Elektronische Snelheidsregelaars

We zijn nu trots om onze HobbyKing YEP ESC-serie bieden. Met helikopter specifieke programmering opties zoals super glad soft start, vaste RPM-modus (gouverneur-modus) en ultra hoge resolutie, zult u niet vinden van een betere helikopter ESC op de markt vandaag!

We hebben deze eenheden op onze eigen helikopters getest en ze als een van de beste die we ooit hebben gezien. De super glad soft start, samen met zijn ultra hoge resolutie gasrespons zet dit ESC in een klasse apart!

De YEP serie SER bieden niet alleen uitstekende prestaties voor helicopters, ze zijn ook goed geschikt voor vaste vleugels gebruik met een hele reeks programmeerbare functies.

HobbyKing YEP SER's zijn gebouwd met de hoogste kwaliteit componenten om true-to-rating huidige behandeling en hoge werking efficiëntie.

Alle HobbyKing YEP SER's kunnen worden geprogrammeerd via optionele programmeren kaart of door de zender stok ingangen.

Kenmerken:
• Krachtige 5.5V / 4A Overschakelen BEC
• Optionele programmering kaart voor gemakkelijke setup
• Super fijne gashendel resolutie voorziet in eerste klas en zeer nauwkeurige lineariteit
• Super soepele verstelbare start-up modus
• Constant RPM-modus (gouverneur-modus)
• Verstelbare F3A rem.
• 3 stappen instelbaar normaal EMF rem
• Hoge anti-interferentie vermogen
• Laag voltage cut-off bescherming met automatische aanpassing voor NiCd / NiMH / Li-Ion / LiPo / LiFePO4
• Soft cut-off optie bij lage spanning, vertraagt ​​de motor RPM geleidelijke in plaats van harde cutoff (LVC)
• Laag voltage cut-off kan worden uitgeschakeld
• Variabele cut-off voltage / cel
• Actieve freewheelen circuit zorgt voor onbeperkte "deellast" -mogelijkheid
• LED-status beeldscherm
• Instelbare motor timing van 0 ° tot 30 °
• Geblokkeerde rotatie bescherming (zintuigen een vastgelopen motor en stopt de motor rotatie)
• Motor omkeren van ESC (geen noodzaak om ESC / motor draden te wijzigen)
• Overtemperatuurbeveiliging en overbelasting alarm
• Throttle signaal verloren bescherming. Als het signaal verloren gaat gedurende 3 seconden, zal de stroom automatisch cut-off.
• Veilig power-on. (Motor zal niet starten totdat gas is teruggekeerd naar de laagste stand)


*** Deze ESC is compatibel met zowel helikopters en vliegtuigen modellen. ***


Specificatie:
Max Cont Current: 18A
Max Burst stroom: 20A gedurende 10 seconden
Input Voltage: 2-4 cellen Li-XX of 6-12 Ni-MH / Ni-Cd batterij
BEC: 5.5V / 4A Overschakelen BEC
PWM: 8 ~ 16 KHz
Max RPM: 240,000rpm voor 2 Polen borstelloze motor
PCB Grootte: 34x24x9mm
Gewicht: 22g (inclusief draden)

We zijn nu trots om onze Hobbyking YEP ESC-serie bieden. Met helikopter specifieke programmering opties zoals super glad soft start, vaste RPM-modus (gouverneur-modus) en ultra hoge resolutie, zult u niet vinden van een betere helikopter ESC op de markt vandaag!

We hebben deze eenheden op onze eigen helikopters getest en ze als een van de beste die we ooit hebben gezien. De super glad soft start, samen met zijn ultra hoge resolutie gasrespons zet dit ESC in een klasse apart!

De YEP serie SER bieden niet alleen uitstekende prestaties voor helicopters, ze zijn ook goed geschikt voor vaste vleugels gebruik met een hele reeks programmeerbare functies.

Hobbyking YEP SER's zijn gebouwd met de hoogste kwaliteit componenten om true-to-rating huidige behandeling en hoge werking efficiëntie.

Alle Hobbyking YEP SER's kunnen worden geprogrammeerd via optionele programmeren kaart of door de zender stok ingangen.

Kenmerken:
• Krachtige 5.5V / 5A Switching BEC
• Optionele programmering kaart voor gemakkelijke setup
• Super fijne gashendel resolutie voorziet in eerste klas en zeer nauwkeurige lineariteit
• Super soepele verstelbare start-up modus
• Constant RPM-modus (gouverneur-modus)
• Verstelbare F3A rem.
• 3 stappen instelbaar normaal EMF rem
• Hoge anti-interferentie vermogen
• Laag voltage cut-off bescherming met automatische aanpassing voor NiCd / NiMH / Li-Ion / LiPo / LiFePO4
• Soft cut-off optie bij lage spanning, vertraagt ​​de motor RPM geleidelijke in plaats van harde cutoff (LVC)
• Laag voltage cut-off kan worden uitgeschakeld
• Variabele cut-off voltage / cel
• Actieve freewheelen circuit zorgt voor onbeperkte "deellast" -mogelijkheid
• LED-status beeldscherm
• Instelbare motor timing van 0 ° tot 30 °
• Geblokkeerde rotatie bescherming (zintuigen een vastgelopen motor en stopt de motor rotatie)
• Motor omkeren van ESC (geen noodzaak om ESC / motor draden te wijzigen)
• Overtemperatuurbeveiliging en overbelasting alarm
• Throttle signaal verloren bescherming. Als het signaal verloren gaat gedurende 3 seconden, zal de stroom automatisch cut-off.
• Veilig power-on. (Motor zal niet starten totdat gas is teruggekeerd naar de laagste stand)


*** Deze ESC is compatibel met zowel helikopters en vliegtuigen modellen. ***


Specificatie:
Max Cont Current: 40A
Max Burst stroom: 50A gedurende 10 seconden
Input Voltage: 2-6 cellen Li-XX of 6-16 Ni-MH / Ni-Cd batterij
BEC: 5.5V / 5A Switching BEC
PWM: 8 ~ 16 KHz
Max RPM: 240,000rpm voor 2 Polen borstelloze motor
PCB Grootte: 50x25x12mm
Gewicht: 43 g (met inbegrip van draden)

HobbyKing X-Car series SER bieden uitstekende prestaties en functies voor een geweldige prijs. Met nauwkeurig gas lineariteit, vlotte startup / acceleratie, sterk remmen en volledig instelbare programmering opties, zult u niet een betere waarde in R / C auto SER vinden op de markt vandaag!

Gebouwd met hoogwaardige componenten, en het aanbieden van zowel sensored en senorless motorbedrijf, dit is echt een veelzijdige high performance ESC dat gewoon de bank te breken.

Kenmerken:
• Verbeterde gasrespons, nauwkeurig gas lineariteit, een uitstekende acceleratie en krachtig remmen
• Programmeerbaar met de Hobbyking X-Car programmering kaart om aanpassingen te maken. (apart verkocht)
• detecteert automatisch het aantal cellen in de accu.
• Meerdere beveiligingsfuncties: Laag voltage bescherming cut-off, over-bescherming tegen hitte, gas signaalverlies bescherming en de motor geblokkeerd bescherming.
• Ondersteunt zowel sensored en sensorloze borstelloze motoren.
• Compatibel met NOVAK, LRP en ORION sensored borstelloze motor.
• Ingebouwde koelventilator
• Programmeerbare via USB (USB-adapter apart verkrijgbaar)

specs:
Continu Stroom: 80A
Burst Current: 450A
Geschikte auto: 1/10 on en off-road
Batterij: 2-3 cellen Lipo (5-10 cellen NI-xx)
BEC uitgang: 5.7V / 3A switch mode ingebouwde
Motortype: Sensorloze en sensored borstelloze motoren
Running mode: Aanvaller alleen of doorsturen met reverse (programmeerbare modus)
Afmetingen: 44 x 34 x 31,5 mm
Gewicht: 85g

inclusief:
80A Sensored / Sensorloze Brushless ESC
Sensor kabel (6-pins)

* Opmerking: Zie gerelateerde items hieronder voor compatibele USB-adapter.

specs:
Constant Current: 6A
Burst Stroom: 8A
Batterij: 2-3S LiPoly / 5-8s NiXX
BEC: 5v / 0.5A
Motor Type: Sensorloze Brushless
Grootte: 22x6x13mm
Gewicht: 6g

specs:
Constant Current: 10A
Burst Current: 12A
Batterij: 2-3S LiPoly / 5-8s NiXX
BEC: 5 v / 1A
Motor Type: Sensorloze Brushless
Grootte: 26x5x18mm
Gewicht: 8g

Programmering Functies:
Batterij Type: Lipo / NiXX
Brake: On / Off
Voltage Protection: Low / Mid / High
Bescherming mode: Verminder vermogen / Snijd de macht
Timing: Low / Mid / High
Startup: Snel / Normaal / Soft
PWM Frequentie: 8k / 16k
Helikopter-modus: Uit / 5sec / 15sec (Start delay)

A pair of replacement Aerostar 40A ESCs with wiring and connectors for the AVIOS KingTwin 1700.

The Turnigy Plush-32 brushless ESC comes with a 32-bit ARM controller which offers higher resolution, makes it quicker, smoother, and more responsive to your throttle inputs. As you would expect, all the Turnigy Plush-32 are manufactured to the same high-quality standards that you have come to expect with all the Turnigy Plush ESCs.

The Turnigy Plush-32 brushless ESC comes with a 32-bit ARM controller which offers higher resolution, makes it quicker, smoother, and more responsive to your throttle inputs. As you would expect, all the Turnigy Plush-32 are manufactured to the same high-quality standards that you have come to expect with all the Turnigy Plush ESCs.

Now with the updated Rev1.1.0 firmware, these speed controllers offer a few more programming options over previous models. These include motor type, spool-up acceleration, PWM frequency, beacon delay, and an adjustable BEC (this is only available on the 150A). Most of these revisions are self-explanatory but the "Beacon Delay" does require an explanation. The "Beacon Delay" is quite a unique function that will cause the ESC to start "beeping" after a predetermined delay of not using the throttle stick, this can be set via the program card. The loud beeping noise is perfect for finding your model if it gets lost in high grass, standing crops, or in the bush, etc. Please note that you can use your existing Plush 32 programming card but you will not be able to access the revised functions unless you purchase the new Rev1.1.0 programming card.

The Turnigy Plush-32 brushless ESC comes with a 32-bit ARM controller which offers higher resolution, makes it quicker, smoother, and more responsive to your throttle inputs. As you would expect, all the Turnigy Plush-32 are manufactured to the same high-quality standards that you have come to expect with all the Turnigy Plush ESCs.

Now with the updated Rev1.1.0 firmware, these speed controllers offer a few more programming options over previous models. These include motor type, spool-up acceleration, PWM frequency, beacon delay, and an adjustable BEC (this is only available on the 150A). Most of these revisions are self-explanatory but the "Beacon Delay" does require an explanation. The "Beacon Delay" is quite a unique function that will cause the ESC to start "beeping" after a predetermined delay of not using the throttle stick, this can be set via the program card. The loud beeping noise is perfect for finding your model if it gets lost in high grass, standing crops, or in the bush, etc. Please note that you can use your existing Plush 32 programming card but you will not be able to access the revised functions unless you purchase the new Rev1.1.0 programming card.

The Turnigy Plush-32 brushless ESC comes with a 32-bit ARM controller which offers higher resolution, makes it quicker, smoother, and more responsive to your throttle inputs. As you would expect, all the Turnigy Plush-32 are manufactured to the same high-quality standards that you have come to expect with all the Turnigy Plush ESCs.

Now with the updated Rev1.1.0 firmware, these speed controllers offer a few more programming options over previous models. These include motor type, spool-up acceleration, PWM frequency, beacon delay, and an adjustable BEC (this is only available on the 150A). Most of these revisions are self-explanatory but the "Beacon Delay" does require an explanation. The "Beacon Delay" is quite a unique function that will cause the ESC to start "beeping" after a predetermined delay of not using the throttle stick, this can be set via the program card. The loud beeping noise is perfect for finding your model if it gets lost in high grass, standing crops, or in the bush, etc. Please note that you can use your existing Plush 32 programming card but you will not be able to access the revised functions unless you purchase the new Rev1.1.0 programming card.

The Turnigy Plush-32 brushless ESC comes with a 32-bit ARM controller which offers higher resolution, makes it quicker, smoother, and more responsive to your throttle inputs. As you would expect, all the Turnigy Plush-32 are manufactured to the same high-quality standards that you have come to expect with all the Turnigy Plush ESCs.

Now with the updated Rev1.1.0 firmware, these speed controllers offer a few more programming options over previous models. These include motor type, spool-up acceleration, PWM frequency, beacon delay, and an adjustable BEC (this is only available on the 150A). Most of these revisions are self-explanatory but the "Beacon Delay" does require an explanation. The "Beacon Delay" is quite a unique function that will cause the ESC to start "beeping" after a predetermined delay of not using the throttle stick, this can be set via the program card. The loud beeping noise is perfect for finding your model if it gets lost in high grass, standing crops, or in the bush, etc. Please note that you can use your existing Plush 32 programming card but you will not be able to access the revised functions unless you purchase the new Rev1.1.0 programming card.

The Turnigy Plush-32 brushless ESC comes with a 32-bit ARM controller which offers higher resolution, makes it quicker, smoother, and more responsive to your throttle inputs. As you would expect, all the Turnigy Plush-32 are manufactured to the same high-quality standards that you have come to expect with all the Turnigy Plush ESCs.

Now with the updated Rev1.1.0 firmware, these speed controllers offer a few more programming options over previous models. These include motor type, spool-up acceleration, PWM frequency, beacon delay, and an adjustable BEC (this is only available on the 150A). Most of these revisions are self-explanatory but the "Beacon Delay" does require an explanation. The "Beacon Delay" is quite a unique function that will cause the ESC to start "beeping" after a predetermined delay of not using the throttle stick, this can be set via the program card. The loud beeping noise is perfect for finding your model if it gets lost in high grass, standing crops, or in the bush, etc. Please note that you can use your existing Plush 32 programming card but you will not be able to access the revised functions unless you purchase the new Rev1.1.0 programming card.

The Turnigy Plush-32 brushless ESC comes with a 32-bit ARM controller which offers higher resolution, makes it quicker, smoother, and more responsive to your throttle inputs. As you would expect, all the Turnigy Plush-32 are manufactured to the same high-quality standards that you have come to expect with all the Turnigy Plush ESCs.

Now with the updated Rev1.1.0 firmware, these speed controllers offer a few more programming options over previous models. These include motor type, spool-up acceleration, PWM frequency, beacon delay, and an adjustable BEC (this is only available on the 150A). Most of these revisions are self-explanatory but the "Beacon Delay" does require an explanation. The "Beacon Delay" is quite a unique function that will cause the ESC to start "beeping" after a predetermined delay of not using the throttle stick, this can be set via the program card. The loud beeping noise is perfect for finding your model if it gets lost in high grass, standing crops, or in the bush, etc. Please note that you can use your existing Plush 32 programming card but you will not be able to access the revised functions unless you purchase the new Rev1.1.0 programming card.

The Turnigy Plush-32 brushless ESC comes with a 32-bit ARM controller which offers higher resolution, makes it quicker, smoother, and more responsive to your throttle inputs. As you would expect, all the Turnigy Plush-32 are manufactured to the same high-quality standards that you have come to expect with all the Turnigy Plush ESCs.

Now with the updated Rev1.1.0 firmware, these speed controllers offer a few more programming options over previous models. These include motor type, spool-up acceleration, PWM frequency, beacon delay, and an adjustable BEC (this is only available on the 150A). Most of these revisions are self-explanatory but the "Beacon Delay" does require an explanation. The "Beacon Delay" is quite a unique function that will cause the ESC to start "beeping" after a predetermined delay of not using the throttle stick, this can be set via the program card. The loud beeping noise is perfect for finding your model if it gets lost in high grass, standing crops, or in the bush, etc. Please note that you can use your existing Plush 32 programming card but you will not be able to access the revised functions unless you purchase the new Rev1.1.0 programming card.

The Turnigy Plush-32 brushless ESC comes with a 32-bit ARM controller which offers higher resolution, makes it quicker, smoother, and more responsive to your throttle inputs. As you would expect, all the Turnigy Plush-32 are manufactured to the same high-quality standards that you have come to expect with all the Turnigy Plush ESCs.

Now with the updated Rev1.1.0 firmware, these speed controllers offer a few more programming options over previous models. These include motor type, spool-up acceleration, PWM frequency, beacon delay, and an adjustable BEC (this is only available on the 150A). Most of these revisions are self-explanatory but the "Beacon Delay" does require an explanation. The "Beacon Delay" is quite a unique function that will cause the ESC to start "beeping" after a predetermined delay of not using the throttle stick, this can be set via the program card. The loud beeping noise is perfect for finding your model if it gets lost in high grass, standing crops, or in the bush, etc. Please note that you can use your existing Plush 32 programming card but you will not be able to access the revised functions unless you purchase the new Rev1.1.0 programming card.

The Aerostar RVS G2 next-generation range of brushless speed controllers moves up a notch from the ground-breaking original Aerostar RVS ESCs. They are more compact, lighter, and process faster due to high-performance 32bit technology, have improved functionality and programmable features, and an upgraded, high-amp SBEC system. New generation MOSFETs ensure that the ESC stays within operating temperatures, and can also safely handle the peak current draw specified. Our RVS (reverse function system) is now instantaneous, with no need for the motor to stop turning, this makes it perfect for EDF braking (reverse thrust), and waterplanes for taxiing, etc. If you don't require the reverse function, simply do not connect the second lead to your receiver, it will then operate as a standard ESC.

The Aerostar RVS G2 next-generation range of brushless speed controllers moves up a notch from the ground-breaking original Aerostar RVS ESCs. They are more compact, lighter, and process faster due to high-performance 32bit technology, have improved functionality and programmable features, and an upgraded, high-amp SBEC system. New generation MOSFETs ensure that the ESC stays within operating temperatures, and can also safely handle the peak current draw specified. Our RVS (reverse function system) is now instantaneous, with no need for the motor to stop turning, this makes it perfect for EDF braking (reverse thrust), and waterplanes for taxiing, etc. If you don't require the reverse function, simply do not connect the second lead to your receiver, it will then operate as a standard ESC.

The Aerostar RVS G2 next-generation range of brushless speed controllers moves up a notch from the ground-breaking original Aerostar RVS ESCs. They are more compact, lighter, and process faster due to high-performance 32bit technology, have improved functionality and programmable features, and an upgraded, high-amp SBEC system. New generation MOSFETs ensure that the ESC stays within operating temperatures, and can also safely handle the peak current draw specified. Our RVS (reverse function system) is now instantaneous, with no need for the motor to stop turning, this makes it perfect for EDF braking (reverse thrust), and waterplanes for taxiing, etc. If you don't require the reverse function, simply do not connect the second lead to your receiver, it will then operate as a standard ESC.

The Aerostar RVS G2 next-generation range of brushless speed controllers moves up a notch from the ground-breaking original Aerostar RVS ESCs. They are more compact, lighter, and process faster due to high-performance 32bit technology, have improved functionality and programmable features, and an upgraded, high-amp SBEC system. New generation MOSFETs ensure that the ESC stays within operating temperatures, and can also safely handle the peak current draw specified. Our RVS (reverse function system) is now instantaneous, with no need for the motor to stop turning, this makes it perfect for EDF braking (reverse thrust), and waterplanes for taxiing, etc. If you don't require the reverse function, simply do not connect the second lead to your receiver, it will then operate as a standard ESC.

The Aerostar RVS G2 next-generation range of brushless speed controllers moves up a notch from the ground-breaking original Aerostar RVS ESCs. They are more compact, lighter, and process faster due to high-performance 32bit technology, have improved functionality and programmable features, and an upgraded, high-amp SBEC system. New generation MOSFETs ensure that the ESC stays within operating temperatures, and can also safely handle the peak current draw specified. Our RVS (reverse function system) is now instantaneous, with no need for the motor to stop turning, this makes it perfect for EDF braking (reverse thrust), and waterplanes for taxiing, etc. If you don't require the reverse function, simply do not connect the second lead to your receiver, it will then operate as a standard ESC.

The Aerostar RVS G2 next-generation range of brushless speed controllers moves up a notch from the ground-breaking original Aerostar RVS ESCs. They are more compact, lighter, and process faster due to high-performance 32bit technology, have improved functionality and programmable features, and an upgraded, high-amp SBEC system. New generation MOSFETs ensure that the ESC stays within operating temperatures, and can also safely handle the peak current draw specified. Our RVS (reverse function system) is now instantaneous, with no need for the motor to stop turning, this makes it perfect for EDF braking (reverse thrust), and waterplanes for taxiing, etc. If you don't require the reverse function, simply do not connect the second lead to your receiver, it will then operate as a standard ESC.

The Aerostar RVS G2 next-generation range of HV Opto brushless speed controllers moves these amazing ESCs up a notch from the ground-breaking original Aerostar RVS HV ESCs. New generation MOSFETs with the aid of the highly efficient cooling fan and finned, aluminum heatsink, ensure that the ESC stays within operating temperatures at all times, and can also safely handle the peak current draw specified. They process much faster due to the high-performance 32bit M4 microprocessor running at 170MHz, and have improved functionality and programmable features. Our RVS (reverse function system) is now instantaneous, with no need for the motor to stop turning, this makes it perfect for EDF braking (reverse thrust), and waterplanes for taxiing, etc. If you don't require the reverse function, simply do not connect the second lead to your receiver, it will then operate as a standard ESC.

The Aerostar RVS G2 next-generation range of HV Opto brushless speed controllers moves these amazing ESCs up a notch from the ground-breaking original Aerostar RVS HV ESCs. New generation MOSFETs with the aid of the highly efficient cooling fan and finned, aluminum heatsink, ensure that the ESC stays within operating temperatures at all times, and can also safely handle the peak current draw specified. They process much faster due to the high-performance 32bit M4 microprocessor running at 170MHz, and have improved functionality and programmable features. Our RVS (reverse function system) is now instantaneous, with no need for the motor to stop turning, this makes it perfect for EDF braking (reverse thrust), and waterplanes for taxiing, etc. If you don't require the reverse function, simply do not connect the second lead to your receiver, it will then operate as a standard ESC.

The Aerostar RVS G2 next-generation range of brushless speed controllers moves up a notch from the ground-breaking original Aerostar RVS ESCs. They are more compact, lighter, and process faster due to high-performance 32bit technology, have improved functionality and programmable features, and an upgraded, high-amp SBEC system. New generation MOSFETs ensure that the ESC stays within operating temperatures, and can also safely handle the peak current draw specified. Our RVS (reverse function system) is now instantaneous, with no need for the motor to stop turning, this makes it perfect for EDF braking (reverse thrust), and waterplanes for taxiing, etc. If you don't require the reverse function, simply do not connect the second lead to your receiver, it will then operate as a standard ESC.

A replacement Aerostar G2 30A ESC for the Durafly MFX Racer.

Upgrade je 1/18 RC rock crawler van een borstelmotor setup naar deze soepele en krachtige sensored brushless motor en ESC combo. De kwaliteitsborstelloze motor heeft een unieke stator van 0,2 mm siliciumstaalplaat, een explosieveilige magnetische rotor en produceert een indrukwekkend maximumvermogen van 120 watt. De speciaal ontworpen ESC heeft uitstekende start-, acceleratie- en lineaire vermogenskarakteristieken, plus een intelligente koppel- en snelheidsregeling met gesloten lus voor een consistente regeling van het motortoerental onder alle belastingen.

The Hobbywing EZRUN MAX10 G2-140A ESC offers strong, explosive power, linear low-speed control, and a great sense of overall control for your 1/10 RC cars or trucks. With its upgraded, adjustable BEC system making it suitable for HV servos, and its water and dust-proofing to IP-67 standards, it's the perfect choice for all your race needs.

The Hobbywing EZRUN MAX10 G2-80A ESC offers strong, explosive power, linear low-speed control, and a great sense of overall control for your 1/10 RC car or truck. With its upgraded, adjustable BEC system making it suitable for HV servos, and its water and dust-proofing to IP-67 standards, it's the perfect choice for all your race needs.

The Hobbywing EZRUN COMBO-MAX10 G2-80A ESC and 3652SD-5400KV G3 brushless motor offer strong, explosive power, linear low-speed control, and a great sense of control for your 1/10 RC car.

The Hobbywing EZRUN COMBO-MAX10 G2-80A ESC and 3652SD-3300KV G3 brushless motor offer strong, explosive power, linear low-speed control, and a great sense of control for your 1/10 RC car.

The Hobbywing EZRUN COMBO-MAX10 G2-80A ESC and 3652SD-4100KV G3 brushless motor offer strong, explosive power, linear low-speed control, and a great sense of control for your 1/10th RC car.

The Hobbywing QUICRUN Fusion PRO 2300KV 540 sensored brushless motor with integrated 60A brushless ESC greatly reduces the overall size and weight of the conventional separate setup. It has been designed specifically for 1/10 crawlers and offers strong low-speed torque, extremely smooth running at low speeds, and is far superior to the common sensored brushless system that has gone before. This compact combo also includes a powerful, adjustable SBEC system (6~7.4V@6A) which makes it suitable for HV servos.

The Hobbywing QUICRUN 10BL60 60A sensored/sensorless brushless ESC for 1/10-1/12 cars and buggies offers high performance at a low price, it is extremely robust and reliable and is suitable for most types of competitive racing. Its compact size means it is suitable for a variety of car and buggy chassis, and it will auto-identify either sensored or sensorless brushless motors. The temperature of the ESC is kept within limits by the very efficient cooling fan that runs from the 6V BEC system and the finned, aluminum-red anodized heatsink.

The Hobbywing QUICRUN WP range of ESCs is suitable for the harshest of environments when racing or bashing due to its exceptional water-proof and dust-proof design. This protection level is up to IP-67 standards, which means it is splash-proof, water-proof, and dust-proof under normal use, it has not been designed to be permanently immersed in water for any period of time. The G2 version offers innovative intelligent freewheeling technology, is highly efficient, operates at a lower temperature for improved reliability, and has an upgraded BEC system suitable for HV servos. This upgraded BEC system is adjustable from 6-7.4V, with a continuous current of 6A, and an amazing maximum burst current of 12A.

The Hobbywing QUICRUN Fusion SE 1200KV 540 sensored brushless motor with integrated 40A brushless ESC greatly reduces the overall size and weight of the conventional separate setup. It has been designed specifically for 1/10 crawlers and offers strong low-speed torque, extremely smooth running at low speeds, and is far superior to the common sensored brushless system that has gone before. This compact combo also includes a powerful, adjustable SBEC system (6~7.4V@6A) which makes it suitable for HV servos.