Aeronave

Esta versão do Yak-11 é o Red Reno Racer, este não é um esquema de cores em escala total, mas é vagamente baseado no Strega P-51 Reno Mustang. Como mencionado acima, por ser a versão racer é fornecido com um trem de força que foi desenvolvido para velocidade pura. Usando um pacote 6S LiPo, o motor sem escova 5052-550KV com o ESC 95A fornecido e hélice 16x6 dará ao Yak-11 uma incrível mudança de velocidade de até 125mph. Isso é rápido, e ver um modelo desse tamanho impressionante fazendo curvas rápidas do poste próximo ao solo é um espetáculo para ser visto. As acrobacias também são um sonho de se realizar com o iaque, as rolagens são muito axiais e as manobras em looping são grandes devido à abundância de potência. As únicas limitações para as acrobacias que executará são suas habilidades de vôo.

The HobbyKing™ Paramotor is extremely easy to fly due to its very gentle and stable flight characteristics yet once you are used to it, it will perform loops and rolls with ease. Due to the design, the huge high-performance 2250mm sail opens quickly for easy launching and it will retain its shape even in turbulence. The single skin durable sail is made from 100% ripstop fabric and comes pre-rigged with tough nylon chords that are ready to attach to the durable aluminum gondola.

Esta versão do Yak-11 é baseada em um tamanho real que atualmente voa na Alemanha, o esquema de cores homenageia as unidades francesas que voaram para os russos na 2ª Guerra Mundial. Como mencionado acima, sendo a versão warbird é fornecido com um trem de força que foi desenvolvido para mais torque. Usando um pacote 6S LiPo, o motor brushless 5052-410KV com o ESC 95A e hélice 17x10 fornecidos ainda dará ao Yak-11 uma impressionante volta de velocidade de até 100mph, mas o desempenho vertical tem que ser visto para acreditar. Manobras de warbird em grande escala são um sonho de voar com a quantidade de torque e potência disponível, e as manobras de rolamento são muito axiais. Impressione os espectadores com flypasts lentos em forma de escala com flaps e as rodas para baixo, ou corridas de metralhamento rápidas e baixas e puxando para cima em um meio cubano oito ou uma manobra semelhante. O Yak-11 neste esquema de cores comemorativo parece fantástico de todos os ângulos ao voar ou ao sentar no chão.

Este modelo esportivo/escala Avios KingTwin 1700 voador de ótima aparência e soberbo é baseado em um pequeno turboélice duplo e lembra muito o tipo usado pelas companhias aéreas charter militares ou civis em todo o mundo. Com tantos esquemas de cores fantásticos disponíveis para este tipo de avião, a Avios decidiu produzir uma versão branca lisa. Este acabamento branco liso fornece a tela em branco perfeita para você produzir um esquema de cores completamente exclusivo e sob medida de sua escolha.

O incrível Frenzy é o polivalente perfeito. Com alcances de controle reduzidos, é um avião suave, estável e extremamente fácil de pilotar, perfeito para iniciantes ou iniciantes. Aumente esses arremessos e, com sua alta relação potência-peso em uma configuração 3S, o Frenzy faz jus ao seu nome. É capaz de uma ampla gama de manobras acrobáticas incríveis e atenderá às demandas até mesmo do piloto acrobático mais ambicioso.

The XFLY Swift 2100 is a versatile electric-powered glider that is quite happy flying fast and doing aerobatics or is equally at home flying slowly and just floating around. To achieve this versatility the XFLY engineers have used CFD (Computer Fluid Dynamics), which has enabled the Swift 2100 to achieve a high lift-to-drag ratio and excellent aerodynamic characteristics. The factory-installed power system includes an efficient 3136-1000KV brushless motor with 40A brushless ESC and drives a 10x6 2-blade folding propeller with metal spinner. This system can be powered by either a 3S, or a 4S LiPo battery to deliver plenty of thrust for fast climbs to soaring altitudes, aerobatics, and general sport flying.

The Dancing Wings Hobby Fokker Eindecker III is a scale model of the famous World War 1 monoplane fighter. The kit comes almost ready to fly and is constructed in balsa for a strong, lightweight, authentic structure. A lot of scale detail is supplied including, a dummy engine, scale wheels, and a dummy machine gun, plus a full accessory kit is also supplied which includes all the necessary hardware including scale rigging to complete the kit.

The Dancing Wings Hobby S.E.5A is a detailed scale model of the famous World War 1 biplane fighter. The kit comes almost ready to fly and is constructed in balsa for a strong, lightweight, authentic structure. A lot of scale detail is supplied including, scale exhausts, scale wheels, and a dummy machine gun, plus a full accessory kit is also supplied which includes all the necessary hardware including scale rigging to complete the kit.

We have all had to start learning to fly an RC model at some point, and a stable, high-wing trainer that is very forgiving is what is required. The Dancing Wings Hobby Vogee-16 Trainer is the perfect choice for the rookie pilot. It has a large, flat-bottomed wing with dihedral which enables it to fly very slowly, and it has the stability to sort itself out if you get in a muddle. The Vogee's flying characteristics are very benign, beginners tend to over-control, and the Vogee is very gentle in its handling, especially if you install one of the readily available 3-axis gyros that are available on the market these days. It also has a tricycle landing gear with a steerable nosewheel which really helps with the take-offs and landings. This version of the Vogee is supplied with a powerful 2817-900KV brushless motor, a 60A brushless ESC, an 11" prop, 2 x 37g servos, and 2 x 17g 

The Dancing Wings Hobby Stick-14T 3D aerobatic trainer is the perfect choice for intermediate and experienced RC pilots alike. It is based on the classic stick design and is quite capable of all the usual aerobatic maneuvers, plus with the right power train, it doubles up as the perfect 3D trainer. It has a very wide speed range, it is just as happy flying slowly as it is screaming about the sky. For added fun and enjoyment, the strip ailerons are split halfway making for outboard ailerons and inboard flaps. This allows for really slow or steep approach landings, and if the flaps are mixed in with your other controls it allows you to customize the handling to suit your own flying style. 

The Dancing Wings Hobby Cute Girl laser cut balsa kit captures the type of vintage model airplane that was used in the early days of RC with radio assist. It has that classic retro look, lots of wing dihedral, band on wings, a large cabin, classic shapes to the wings and empennage, and tail dragger landing gear, all the features required for a retro classic look.

The controls are just basic 3 channels, rudder, elevator, and motor control, this keeps things nice and simple. We recommend that you power the Cute Girl with a brushless motor set-up. However, a nitro or a diesel engine can be used for that even more authentic vintage look and classic soundtrack.

After the incredible success of the Tundra V1 and V2, Durafly has decided to produce yet another version with even more improvements to bring the Tundra series bang up to date. The V3 is now a pure 4S set-up so it has power in abundance to make your flying even more fun than it was before (if that is at all possible!). Other changes and improvements include daylight bright LEDs (so bright they are suitable for true dawn-to-dusk flying), a reinforced nylon prop that is more efficient, and better balanced, a return to the classic EPO foam wheels which are lighter, and stronger, pre-installed pushrods, and hex-head bolts and screws throughout. The V3 is available in the classic Tundra green and white scheme, or a red and silver color scheme Durafly has called the "Inspire". The reason is that the original Tundra was "Inspired" by the "Highlander" full-size SuperStol experimental airplane.

Avios continues to bring you great flying, and high-quality RC models of interesting subjects, this theme continues with the Avios Twin Otter STOL (Short Takeoff and Landing) twin-engine plane. The Avios model captures the looks and great flying characteristics of the full-size inspired Twin Otter. The impressive power-to-weight ratio and light wing loading makes for exceptional low-speed handling and STOL flight characteristics.

The Avios Twin Otter is also crammed full of outstanding features, these include a set of large barn door style flaps, counter-rotating props for improved handling, scale outline with detailed surface finish, and scale plastic parts. Other features include a fully sprung, all metal CNC nose strut with servo saver, low bounce soft foam oversized bush wheels, and day bright LED lights throughout.

The list of outstanding features goes on with a set of floats included, these are easily fitted in place of the tricycle landing gear so that you can have even more fun flying from lakes and rivers. The included Aerostar RVS speed controllers make flying from water on the floats so much easier, they allow you to maneuver and taxi even in the more challenging conditions and situations that can be found on inland waters. To further help when flying with the floats fitted are a pair of optional tail fins, these increase the yaw stability caused by the extra drag of the floats. Avios have also included two magnetically held interchangeable nose sections, one short to emulate the "Series 100" Twin Otter, and one long so that you can quickly change the look of your Twin Otter to a "Series 200".