Aeronave

This H-King version of the classic F4U Corsair warbird is manufactured in a superbly finished EPO foam in an authentic navy color scheme with the decals pre-applied. The Corsair is a very stable flyer in its own right, for most pilots, the gyro is not necessary. However, for beginners and low hours pilots, a 6 axis ORX flight stabilization system is supplied which makes it even easier to fly. The stabilization system utilizes a 32bit MCU and a 6-axis digital gyro for ultra-fast control response, it can be switched from beginner to expert mode as your experience grows.

O Tundra se estabeleceu firmemente na comunidade RC e agora se tornou o modelo de avião elétrico RC para a maioria dos pilotos RC. De pilotos intermediários ao piloto mais experiente, este avião RC fará tudo. O Tundra é um avião extremamente versátil, muito divertido de voar e altamente divertido para todos os pilotos, com seu excelente potencial acrobático, habilidade de vôo STOL e robustez geral.

Durafly Tundra V2 (PNF) - Laranja / Cinza- 1300mm (51") Modelo Esportivo com abasO Tundra se estabeleceu firmemente na comunidade RC e agora se tornou o modelo de avião elétrico RC para a maioria dos pilotos RC. De pilotos intermediários ao piloto mais experiente, este avião RC fará tudo. O Tundra é um avião extremamente versátil, muito divertido de voar e altamente divertido para todos os pilotos, com seu excelente potencial acrobático, habilidade de vôo STOL e robustez geral.

The Tundra has firmly established itself in the RC community and has now become the go-to electric RC plane for most RC pilots. From intermediate pilots to the more experienced flier this quality-built RC foam plane will do it all. The Tundra is an extremely versatile plane that is great fun to fly and is highly entertaining for all pilots with its excellent aerobatic potential, STOL flying ability, and all-round toughness.

The Tundra has had a massive cult following over the years within the RC community as it's easily one of the best flying electric RC planes on the market with an impressive flight envelope. This was followed sometime later with the launch of the Grand Tundra which encompassed all your favorite features but on a larger scale. The Grand Tundra Plus keeps 99% of the features of the original version, the one change that has been made is to the wing servo connectors, these have a new design to give a stronger and more reliable connection.

The Ranger 2000 is easy to assemble and features a large wingspan which provides stability, and also allows the model to fly at slow speeds. The EPO wings are fitted with two spars for strength and each aileron is reinforced with carbon to eliminate any chance of distortion or twisting. The wings are attached to the fuselage using fast connect clips, after flying, simply squeeze the clips to release the wings.

The Ranger 2400 is a large electric powered pusher glider that has been specifically designed for FPV flying.  The enormous fuselage has plenty of room for large capacity or twin battery packs, radio and stabilizer components, FPV equipment, and molded into the front just below the nose is a purpose-made provision for an FPV camera. Also included is the usual Volantex camera mount that can take the place of the black canopy if you wish. Assembly is quick and easy with no glue required, the vertical fin and horizontal stabilizer are simply screwed to the rear of the fuselage. The EPO wings are fitted with a carbon spar for strength and 2 robust metal spars join the wings to the fuselage. Also, each of the large ailerons is reinforced with carbon to eliminate any chance of distortion or twisting. The wings are attached to the fuselage using the popular Volantex fast connect clips, after flying, simply squeeze the clips to release the wings.

The Phoenix V2 2000 is a quick and easy to assemble electric powered glider with flaps and large ailerons for a precise, aerobatic performance. The EPO wings are fitted with a carbon spar for strength and 2 metal spars join the wings to the fuselage. Also, each aileron is reinforced with carbon to eliminate any chance of distortion or twisting. The wings are attached to the fuselage using fast connect clips, after flying, simply squeeze the clips to release the wings.

The Phoenix 2400 is an extended wing version of the popular Phoenix 1600mm and 2000mm range of electric powered gliders. Assembly is quick and easy with no glue required, the vertical fin and horizontal stabilizer are simply screwed to the rear of the fuselage. The EPO wings are fitted with a carbon spar for strength and 2 metal spars join the wings to the fuselage. Also, each aileron is reinforced with carbon to eliminate any chance of distortion or twisting. The wings are attached to the fuselage using fast connect clips, after flying, simply squeeze the clips to release the wings.

The subject of this kit is the German liaison aircraft built during WW11, the Fieseler Fi 156 Storch. The Storch (German for "Stork") is famous for its STOL (Short Take-Off and Landing) abilities and it had an incredibly low stall speed of only 31mph. It was mainly used during WW11 for reconnaissance, spotting for the army and forward operations, and medical evacuation. Its design incorporated hinged slats along the entire length of the wings leading edge and a hinged and slotted set of control surfaces ran along each trailing edge, this was split equally to form outboard ailerons and inboard flaps. Virtually nothing about the Storch is streamlined with bits sticking out everywhere including the side windows,  this with its long undercarriage hanging down gives it a unique long-legged bird look which is why it was given the name of "Storch".

Este modelo esportivo / em escala do Avios KingTwin 1700 de excelente aparência e voador é baseado em um pequeno turboélice duplo e lembra muito o tipo usado pelas companhias aéreas fretadas militares ou civis em todo o mundo. O esquema de cores simplista, mas impressionante, descreve o tipo de pintura comumente usada em hélices civis.

O KingTwin 1700 está repleto de recursos interessantes, incluindo luzes LED, retrai e abas divididas. O trem de força de 2 aerostar 3748-820KV sem escovas com ESCs Aerostar 40A foi escolhido pela equipe Avios após testes cuidadosos. Esta combinação de motores, ESCs, adereços contra-rotativos e uma bateria 4S LiPo provou ser a configuração ideal para potência e duração.

O Wargo Signature Edge 540T 3D é mais um avião incrível da série inspirado no renomado piloto 3D Michael Wargo. O Edge 540T foi projetado especificamente para vôos 3D precisos e treinamento acrobático. Michael Wargo, nosso piloto de equipe e especialista em 3D, queria uma aeronave de espuma que fosse mais rígida e mais leve do que outras espumas. Isso foi conseguido pela combinação de uma estrutura de balsa leve e rígida coberta com espuma de EPP leve e resistente a choques.

The H-King P51 "Galloping Ghost" is the first in a new mini-series from H-King, the "Reno Aces", WW2 fighters dressed to impress at the air races. The P-51 "Galloping Ghost" with the included stock 3108-1070KV brushless motor offers a really quick model straight out of the box with speeds approaching 100mph when using the recommended 2200mah 4S lipo. However, if you are an experienced hand and are looking for 100+ mph speeds then there is the optional drop-in fit 3108-1170KV 'Pro' brushless motor. This will give your great-looking Reno Ace a really ballistic performance on the same prop, ESC, and 4S battery for those that can handle the extra rotational torque on launch.

O H-King FG-1 Corsair "Lucky Gallon" é o terceiro da minissérie de H-King, os "Reno Aces", lutadores da Segunda Guerra Mundial vestidos para impressionar nas corridas aéreas. O FG-1 Corsair "Lucky Gallon" com o motor brushless 3108-1070KV incluído oferece um modelo realmente rápido direto da caixa com velocidades próximas a 160km/h ao usar o recomendado 2200mAh 4S LiPo. No entanto, se você é uma mão experiente e está procurando velocidades de mais de 100mph, existe o motor sem escova 3108-1170KV 'Pro' opcional. Isso dará ao seu Reno Ace um desempenho realmente balístico na mesma hélice, ESC e bateria 4S para aqueles que podem lidar com o torque rotacional extra no lançamento.

Esta versão do Yak-11 é o Red Reno Racer, este não é um esquema de cores em escala total, mas é vagamente baseado no Strega P-51 Reno Mustang. Como mencionado acima, por ser a versão racer é fornecido com um trem de força que foi desenvolvido para velocidade pura. Usando um pacote 6S LiPo, o motor sem escova 5052-550KV com o ESC 95A fornecido e hélice 16x6 dará ao Yak-11 uma incrível mudança de velocidade de até 125mph. Isso é rápido, e ver um modelo desse tamanho impressionante fazendo curvas rápidas do poste próximo ao solo é um espetáculo para ser visto. As acrobacias também são um sonho de se realizar com o iaque, as rolagens são muito axiais e as manobras em looping são grandes devido à abundância de potência. As únicas limitações para as acrobacias que executará são suas habilidades de vôo.

The HobbyKing™ Paramotor is extremely easy to fly due to its very gentle and stable flight characteristics yet once you are used to it, it will perform loops and rolls with ease. Due to the design, the huge high-performance 2250mm sail opens quickly for easy launching and it will retain its shape even in turbulence. The single skin durable sail is made from 100% ripstop fabric and comes pre-rigged with tough nylon chords that are ready to attach to the durable aluminum gondola.

Esta versão do Yak-11 é baseada em um tamanho real que atualmente voa na Alemanha, o esquema de cores homenageia as unidades francesas que voaram para os russos na 2ª Guerra Mundial. Como mencionado acima, sendo a versão warbird é fornecido com um trem de força que foi desenvolvido para mais torque. Usando um pacote 6S LiPo, o motor brushless 5052-410KV com o ESC 95A e hélice 17x10 fornecidos ainda dará ao Yak-11 uma impressionante volta de velocidade de até 100mph, mas o desempenho vertical tem que ser visto para acreditar. Manobras de warbird em grande escala são um sonho de voar com a quantidade de torque e potência disponível, e as manobras de rolamento são muito axiais. Impressione os espectadores com flypasts lentos em forma de escala com flaps e as rodas para baixo, ou corridas de metralhamento rápidas e baixas e puxando para cima em um meio cubano oito ou uma manobra semelhante. O Yak-11 neste esquema de cores comemorativo parece fantástico de todos os ângulos ao voar ou ao sentar no chão.

The Hobbyking H-King Mini L-39 has been developed from an earlier version that had a 50mm fan unit. This latest rendition from RC L39 aircraft sports an uprated 64mm 8-blade EDF fan unit with a 2220-3300KV brushless outrunner motor, a 50A ESC, and uses a 4S LiPo battery instead of the original 3S setup. The full-size L-39 jet was designed in the Czech Republic as a high-performance jet trainer for performing basic to advanced pilot training. It was the first trainer aircraft in the world to be equipped with a turbofan.

Este modelo esportivo/escala Avios KingTwin 1700 voador de ótima aparência e soberbo é baseado em um pequeno turboélice duplo e lembra muito o tipo usado pelas companhias aéreas charter militares ou civis em todo o mundo. Com tantos esquemas de cores fantásticos disponíveis para este tipo de avião, a Avios decidiu produzir uma versão branca lisa. Este acabamento branco liso fornece a tela em branco perfeita para você produzir um esquema de cores completamente exclusivo e sob medida de sua escolha.

Esta versão H-King deste impressionante F-16 Fighting Falcon é fabricada em espuma EPO e tem um belo acabamento em um esquema de cores autêntico da USAF com os decalques pré-aplicados na fábrica. O H-King F-16 possui excelentes características de voo por si só, voa como se estivesse sobre trilhos, mas o giroscópio ORX de 6 eixos pré-instalado leva isso a outro nível. Pilotos de todos os níveis de experiência se beneficiarão do uso da configuração intermediária do giroscópio, isso realmente melhora a estabilidade e suaviza o vôo, especialmente em condições de vento. Para iniciantes e pilotos de baixa jornada, o sistema de estabilização de voo facilita ainda mais o voo. Ele utiliza um MCU de 32 bits para resposta de controle ultrarrápida e possui 3 configurações, giroscópio desligado, giroscópio ligado e modo de treinamento. No modo de treinamento, o giroscópio oferece total estabilidade e também limita a quantidade de rolagem e inclinação que podem ser usadas. No modo giroscópio, isso proporciona uma estabilidade um pouco menos auxiliada e não limita a rotação ou inclinação que pode ser usada, perfeita para acrobacias suaves no estilo jato. No modo giroscópio desligado, é exatamente isso, sem giroscópio.

O incrível Frenzy é o polivalente perfeito. Com alcances de controle reduzidos, é um avião suave, estável e extremamente fácil de pilotar, perfeito para iniciantes ou iniciantes. Aumente esses arremessos e, com sua alta relação potência-peso em uma configuração 3S, o Frenzy faz jus ao seu nome. É capaz de uma ampla gama de manobras acrobáticas incríveis e atenderá às demandas até mesmo do piloto acrobático mais ambicioso.

Após o sucesso do EFX Racer, foi decidido produzir uma versão mini, como se costuma dizer, todas as coisas boas vêm em embalagens pequenas, assim nasceu o MFX Racer. O MFX foi concebido com os mesmos padrões de exigência que os seus irmãos maiores e continua a oferecer velocidade, força, agilidade e a estabilidade que se espera de um modelo Durafly. Para além disso, obtém a simplicidade de montagem e a qualidade que só um modelo EPO da Durafly pode oferecer.

This beautiful model of a North American T-28 Trojan USAF Military Trainer with brushed 1020 motor, and 3D/6G gyro stabilization system not only looks great, but it flies great as well. The built-in switchable 6-axis gyro flight stabilization system makes it perfect for both beginners and experts alike. It is tough too, it's constructed from durable, crash-resistant EPP foam which is light, extremely strong, and ready to take all the knocks and bangs associated with learning to fly.

This beautiful model of a Grumman F8F Rare Bear Reno Racer with brushed 1020 motor, and 3D/6G gyro stabilization system not only looks great, but it flies great as well. The built-in switchable 6-axis gyro flight stabilization system makes it perfect for both beginners and experts alike. It is tough too, it's constructed from durable, crash-resistant EPP foam which is light, extremely strong, and ready to take all the knocks and bangs associated with learning to fly.

This fantastic looking XFly 80mm EDF jet is a detailed scale model of the French Air Force Alpha Jet, it is packed full of scale details including molded-in panel lines, a simulated antenna, a crystal clear canopy with cockpit detail, removable gun pod, and much more. Scale features include servoless retracts with CNC machined scale, sprung oleos and sequenced gear doors, functional LED nav and landing lights, operational flaps, and full-flying horizontal stabs. Take your scale flying experience to another level with this impressive 6S-powered XFLY Alpha Jet in a French Air Force color scheme.

This fantastic-looking XFly 80mm EDF jet is a detailed scale model of the Dassault/Dornier Alpha Jet, this version is in the color scheme of the famous Patrouille de France aerobatic team. It is packed full of scale details including molded-in panel lines, a simulated antenna, a crystal clear canopy with cockpit detail, and much more. Scale features include servoless retracts with CNC machined scale, sprung oleos and sequenced gear doors, functional LED nav and landing lights, operational flaps, and full-flying horizontal stabs. Take your scale flying experience to another level with this impressive 6S-powered XFLY Alpha Jet in the classic Patrouille de France color scheme.

The XFLY Sukhoi Su-27 Flanker 750mm EDF jet is an easy-to-fly, great-looking, and versatile scale EDF model that will appeal to a wide variety of pilots, including those with limited experience in flying EDF jets. The 4S-compatible power system includes twin 12-bladed 50mm fan units that deliver an abundance of power for excellent thrust, loads of speed, and an incredible turbine-like sound. The full-size Sukhoi Su-27 Flanker is a long-range air defense jet fighter that was designed as a direct competitor to the McDonnell Douglas F-14. The swept-back wing configuration gives the Su-27 excellent slow-speed handling and short-field capabilities, but it also allows for high maneuverability at speed. These design attributes carry over extremely well to the XFLY model of the Sukhoi Su-27.

The XFLY Sukhoi Su-27 Flanker 750mm EDF jet is an easy-to-fly, great-looking, and versatile scale EDF model that will appeal to a wide variety of pilots, including those with limited experience in flying EDF jets. The 4S-compatible power system includes twin 12-bladed 50mm fan units that deliver an abundance of power for excellent thrust, loads of speed, and an incredible turbine-like sound. The full-size Sukhoi Su-27 Flanker is a long-range air defense jet fighter that was designed as a direct competitor to the McDonnell Douglas F-14. The swept-back wing configuration gives the Su-27 excellent slow-speed handling and short-field capabilities, but it also allows for high maneuverability at speed. These design attributes carry over extremely well to the XFLY model of the Sukhoi Su-27.

This fantastic-looking XFly 80mm EDF jet is a detailed scale model of a US Airforce T-7A Red Hawk advanced trainer. It is packed full of scale details including molded-in panel lines, simulated antenna, pitot tube, a crystal clear canopy with cockpit detail, missiles, drop tanks, and much more. Scale features include servoless retracts with CNC machined scale, sprung oleos and sequenced gear doors, functional LED nav and landing lights, full-flying horizontal stabs, and operational flaps.

The XFLY Swift 2100 is a versatile electric-powered glider that is quite happy flying fast and doing aerobatics or is equally at home flying slowly and just floating around. To achieve this versatility the XFLY engineers have used CFD (Computer Fluid Dynamics), which has enabled the Swift 2100 to achieve a high lift-to-drag ratio and excellent aerodynamic characteristics. The factory-installed power system includes an efficient 3136-1000KV brushless motor with 40A brushless ESC and drives a 10x6 2-blade folding propeller with metal spinner. This system can be powered by either a 3S, or a 4S LiPo battery to deliver plenty of thrust for fast climbs to soaring altitudes, aerobatics, and general sport flying.

The XFLY Partenavia P68 is a small, semi-scale twin-engined model that is perfect for flying in small areas such as local parks, sports fields, etc. It has been designed to be extremely easy to fly and assemble, which makes it perfect as an entry-level choice for the novice pilot. The design is based on the full-size Partenavia P68 which is a 6-seater, twin-engined high-wing monoplane that is generally used for light transport and training.

The XFLY Eagle Twin is an innovative racing model with twin EDF motors on each wing tip, this is a radical configuration and allows for a large area in the middle of the fuselage for batteries, and other equipment. The included power system gives a power-to-weight ratio of over 1:15 which allows for easy hand-launching and an incredible performance. Top speeds of over 110mph are achievable and a special EDF mixing configuration makes the Eagle capable of performing differential maneuvers including flat spins, inverted flat spins, and other challenging aerobatic maneuvers.

The XFLY Eagle Twin is an innovative racing model with twin EDF motors on each wing tip, this is a radical configuration and allows for a large area in the middle of the fuselage for batteries, and other equipment. The included power system gives a power-to-weight ratio of over 1:15 which allows for easy hand-launching and an incredible performance. Top speeds of over 110mph are achievable and a special EDF mixing configuration makes the Eagle capable of performing differential maneuvers including flat spins, inverted flat spins, and other challenging aerobatic maneuvers.

The Dancing Wings Hobby Fokker Eindecker III is a scale model of the famous World War 1 monoplane fighter. The kit comes almost ready to fly and is constructed in balsa for a strong, lightweight, authentic structure. A lot of scale detail is supplied including, a dummy engine, scale wheels, and a dummy machine gun, plus a full accessory kit is also supplied which includes all the necessary hardware including scale rigging to complete the kit.

The Dancing Wings Hobby S.E.5A is a detailed scale model of the famous World War 1 biplane fighter. The kit comes almost ready to fly and is constructed in balsa for a strong, lightweight, authentic structure. A lot of scale detail is supplied including, scale exhausts, scale wheels, and a dummy machine gun, plus a full accessory kit is also supplied which includes all the necessary hardware including scale rigging to complete the kit.