Radio-accessoires

De perfecte optie voor uw kostbare R / C zender transport / opslag!

De Turnigy Transmitter Bag is voorzien van lichtgewicht constructie, maar is stevig genoeg om uw radio te beschermen tijdens normaal transport. Het heeft een dubbele ritssluiting, een verwijderbare draagriem en zakken in een breed scala aan accessoires accommdate zoals spare TX batterij, oplader, nekkoord en nog veel meer!

Twee zelfklevende schuimblokken staan ​​op de binnenkant voor accommdating uw specifieke zender vorm. Ze beschikken over een klittenband steun zodat ze kunnen worden verplaatst naar welke positie u heel snel en gemakkelijk nodig. Er is zelfs een klittenband band geïntegreerd in de zak om uw zender te garanderen blijft zitten.

specs:
Inner Afmetingen: 290x190x100mm
Gewicht: 450 g

Aluminiumlegering nek gordelverstelling geschikt voor DJI zenders of iets dergelijks.

Futaba Trainer Cable (Buddy Box Cable) 2.8m

Deze set kan gebruikt worden met je eigen compatibele zender als vervanging voor een verloren of beschadigde USB simulator kabel. Inclusief adapters voor Esky, JR / Spektrum en Futaba.

Compatibel met XTR, AeroFly en FMS
Inclusief driver software.

De FrSky S.BUS PWM Decoder kunt u een standaard analoge of digitale servo's met je S.BUS compatibele ontvanger te gebruiken. Dit elimineert de noodzaak voor het gebruik van dure S.BUS specifieke servo's zodat u uw modellen bestaande servo's gebruiken.

Met 4 programmeerbare kanaal uitgangen, kunt u onafhankelijk van elkaar elke servo toewijzen aan een kanaal van uw keuze, terwijl slechts met één ingang lood aansluiten van uw ontvanger. Dit maakt uw bedrading veel meer netjes en zorgt voor eenvoudige instelling van uw servo's zonder de noodzaak voor het uitvoeren van meerdere verlengsnoeren.

Dit is een geweldig apparaat om te gebruiken in combinatie met onze Oranje 7CH en 9CH S.BUS compatibele ontvangers!

inclusief:
FrSky S.BUS PWM Decoder

specs:
Kanaal Uitgangen: 4 programmeerbare
Channel Ouput Lead Lengte: 200mm
Totale lengte: 350mm

* Opmerking: FrSky Servo Channel Changer vereist (afzonderlijk verkrijgbaar, zie gerelateerde items hieronder) tot toewijzing van kanaal uitgangen te wijzigen.

De FrSky S.Port naar UART Converter ondersteunt een link met externe analoge apparaten via twee ADC-poorten voor seriële poort Data-transmissie op S.Port BUS en analoge signaal AD ingang via S.Port.

Het pakket bevat module A en B, samen met 2 x man op man startkabels.

specs:
Mode: SP2UART
Bedrijfsspanning: DC 4 -10 V
Gewicht: 3g
Afmetingen: 44 x 15 x 7mm
Stroomverbruik: 20 mA @ 5V
Temperatuur: -40 ~ 85 graden C

An optional CNC, anodized metal folding handle that will fit most of the RADIOMASTER multi-protocol series of transmitters.

Complement your RADIOMASTER TX16S transmitter with these very smart and comfortable leather side grips. These grips are made of brown leather,  other colors are available.

A replacement ORX 3-Axis gyro for the Durafly Prime Tundra PT1200 STOL Trainer-Sports Model.

Features:
• Gyro stability for roll, pitch, and yaw
• Small and lightweight
• Easy set-up
• 3 modes: Gyro off/Gyro on/Trainer mode

Gyro off means no stabilization from the gyro at all. Gyro on gives some gyro stability and full control surface deflection. Trainer mode gives a lot more gyro stability, and also limits the amount of control deflection, will also self-right the model to a normal flying attitude.

This is the perfect protection for the transport and storage of your precious R/C transmitter.  It features lightweight construction, yet is rigid enough to protect your transmitter during transportation. It has dual zippers, a removable carrying strap, and pockets inside to accommodate a wide variety of accessories such as a spare TX battery, charger, neck strap, and much more!

Two self-adhesive foam blocks are included for the inside so you can adjust these as necessary to accommodate your specific transmitter. Also, these include hook & loop backing so they can be moved to whichever position you require very quickly and easily. A hook & loop strap is integrated into the bag to ensure your transmitter stays put.

Specs:
Inner Dimensions: 290x190x100mm
Weight: 450g
Color: Grey/Orange

This is the perfect protection for the transport and storage of your precious R/C transmitter. It features lightweight construction, yet is rigid enough to protect your transmitter during transportation. It has dual zippers, a removable carrying strap, and pockets inside to accommodate a wide variety of accessories such as a spare TX battery, charger, neck strap, and much more!

Two self-adhesive foam blocks are included for the inside so you can adjust these as necessary to accommodate your specific transmitter. Also, these include hook & loop backing so they can be moved to whichever position you require very quickly and easily. A hook & loop strap is integrated into the bag to ensure your transmitter stays put.

Specs:
Inner Dimensions: 290x190x100mm
Weight: 450g
Color: Red/Grey

This is the perfect protection for the transport and storage of your precious R/C transmitter. It features lightweight construction, yet is rigid enough to protect your transmitter during transportation. It has dual zippers, a removable carrying strap, and pockets inside to accommodate a wide variety of accessories such as a spare TX battery, charger, neck strap, and much more!

Two self-adhesive foam blocks are included for the inside so you can adjust these as necessary to accommodate your specific transmitter. Also, these include hook & loop backing so they can be moved to whichever position you require very quickly and easily. A hook & loop strap is integrated into the bag to ensure your transmitter stays put.

Specs:
Inner Dimensions: 290x190x100mm
Weight: 450g
Color: Black/Orange

The FrSky FLVS ADV sensor is designed to measure the battery voltage of 2S~8S Li-Po batteries at 0.01V voltage resolution. The data can be transmitted via the F.Port or Smart Port (S.Port) of telemetry-enabled receivers such as the FrSky X8R, X6R, X4R, etc to compatible transmitters, such as the Taranis or other OpenTx radios. This is an obvious choice for accurate measurement of large-capacity Li-Po batteries.

FrSky has enhanced the performance and capability of its original sensors, resulting in the development of the new ADVANCE (ADV) series. All ADV sensors fully support the FBUS protocol and they are also S.Port compatible. With the FBUS protocol, the ADV sensors can be seamlessly paired with an FBUS-capable receiver which further simplifies model builds.

The FrSky High Precision Vario Sensor monitors atmospheric pressure and reports altitude and changes in pressure, this will indicate where the lift is which is invaluable if you want to find thermals with your RC glider.

The advanced high-precision variometer sensor calculates the altitude from atmospheric pressure, the atmospheric pressure drops as you rise in altitude. Using this change in pressure the sensor can measure the altitude up to 10000 meters with an accuracy tolerance of 0.1 meters. This unit has been designed to be used in conjunction with FrSky telemetry-enabled transmitter and receiver system.

This advanced telemetry sensor incorporates a GPS module to provide useful variable directional information such as position, speed, distance, altitude, and UTC time. It can then be displayed in real-time on FrSky's Taranis transmitters, this can also be logged onto the radio's SD card. This location data is particularly useful for "lost aircraft situations" providing you with the coordinates of your lost model if it's still in radio range or its last known position if not.

The ADV series GPS sensor provides accurate time synchronization with GPS satellites, working with the integrated “Auto adjust from GPS” function in the ETHOS system. This ensures the radio and its telemetry are all in sync with an accurate time system, ensuring telemetry data is in sync with UTC time. This sensor will only work with the FrSky F.Port and Smart Port-enabled receivers. It does not provide autonomous GPS navigation or an RTH mode for your model; it is purely to provide data to your radio.

Easy to use, simply follow the links on the FrSKY website, connect the receiver to the STK and plug the STK into your computer via the USB port. The FrSKY STK updates all FrSKY receivers that support S.Port.

This handy programming box for the OrangeRx R620X to R1220X V3 and RR12RDTS receivers is perfect to have in your toolbox at the flying field in case you want to change the settings without the need for a PC. It has an integrated RF module that allows you to set up the receiver wirelessly or you can use a wired connection. As the RR12RDTS is primarily designed for drones and helicopters this programming box can also be used to adjust the settings of the flight stabilization systems.

FrSky M7-R hall sensor gimbal is specially designed for FPV racing, 3D and acrobatic fixed wing and 3D Heli pilots who are using the FrSky Taranis Q X7/X7S Transmitter. The 45°throttle travel will allow you to achieve a quick throttle response resulting in precision control.

This kit comes complete with the FrSky Taranis X-Lite BRACE. There are also red replacement gimbal stick ends in two sizes, short and long, depending on your needs.

Als je je zorgen maakt over krassen op het scherm van de Evolution PRO's of beschadiging van een stuurknuppel tijdens het transport, dan voldoet deze hoes aan al je eisen. Hij klikt eenvoudig op de voorkant van je controller om het scherm veilig te bewaken en blijft plakken. Het komt in zwart of wit.

Als je je zorgen maakt over krassen op het scherm van de Evolution PRO's of beschadiging van een stuurknuppel tijdens het transport, dan voldoet deze hoes aan al je eisen. Hij klikt eenvoudig op de voorkant van je controller om het scherm veilig te bewaken en blijft plakken. Het komt in zwart of wit.