Aeronave

Durafly® ™ Tundra - Plywood FPV Tray (Kit)

Durafly® ™ Tundra - Hélice Adaptor / Motor Shaft

Durafly® ™ Tundra - Asa Strut Set

Durafly® ™ Tundra - Controle de hardware e acessórios inc. Parafusos, ligações, parafusos, etc.

Durafly® ™ Tundra - Main Landing conjunto de engrenagens

Durafly® ™ Tundra - Decal Set

Fuselagem substituição. Vem com ímãs e acessórios de plástico, mas não inclui capuz.

Substituição ala principal vem com chifres de controle instalados.

Durafly Hyperbipe 900 milímetros - Substituição Asa Struts

Durafly® ™ DH vampiro 1100 milímetros - Substituição Retracção Set

Durafly® ™ Messerschmitt Bf.110 - Substituição Radiator Set (1pair)

Phoenix 2000 - Canopy

Phoenix 2000 - Spinner

Introduzindo nosso EPP 3D MX2. Com um design fantástico e layout, isso tudo EPP 3D'er irá satisfazer os pilotos 3D mais ansiosos!

É fuselagem é resistente a torções muito rígida ainda leve com cargas de espaço debaixo da escotilha superior longa para o seu rádio e sistema de energia. A asa é um caso de uma peça com construção EPP, um aerofólio simétrico muito preciso com 2 mastros adicionais para minimizar flex e torcer. As superfícies de controle são outra coisa - o elevador, leme e ailerons apresentam uma construção de 3 camadas (Epp-Depron-PPE) para fazer superfícies rígidas e NÃO à flexão à extrema joga! Snap rolls 'Snap' e resposta de controle é instantânea.

A luz - ainda rígida - fuselagem acrescenta-se a um grande voando 3D 'espumoso'. Cachoeiras, harriers, giros planos, círculos de rolamento este modelo tem a precisão para executar estas e quaisquer outros movimentos que você pode pensar!

Montagem da célula em um processo rápido de 10-15 minutos com a ajuda de um pouco de forma CA. Os layouts de rádio e do sistema de potência são muito simples, a longo escotilha superior fazendo para fácil acesso.

Este é um grande modelo para o parque de vôo em geral e 3D incondicional. Você será duramente pressionado para quebrar este modelo, vai levar duros golpes e manter apenas saltar para trás todas as vezes!


Características:
• material de EPP resistente, leve e resistente acidente
• Superfícies de controle composto EPP / depron Stiff
• Design revolucionário aumenta a integridade estrutural e a rigidez da estrutura do avião
• Leve fornece carga de asa optimal
• Excelente desempenho acrobático e manobrabilidade 3D.
• O design simples permite fácil acesso e instalação dos equipamentos
• A se destacar esquema de cores grande para orientação


especificações:
Envergadura: 955 milímetros
Comprimento: 945 milímetros
Área Wing: 15.2dm2
Peso: 550g (sem bateria)




exige:
sistema de rádio 4 canais
2217 950-1100KV Brushless outrunner
30Amp ESC
3S 11.1V 1100-1300MAH Li-Po
10x4.7 / hélice 11x4.7
4 x servos 9g

Our model captures the true spirit of the early WW1 Fokker Eindekker, It has an open framework structure built from quality balsa and hardwoods, a fiberglass cowl and plastic engine covers, a dummy rotary engine, and of course the machine gun. For ease of construction, all the parts are beautifully laser cut and are extremely accurate which will allow you to build the perfect model. To complete the contents of this superb kit are a pair of vintage aircraft wheels, pre-bent and drilled aluminum wing struts and U/C legs, carbon tube wing spars, and joiners plus a comprehensive hardware pack that includes rigging wire, nuts, and bolts, servo horns, rods, and connectors, etc.

After listening to customer feedback the Durafly team has designed this, stunningly painted, Red Edition Me-163 Komet. It is based on the plane that EK16 commander, Wolfgang Spate, flew on the first operational mission. After this flight the plane was returned to it's more traditional color scheme. As well as this stunning color the Durafly team has incorporated a wider tracked 'dolly' to improve ground handling during take-off. The Durafly Me-163 is in itself a truly a ground breaking model. Not only does this Komet feature a fully working scale 'dolly' style undercarriage, blistering performance and a high-quality finish, but it is designed out of the box to accept a model rocket engine! In its Plug and Fly (PnF) form, Durafly's 950mm (37.5") span Me-163 comes with all electronics pre-installed and ready to hook up to your choice of 6ch receiver. A minimal part count allows assembly to be completed in just a few steps. The molded EPO has a highly detailed surface finish externally, carbon reinforcement internally and features a color matched hard plastic belly skid. It also has good access to all electronics via the battery/canopy hatch, excellent cooling through out and of course a very authentic looking scheme. Quality is definitely the name of the game.

The Voltigeur is a well-known performer and we've just taken it to the next level. Flying the Voltigeur is a dream, using the recommended 3S Lipo battery for aerobatics and sports flying it handles like a trainer, docile, and extremely predictable. Everything from rolling circles, waterfalls, inverted harriers, and blenders, nothing will stop the Voltigeur.

The H-King Teksumo is a fun combat wing made from almost unbreakable EPP foam that is easy to build and will provide hours of fun! It comes in four unique colors so you and your flying buddies can have hours of fun ripping up the sky with some high adrenalin combat.

The engineers at Durafly have come out with another easy to fly hand launcher, the Durafly Brewster F2A Buffalo. Prior to World War II the US Navy was looking for a monoplane to fly off their aircraft carriers and the Buffalo was the winner. The Durafly Buffalo comes in two stylish color schemes. The easy to see US Navy pre-war colors and the more “navelised”, early WWII US Navy colors.

You’ll slice through the sky with this brilliantly colored SkySword. The streamlined looks and elegant lines show that this plane is built for speed. It comes with a 70mm 12-blade EDF fan to provide that realistic jet sound.

O Durafly EFX Racer foi projetado desde o início para oferecer a velocidade (mais de 100 milhas por hora) e força normalmente reservadas apenas para modelos de alta tecnologia, mas com o manuseio e satisfação, apenas um modelo Durafly pode oferecer.

O Durafly EFX Racer foi projetado desde o início para oferecer a velocidade (mais de 100 milhas por hora) e força normalmente reservadas apenas para modelos de alta tecnologia, mas com o manuseio e satisfação, apenas um modelo Durafly pode oferecer.

Made of tough EPO, the Phoenix V2 glider fuselage has been blow moulded with pylon formers to make it near indestructible. The Phoenix was made to last a lifetime with its smooth, rigid, yet remains light enough for the glider to perform. Assembly can be completed in under 15 minutes so you'll be flying in no time.

O Durafly SlowPoke é um modelo de espuma EPO de design clássico. Somando-se ao design de vôo fácil do SlowPoke, Durafly adicionou algumas rodas maiores para torná-lo ainda mais fácil de decolar e pousar em uma ampla variedade de campos. Um grande avião para seu primeiro taildragger de asa baixa ou para o piloto experiente e exigente que deseja um avião de excelente aparência e fácil de voar.

Welcome to the ultimate scale experience. The Avios Spitfire Mk5 has been built using super scale, a new modelling technique that allows for incredible detail. Featuring more artistry than the 1100mm Spitfire, the larger model has visible panel lines, exhaust, cannons, and scale split flaps with turn indicators for added realism.

The Ranger 2000 is easy to assemble and features a large wingspan which provides stability, and also allows the model to fly at slow speeds. The EPO wings are fitted with two spars for strength and each aileron is reinforced with carbon to eliminate any chance of distortion or twisting. The wings are attached to the fuselage using fast connect clips, after flying, simply squeeze the clips to release the wings.

The Phoenix V2 2000 is a quick and easy to assemble electric powered glider with flaps and large ailerons for a precise, aerobatic performance. The EPO wings are fitted with a carbon spar for strength and 2 metal spars join the wings to the fuselage. Also, each aileron is reinforced with carbon to eliminate any chance of distortion or twisting. The wings are attached to the fuselage using fast connect clips, after flying, simply squeeze the clips to release the wings.

The subject of this kit is the German liaison aircraft built during WW11, the Fieseler Fi 156 Storch. The Storch (German for "Stork") is famous for its STOL (Short Take-Off and Landing) abilities and it had an incredibly low stall speed of only 31mph. It was mainly used during WW11 for reconnaissance, spotting for the army and forward operations, and medical evacuation. Its design incorporated hinged slats along the entire length of the wings leading edge and a hinged and slotted set of control surfaces ran along each trailing edge, this was split equally to form outboard ailerons and inboard flaps. Virtually nothing about the Storch is streamlined with bits sticking out everywhere including the side windows,  this with its long undercarriage hanging down gives it a unique long-legged bird look which is why it was given the name of "Storch".

Esta versão do Yak-11 é baseada em um tamanho real que atualmente voa na Alemanha, o esquema de cores homenageia as unidades francesas que voaram para os russos na 2ª Guerra Mundial. Como mencionado acima, sendo a versão warbird é fornecido com um trem de força que foi desenvolvido para mais torque. Usando um pacote 6S LiPo, o motor brushless 5052-410KV com o ESC 95A e hélice 17x10 fornecidos ainda dará ao Yak-11 uma impressionante volta de velocidade de até 100mph, mas o desempenho vertical tem que ser visto para acreditar. Manobras de warbird em grande escala são um sonho de voar com a quantidade de torque e potência disponível, e as manobras de rolamento são muito axiais. Impressione os espectadores com flypasts lentos em forma de escala com flaps e as rodas para baixo, ou corridas de metralhamento rápidas e baixas e puxando para cima em um meio cubano oito ou uma manobra semelhante. O Yak-11 neste esquema de cores comemorativo parece fantástico de todos os ângulos ao voar ou ao sentar no chão.

The ZOHD Dart XL FPV flying wing airplane offers incredible lifting power, excellent handling, and portability, making it the ideal choice for long-range FPV flying. This "Enhanced Version" features a newly designed motor mount, a GPS bay with cover, built-in carbon fiber for strength, a new optimized airfoil, and a strengthened battery bay. The Dart XL incorporates Vortex generators and reversed wingtips for improved handling, lift efficiency, and yaw stability. It also has a computer-designed airflow pod that maximizes the cooling to all the onboard equipment to minimize overheating electronics and reduce the risk of failure. The vertical fins are detachable, making it much easier to transport to those out-of-the-way places for the best FPV experiences.

The Dancing Wings Hobby Fokker Eindecker III is a scale model of the famous World War 1 monoplane fighter. The kit comes almost ready to fly and is constructed in balsa for a strong, lightweight, authentic structure. A lot of scale detail is supplied including, a dummy engine, scale wheels, and a dummy machine gun, plus a full accessory kit is also supplied which includes all the necessary hardware including scale rigging to complete the kit.

The Dancing Wings Hobby Shining is a large lightweight profile-style foam kit that is quick and simple to build. It has been designed to be the perfect introduction to 3D flying and will perform extreme 3D maneuvers such as waterfalls, harriers, knife-edge loops, rolling circles, and much more.

The model is very straightforward to assemble, it is manufactured in pre-painted high-quality EPP foam sheet for the majority of the construction so the parts count is quite low, and carbon strips are supplied for strengthening. It builds up quickly into a good-looking, fun-to-fly lightweight extreme sport 3D plane that is perfect for park flying and on playing fields. This ARF model is supplied with a powerful 2216-950KV brushless motor, 30A brushless ESC, 10" propeller, and 4 x 9g servos.

The ZOHD Talon GT Rebel FPV airplane offers a revolutionary design for those enthusiasts seeking unmatched performance and versatility. The Talon GT Rebel combines state-of-the-art technology with the best of old-school practices which offers an unparalleled flying experience. This portable design is very easy to assemble, no glue is required, and the wings and tail remain detachable making it very easy to transport, even in a backpack for when trekking to those out-of-the-way places.

Se você deseja velocidade, o EFXtra está onde está, com desempenho out-of-the-box superior a 160 quilômetros por hora. Durafly manteve o espírito do EFX Racer e se concentrou em adicionar desempenho extra, como as incríveis taxas de rolagem e subida.

Se você deseja velocidade, o EFXtra está onde está, com desempenho out-of-the-box superior a 160 quilômetros por hora. Durafly manteve o espírito do EFX Racer e se concentrou em adicionar desempenho extra, como as incríveis taxas de rolagem e subida.