Werkbank

Nylon T-Connector Male (10pcs).

XT60 Male w/12AWG 100mm Silicone Wire (5pcs).

The SKYRC BD250 is a powerful discharging unit that allows the user to discharge a battery pack at up to 35 amps or 250 watts, it also measures and compares their performance. The BD250 has the ability to discharge, test, and analyze virtually any type and size of battery, regardless of chemistry and the number of cells up to a voltage of 35V.

A replacement pair of spinners and backplates for the AVIOS KingTwin 1700.

A complete set of replacement servoless retracts with dummy oleos and wheels for the AVIOS KingTwin 1700.

2 position single pole latching panel mounted toggle switch that is perfect for on/off switching. Suitable for a voltage of 125~250V AC and up to a current of 5amps.

A replacement spinner with backplate for the H-King MX2 Extreme 30E.

A replacement carbon landing gear for the H-King MX2 Extreme 30E.

A replacement 13x4 composite propeller for the H-King MX2 Extreme 30E.

These Team Turnigy X-Large propellor protectors are ideal for protecting wood and carbon props during transportation and storage. They have a tough exterior with a non-scratch lining and hook and loop retaining straps.

These Team Turnigy large propellor protectors are ideal for protecting wood and carbon props during transportation and storage. They have a tough exterior with a non-scratch lining and hook and loop retaining straps.

A replacement 12x6 propeller for the H-King Swiss J-3 Piper Cub.

Please note: These parts will fit previous versions of the H-King 1400mm J-3 Cub, the colors where applicable will of course be different.

A replacement domed spinner with propeller hub assembly for the H-King Reno Aces Grumman F6F Hellcat "Little Nugget".

A replacement 8x6 propeller for the H-King Reno Aces P-51 "Galloping Ghost".

This next-generation bidirectional cross weave glass fiber reinforcing tape has a transparent "PET" substrate which provides a high longitudinal tensile strength, and is transverse tear resistance, in short, it is extremely strong. The other outstanding property it has is the adhesive, it is super sticky, but allows for positioning. Once you are satisfied with the position of the tape gently apply more pressure and the strength of the bond increases. This strong, pressure-sensitive rubber-based adhesive will also increase its strength over the next 24hrs as it "cures" to form a permanent, very strong bond. Another characteristic of this tape is that it will retain its strength in high and low temperatures.

These 3 bladed propellers are a direct replacement for the AVIOS Albatross and AVIOS BushMule airplanes.

A replacement servoless retract unit (1pc) for the H-King Yak-11 Red Reno Racer/Commemorative Russian WW2 Warbird.

This is a replacement spinner for the H-King Yak-11 Red Reno Racer.

Een hoogwaardige dubbelzijdige tape die perfect is voor het bevestigen van servo's, ontvangers en vele andere items in uw modellen. Het is gemaakt van schokabsorberend polyethyleenschuim met aan beide zijden een sterke acrylkleefstof, dit PE-schuim is perfect voor het isoleren van gevoelige elektronische componenten tegen trillingen. Andere kenmerken van de tape zijn dat deze waterafstotend, temperatuurbestendig en UV-bestendig is.

A replacement pair of main servoless retracts for the Durafly T-28 Trojan Naval edition. These are not supplied with the oleo legs but they will fit other versions of the Durafly Trojan 1100mm series.

A replacement nosewheel servoless retract for the Durafly T-28 Trojan Naval edition. This is supplied with the wire nose leg and steering arm and will fit other versions of the Durafly Trojan 1100mm series.

A replacement 10x6 propeller for the Durafly Prime Tundra PT1200 STOL Trainer-Sports Model.

A complete set of floats including a water rudder for the Durafly Prime Tundra PT1200 STOL Trainer-Sports Model. Take your flying to the next level and have loads of fun flying from your favorite lake or waterway. This set includes everything that is necessary to convert your Prime Tundra to a floatplane.

Features:
• The perfect addition for your Prime Tundra
• Made of tough EPO foam
• Includes a water rudder for improved steering whilst taxying
• Includes mounting hardware and decal set
• Very quick and easy to fit

Included:
1 x Pair of EPO floats
1 x Front mounting strut
1 x Rear mounting strut
2 x Cross braces
1 x Water rudder
1 x Decal set

A complete replacement set of LED lights with wiring and connectors for the Durafly Night Tundra STOL/Sports model. Also could be used on your existing Tundra or other models of a similar size.

A replacement 6.5x5 4 blade standard pitch propeller with backplate and screw for both versions of the Avios C-130 V2, is also suitable for the version 1 of the C-130.

A replacement 6.5x5 4 blade reverse pitch propeller with backplate and screw for both versions of the Avios C-130 V2, is also suitable for the version 1 of the C-130.

A replacement prop adapter for the H-King Reno Aces P-51 "Galloping Ghost".

A replacement set of 10x6 left and right propellers for the AVIOS KingTwin.

Please note: These propellers are also suitable for the AVIOS BushMule and Albatross models.

A replacement set of main and nosewheel landing gear struts for the AVIOS KingTwin. 

A replacement 4S 50mm 12 blade ducted fan unit with brushless motor for the H-King F-16 Fighting Falcon 550mm.

A replacement 4S 50mm 12 blade ducted fan unit with brushless motor for the H-King F-18 Super Hornet 588mm.

An upgraded nosewheel landing gear retract set for the Avios KingTwin Sport/Scale Turboprop. This upgraded assembly has been manufactured with a different composition for the plastic parts which is harder. Also, the pushrod linkage has been made of thicker, stronger steel for more durability.

De ToolkitRC MC8 Advanced Multifunction Battery Checker zit boordevol functies en heeft een groot kleurenscherm voor de volledige batterijstatus in één oogopslag. Deze multifunctionele checker kan de status controleren van 1-cels tot 8-cells accupacks, heeft one-touch batterijbalancering en kan uitgangssignalen lezen voor PWM, PPM of SBUS, als een ontvanger-checker. De PWM-uitgang kan ook worden gebruikt als servotester en de MC8 kan zelfs uw mobiele apparaten snel opladen via de USB-C 20W-uitgang.

Hatch 30x16mm (5 stuks)

CA Scharnier L25 * W20 * H0.3 (10st)