Aeronave

A replacement domed spinner with propeller hub assembly for the H-King Reno Aces Grumman F6F Hellcat "Little Nugget".

Esta versão do Yak-11 é o Red Reno Racer, este não é um esquema de cores em escala total, mas é vagamente baseado no Strega P-51 Reno Mustang. Como mencionado acima, por ser a versão racer é fornecido com um trem de força que foi desenvolvido para velocidade pura. Usando um pacote 6S LiPo, o motor sem escova 5052-550KV com o ESC 95A fornecido e hélice 16x6 dará ao Yak-11 uma incrível mudança de velocidade de até 125mph. Isso é rápido, e ver um modelo desse tamanho impressionante fazendo curvas rápidas do poste próximo ao solo é um espetáculo para ser visto. As acrobacias também são um sonho de se realizar com o iaque, as rolagens são muito axiais e as manobras em looping são grandes devido à abundância de potência. As únicas limitações para as acrobacias que executará são suas habilidades de vôo.

A replacement pair of main servoless retracts for the Durafly T-28 Trojan Naval edition. These are not supplied with the oleo legs but they will fit other versions of the Durafly Trojan 1100mm series.

A replacement nosewheel servoless retract for the Durafly T-28 Trojan Naval edition. This is supplied with the wire nose leg and steering arm and will fit other versions of the Durafly Trojan 1100mm series.

A replacement fuselage for the AVIOS Albatross V2, includes factory-applied decals, and water rudder.

Note: This is suitable for the Albatross V1, but of course, the colors will be different.

A replacement center wing section for the AVIOS Albatross V2, includes the 2 flaps.

Note: This is suitable for the Albatross V1, but of course, the colors will be different.

A replacement left-hand outer wing section for the AVIOS Albatross V2, includes decals, aileron, and aileron horn.

Note: This is suitable for the Albatross V1, but of course, the colors will be different.

A replacement right-hand outer wing section for the AVIOS Albatross V2, includes decals, aileron, and aileron horn.

Note: This is suitable for the Albatross V1, but of course, the colors will be different.

A replacement tail set for the AVIOS Albatross V2. This set includes the vertical and horizontal stabilizers, control horns, rudder, rudder servo with pushrod, and decals.

Note: This is suitable for the Albatross V1, but of course, the colors will be different.

A replacement canopy/cockpit hatch for the AVIOS Albatross V2, includes the clear window glazing.

Note: This is suitable for the Albatross V1, but of course, the colors will be different.

A replacement pair of engine/motor cowls for the AVIOS Albatross V2.

Note: These are suitable for the Albatross V1, but of course, the colors will be different.

A replacement pair of wing floats for the AVIOS Albatross V2.

Note: These are also suitable for the Albatross V1, but of course the colors are different.

A replacement clear water rudder with spring for the AVIOS Albatross V2.

Note: This is suitable for the Albatross V1 as well.

A replacement nose cone for the AVIOS Albatross V2.

Note: This is also suitable for the Albatross V1.

A replacement set of decals for the AVIOS Albatross V2 US Coast Guard Flying Boat. 

A replacement fuselage with decals and canopy for the US Coast Guard version of the Avios C-130 V2. This spare part is suitable for the original versions of the Avios C-130, but of course, the color scheme is quite different.

A replacement wing set with flaps, ailerons, and decals for the US Coast Guard version of the Avios C-130 V2. This spare part is suitable for the original versions of the Avios C-130, but of course, the color scheme is quite different.

A replacement engine nacelle and cowl for the US Coast Guard version of the Avios C-130 V2. This spare part is suitable for the original versions of the Avios C-130, but of course, the color scheme is quite different.

A replacement horizontal and vertical stabilizer set with elevators, rudder, and factory-applied decals for the US Coast Guard version of the Avios C-130 V2. Please note that this spare part is not suitable for the original versions of the C-130.

A replacement horizontal and vertical stabilizer set with elevators, rudder, and factory-applied decals for the Civilian Cargo version of the Avios C-130 V2.  Please note that this spare part is not suitable for the original versions of the C-130.

A replacement set of landing gear doors for the Civilian Cargo version of the Avios C-130 V2. This spare part is suitable for the original versions of the Avios C-130, but of course, the color scheme is quite different.

A replacement 6.5x5 4 blade standard pitch propeller with backplate and screw for both versions of the Avios C-130 V2, is also suitable for the version 1 of the C-130.

A replacement 6.5x5 4 blade reverse pitch propeller with backplate and screw for both versions of the Avios C-130 V2, is also suitable for the version 1 of the C-130.

A complete replacement nose landing gear set which includes servoless retract unit, gear doors, actuators, wiring, and housing for the US Coast Guard version of the Avios C-130 V2. This spare part is suitable for the original versions of the Avios C-130, but of course, the color scheme is quite different.

A replacement main landing gear set which includes servoless retract unit, actuating rods, wheels struts, and axles for the US Coast Guard version of the Avios C-130 V2. This spare part is suitable for the original versions of the Avios C-130, but of course, the color scheme is quite different.

A complete replacement set of decals for the Civilian Cargo version of the Avios C-130 V2.

A complete replacement set of decals for the US Coast Guard version of the Avios C-130 V2.

A replacement 2627-1000KV brushless motor with X mount and screws for both versions of the Avios C-130 V2, also suitable for the version 1 of the C-130.

A replacement prop adapter for both versions of the Avios C-130 V2, also suitable for the version 1 of the C-130.

A replacement carbon wing joining spar for both versions of the Avios C-130 V2, also suitable for the version 1 of the C-130.

A replacement set of scale detailing parts for the AVIOS KingTwin 1700.

A replacement set of 10x6 left and right propellers for the AVIOS KingTwin.

Please note: These propellers are also suitable for the AVIOS BushMule and Albatross models.

A replacement set of main and nosewheel landing gear struts for the AVIOS KingTwin. 

Este modelo esportivo/escala Avios KingTwin 1700 voador de ótima aparência e soberbo é baseado em um pequeno turboélice duplo e lembra muito o tipo usado pelas companhias aéreas charter militares ou civis em todo o mundo. Com tantos esquemas de cores fantásticos disponíveis para este tipo de avião, a Avios decidiu produzir uma versão branca lisa. Este acabamento branco liso fornece a tela em branco perfeita para você produzir um esquema de cores completamente exclusivo e sob medida de sua escolha.

Esta versão H-King deste impressionante F-16 Fighting Falcon é fabricada em espuma EPO e tem um belo acabamento em um esquema de cores autêntico da USAF com os decalques pré-aplicados na fábrica. O H-King F-16 possui excelentes características de voo por si só, voa como se estivesse sobre trilhos, mas o giroscópio ORX de 6 eixos pré-instalado leva isso a outro nível. Pilotos de todos os níveis de experiência se beneficiarão do uso da configuração intermediária do giroscópio, isso realmente melhora a estabilidade e suaviza o vôo, especialmente em condições de vento. Para iniciantes e pilotos de baixa jornada, o sistema de estabilização de voo facilita ainda mais o voo. Ele utiliza um MCU de 32 bits para resposta de controle ultrarrápida e possui 3 configurações, giroscópio desligado, giroscópio ligado e modo de treinamento. No modo de treinamento, o giroscópio oferece total estabilidade e também limita a quantidade de rolagem e inclinação que podem ser usadas. No modo giroscópio, isso proporciona uma estabilidade um pouco menos auxiliada e não limita a rotação ou inclinação que pode ser usada, perfeita para acrobacias suaves no estilo jato. No modo giroscópio desligado, é exatamente isso, sem giroscópio.