strength and each aileron is reinforced with carbon to eliminate any chance of distortion or twisting. The wings are attached to the fuselage using fast connect clips, after flying, simply squeeze the clips to release the wings.

The Phoenix V2 2000 is a quick and easy to assemble electric powered glider with flaps and large ailerons for a precise, aerobatic performance. The EPO wings are fitted with a carbon spar for strength and 2 metal spars join the wings to the fuselage. Also, each aileron is reinforced with carbon to eliminate any chance of distortion or twisting. The wings are attached to the fuselage using fast connect clips, after flying, simply squeeze the clips to release the wings.

The Phoenix 2400 is an extended wing version of the popular Phoenix 1600mm and 2000mm range of electric powered gliders. Assembly is quick and easy with no glue required, the vertical fin and horizontal stabilizer are simply screwed to the rear of the fuselage. The EPO wings are fitted with a carbon spar for strength and 2 metal spars join the wings to the fuselage. Also, each aileron is reinforced with carbon to eliminate any chance of distortion or twisting. The wings are attached to the fuselage using fast connect clips, after flying, simply squeeze the clips to release the wings.

The subject of this kit is the German liaison aircraft built during WW11, the Fieseler Fi 156 Storch. The Storch (German for "Stork") is famous for its STOL (Short Take-Off and Landing) abilities and it had an incredibly low stall speed of only 31mph. It was mainly used during WW11 for reconnaissance, spotting for the army and forward operations, and medical evacuation. Its design incorporated hinged slats along the entire length of the wings leading edge and a hinged and slotted set of control surfaces ran along each trailing edge, this was split equally to form outboard ailerons and inboard flaps. Virtually nothing about the Storch is streamlined with bits sticking out everywhere including the side windows,  this with its long undercarriage hanging down gives it a unique long-legged bird look which is why it was given the name of "Storch".

Esta versão do Yak-11 é baseada em um tamanho real que atualmente voa na Alemanha, o esquema de cores homenageia as unidades francesas que voaram para os russos na 2ª Guerra Mundial. Como mencionado acima, sendo a versão warbird é fornecido com um trem de força que foi desenvolvido para mais torque. Usando um pacote 6S LiPo, o motor brushless 5052-410KV com o ESC 95A e hélice 17x10 fornecidos ainda dará ao Yak-11 uma impressionante volta de velocidade de até 100mph, mas o desempenho vertical tem que ser visto para acreditar. Manobras de warbird em grande escala são um sonho de voar com a quantidade de torque e potência disponível, e as manobras de rolamento são muito axiais. Impressione os espectadores com flypasts lentos em forma de escala com flaps e as rodas para baixo, ou corridas de metralhamento rápidas e baixas e puxando para cima em um meio cubano oito ou uma manobra semelhante. O Yak-11 neste esquema de cores comemorativo parece fantástico de todos os ângulos ao voar ou ao sentar no chão.

The ZOHD Dart XL FPV flying wing airplane offers incredible lifting power, excellent handling, and portability, making it the ideal choice for long-range FPV flying. This "Enhanced Version" features a newly designed motor mount, a GPS bay with cover, built-in carbon fiber for strength, a new optimized airfoil, and a strengthened battery bay. The Dart XL incorporates Vortex generators and reversed wingtips for improved handling, lift efficiency, and yaw stability. It also has a computer-designed airflow pod that maximizes the cooling to all the onboard equipment to minimize overheating electronics and reduce the risk of failure. The vertical fins are detachable, making it much easier to transport to those out-of-the-way places for the best FPV experiences.

Ideal for both beginners and experienced pilots, this 1/16 scale EPP remote-control airplane delivers durability and high-performance fun. With a 695mm wingspan and lightweight design, it offers excellent stability, low stall speed, smooth gliding, and one-click aerobatics—including rolls, inverted flight, and loops! Powered by a brushless 2204 motor and 7.4V battery, it delivers up to 25 minutes of flight and supports real-time video transmission with an optional camera for immersive FPV flying.

The Dancing Wings Hobby Fokker Eindecker III is a scale model of the famous World War 1 monoplane fighter. The kit comes almost ready to fly and is constructed in balsa for a strong, lightweight, authentic structure. A lot of scale detail is supplied including, a dummy engine, scale wheels, and a dummy machine gun, plus a full accessory kit is also supplied which includes all the necessary hardware including scale rigging to complete the kit.

The Dancing Wings Hobby Shining is a large lightweight profile-style foam kit that is quick and simple to build. It has been designed to be the perfect introduction to 3D flying and will perform extreme 3D maneuvers such as waterfalls, harriers, knife-edge loops, rolling circles, and much more.

The model is very straightforward to assemble, it is manufactured in pre-painted high-quality EPP foam sheet for the majority of the construction so the parts count is quite low, and carbon strips are supplied for strengthening. It builds up quickly into a good-looking, fun-to-fly lightweight extreme sport 3D plane that is perfect for park flying and on playing fields. This ARF model is supplied with a powerful 2216-950KV brushless motor, 30A brushless ESC, 10" propeller, and 4 x 9g servos.

The ZOHD Dart 250G is the small brother to the popular Dart XL, it is the world's first high-end sub 250g FPV flying wing. With increasing regulations affecting our hobby, it offers an FPV experience without as much hassle as the bigger, heavier models. You will still need to check your country's regulations, some do require you to register a model airplane with a camera on it even when below 250g. The little Dart 250G offers incredible lifting power despite its size, excellent handling, and portability, which makes it the ideal choice for FPV flying in a small package. Features include an optimized airfoil, dedicated equipment bay for flight controller and GPS, nose camera bay, super durable Teflon-covered underbelly, protected leading edge to the wing, and so much more.

The ZOHD Dart 250G is the small brother to the popular Dart XL, it is the world's first high-end sub 250g FPV flying wing. With increasing regulations affecting our hobby, it offers an FPV experience without as much hassle as the bigger, heavier models. You will still need to check your country's regulations, some do require you to register a model airplane with a camera on it even when below 250g. The little Dart 250G offers incredible lifting power despite its size, excellent handling, and portability, which makes it the ideal choice for FPV flying in a small package. Features include an optimized airfoil, dedicated equipment bay for flight controller and GPS, nose camera bay, super durable Teflon-covered underbelly, protected leading edge to the wing, and so much more.

The ZOHD Talon GT Rebel FPV airplane offers a revolutionary design for those enthusiasts seeking unmatched performance and versatility. The Talon GT Rebel combines state-of-the-art technology with the best of old-school practices which offers an unparalleled flying experience. This portable design is very easy to assemble, no glue is required, and the wings and tail remain detachable making it very easy to transport, even in a backpack for when trekking to those out-of-the-way places.

Se você deseja velocidade, o EFXtra está onde está, com desempenho out-of-the-box superior a 160 quilômetros por hora. Durafly manteve o espírito do EFX Racer e se concentrou em adicionar desempenho extra, como as incríveis taxas de rolagem e subida.

Se você deseja velocidade, o EFXtra está onde está, com desempenho out-of-the-box superior a 160 quilômetros por hora. Durafly manteve o espírito do EFX Racer e se concentrou em adicionar desempenho extra, como as incríveis taxas de rolagem e subida.

The H-King Crusader 30E is based on the classic stick design. This electric RC plane can be flown by both beginners and experts. It is constructed from lightweight ply and balsa that is painted with a high contrast color scheme. The Crusader will stand out on the ground and in the air at your local hobby club.

O H-King MX2 Extreme 30E é perfeito para levar um piloto do esporte geral para acrobacias 3D com confiança. É leve, possui uma poderosa configuração de motor sem escovas e possui grandes superfícies de controle que o tornam ótimo para quedas animadas e tipos de vôo extremos e espirituosos. Coisas como pairar, cachoeiras, harriers, facas, círculos rolantes e outras acrobacias 3D extremas são muito mais fáceis ao pilotar o MX2 Extreme.

Este pequeno piloto de ótima aparência pode rastrear sua linhagem até o muito popular Urso Raro que vendemos alguns anos atrás. Este foi um parkflyer muito rápido, baseado nos Reno Racers, que foi incrivelmente divertido de pilotar, foi muito difícil e se tornou um favorito firme rapidamente.

O Tundra se estabeleceu firmemente na comunidade RC e agora se tornou o modelo de avião elétrico RC para a maioria dos pilotos RC. De pilotos intermediários ao piloto mais experiente, este avião RC fará tudo. O Tundra é um avião extremamente versátil, muito divertido de voar e altamente divertido para todos os pilotos, com seu excelente potencial acrobático, habilidade de vôo STOL e robustez geral.