Energie Systeem

Complement your RADIOMASTER TX16S transmitter with these very smart and comfortable leather side grips. These grips are made of brown leather,  other colors are available.

A replacement crankshaft set for the Turnigy TP10 10cc gas engine. This set includes the crankshaft, conrod, prop-driver woodruff key, and prop nut.

A replacement crankcase set for the Turnigy TP10 10cc gas engine, this set includes the crankcase, gasket, and 2 x screws.

A replacement prop driver set for the Turnigy TP10 10cc gas engine. This set includes the prop driver with inset magnet, prop washer, and woodruff key.

A replacement crankcase for the Turnigy TP26 26cc gas engine.

A replacement 3025-1000kV brushless motor for the Durafly Prime Tundra PT1200 STOL Trainer-Sports Model.

A replacement ORX 3-Axis gyro for the Durafly Prime Tundra PT1200 STOL Trainer-Sports Model.

Features:
• Gyro stability for roll, pitch, and yaw
• Small and lightweight
• Easy set-up
• 3 modes: Gyro off/Gyro on/Trainer mode

Gyro off means no stabilization from the gyro at all. Gyro on gives some gyro stability and full control surface deflection. Trainer mode gives a lot more gyro stability, and also limits the amount of control deflection, will also self-right the model to a normal flying attitude.

This reliable, lightweight switch-mode UBEC uses a small FET transistor to switch the input power at around 150,000 times a second to produce a very steady, and smooth DC voltage. It can handle an input power of 6V~25V (2S~6S), and the output can be selected via a jumper to deliver a constant current of 5V/6A, 5.5V/6A, or 6V/6A.

A replacement 2627-1000KV brushless motor with X mount and screws for both versions of the Avios C-130 V2, also suitable for the version 1 of the C-130.

Accurately drill your propellers for your TP 35cc gas engine with this easy-to-use drilling jig. The jig is CNC machined from aluminum stock and is supplied with a clamping screw to hold the propeller secure whilst drilling.

Deze gebruiksvriendelijke multifunctionele programmabox met een LCD-interface maakt het programmeren van HobbyWing brushless ESC's zeer snel en eenvoudig. Voor het programmeren kan het op 2 manieren worden gebruikt, ten eerste kan het op zichzelf worden gebruikt om een ​​ESC in te stellen met behulp van de LCD-interface. Ten tweede kan het worden gebruikt als een USB-adapter om de ESC aan een pc te koppelen om via een pc te programmeren en de ESC-firmware bij te werken. Het heeft ook een andere functie waarbij het kan worden gebruikt als een voltmeter om de spanning van LiPo-, Li-Ion- en Li-Fe-batterijpakketten te meten. Wanneer een pack is aangesloten, wordt de volledige pack-spanning weergegeven en ook elke afzonderlijke cel, deze is geschikt voor 2~8S-batterijpakketten.

A replacement 4S 50mm 12 blade ducted fan unit with brushless motor for the H-King F-16 Fighting Falcon 550mm.

A replacement 4S 50mm 12 blade ducted fan unit with brushless motor for the H-King F-18 Super Hornet 588mm.

A replacement 2836-2200Kv brushless motor with prop adapter for the Durafly Me-163B V2 "White 10".

Please note: This replacement part is also suitable for earlier versions of the Durafly Me-163.

The OrangeRx R615X offers true DSMX compatibility and utilizes a dual antenna system to provide true signal reception diversity. Due to the previously used IC becoming obsolete, this latest R615X receiver has been redesigned, and now offers improved range and performance. Features that have been retained are the programmable failsafe on binding, ultra-fast brown-out recovery, and wide voltage input range. As we can maintain the same low price as before, this makes the latest R615X still unbeatable value for money.

This optional magnetic release servo for the Durafly Me-163b V2 allows you to determine when to release the take-off dolly, rather than rely on gravity. It is particularly beneficial if you operate your Me-163b off of a bumpy strip where the model may prematurely jump off of the dolly. It is simple and straightforward to install, and the servo lead is normally plugged into the assigned retract socket of your receiver. The unit is supplied with a magnet which needs to be glued into the top of the take-off dolly.

Please note:  This option part is also suitable for earlier versions of the Durafly Me-163.

The Aerostar RVS G2 next-generation range of brushless speed controllers moves up a notch from the ground-breaking original Aerostar RVS ESCs. They are more compact, lighter, and process faster due to high-performance 32bit technology, have improved functionality and programmable features, and an upgraded, high-amp SBEC system. New generation MOSFETs ensure that the ESC stays within operating temperatures, and can also safely handle the peak current draw specified. Our RVS (reverse function system) is now instantaneous, with no need for the motor to stop turning, this makes it perfect for EDF braking (reverse thrust), and waterplanes for taxiing, etc. If you don't require the reverse function, simply do not connect the second lead to your receiver, it will then operate as a standard ESC.

The Aerostar RVS G2 next-generation range of brushless speed controllers moves up a notch from the ground-breaking original Aerostar RVS ESCs. They are more compact, lighter, and process faster due to high-performance 32bit technology, have improved functionality and programmable features, and an upgraded, high-amp SBEC system. New generation MOSFETs ensure that the ESC stays within operating temperatures, and can also safely handle the peak current draw specified. Our RVS (reverse function system) is now instantaneous, with no need for the motor to stop turning, this makes it perfect for EDF braking (reverse thrust), and waterplanes for taxiing, etc. If you don't require the reverse function, simply do not connect the second lead to your receiver, it will then operate as a standard ESC.

The Aerostar RVS G2 next-generation range of brushless speed controllers moves up a notch from the ground-breaking original Aerostar RVS ESCs. They are more compact, lighter, and process faster due to high-performance 32bit technology, have improved functionality and programmable features, and an upgraded, high-amp SBEC system. New generation MOSFETs ensure that the ESC stays within operating temperatures, and can also safely handle the peak current draw specified. Our RVS (reverse function system) is now instantaneous, with no need for the motor to stop turning, this makes it perfect for EDF braking (reverse thrust), and waterplanes for taxiing, etc. If you don't require the reverse function, simply do not connect the second lead to your receiver, it will then operate as a standard ESC.

The Aerostar RVS G2 next-generation range of brushless speed controllers moves up a notch from the ground-breaking original Aerostar RVS ESCs. They are more compact, lighter, and process faster due to high-performance 32bit technology, have improved functionality and programmable features, and an upgraded, high-amp SBEC system. New generation MOSFETs ensure that the ESC stays within operating temperatures, and can also safely handle the peak current draw specified. Our RVS (reverse function system) is now instantaneous, with no need for the motor to stop turning, this makes it perfect for EDF braking (reverse thrust), and waterplanes for taxiing, etc. If you don't require the reverse function, simply do not connect the second lead to your receiver, it will then operate as a standard ESC.

The Aerostar RVS G2 next-generation range of brushless speed controllers moves up a notch from the ground-breaking original Aerostar RVS ESCs. They are more compact, lighter, and process faster due to high-performance 32bit technology, have improved functionality and programmable features, and an upgraded, high-amp SBEC system. New generation MOSFETs ensure that the ESC stays within operating temperatures, and can also safely handle the peak current draw specified. Our RVS (reverse function system) is now instantaneous, with no need for the motor to stop turning, this makes it perfect for EDF braking (reverse thrust), and waterplanes for taxiing, etc. If you don't require the reverse function, simply do not connect the second lead to your receiver, it will then operate as a standard ESC.

The Aerostar RVS G2 next-generation range of brushless speed controllers moves up a notch from the ground-breaking original Aerostar RVS ESCs. They are more compact, lighter, and process faster due to high-performance 32bit technology, have improved functionality and programmable features, and an upgraded, high-amp SBEC system. New generation MOSFETs ensure that the ESC stays within operating temperatures, and can also safely handle the peak current draw specified. Our RVS (reverse function system) is now instantaneous, with no need for the motor to stop turning, this makes it perfect for EDF braking (reverse thrust), and waterplanes for taxiing, etc. If you don't require the reverse function, simply do not connect the second lead to your receiver, it will then operate as a standard ESC.

The Aerostar RVS G2 next-generation range of HV Opto brushless speed controllers moves these amazing ESCs up a notch from the ground-breaking original Aerostar RVS HV ESCs. New generation MOSFETs with the aid of the highly efficient cooling fan and finned, aluminum heatsink, ensure that the ESC stays within operating temperatures at all times, and can also safely handle the peak current draw specified. They process much faster due to the high-performance 32bit M4 microprocessor running at 170MHz, and have improved functionality and programmable features. Our RVS (reverse function system) is now instantaneous, with no need for the motor to stop turning, this makes it perfect for EDF braking (reverse thrust), and waterplanes for taxiing, etc. If you don't require the reverse function, simply do not connect the second lead to your receiver, it will then operate as a standard ESC.

The Aerostar RVS G2 next-generation range of HV Opto brushless speed controllers moves these amazing ESCs up a notch from the ground-breaking original Aerostar RVS HV ESCs. New generation MOSFETs with the aid of the highly efficient cooling fan and finned, aluminum heatsink, ensure that the ESC stays within operating temperatures at all times, and can also safely handle the peak current draw specified. They process much faster due to the high-performance 32bit M4 microprocessor running at 170MHz, and have improved functionality and programmable features. Our RVS (reverse function system) is now instantaneous, with no need for the motor to stop turning, this makes it perfect for EDF braking (reverse thrust), and waterplanes for taxiing, etc. If you don't require the reverse function, simply do not connect the second lead to your receiver, it will then operate as a standard ESC.

This Aerostar programming card is designed specifically for the RVS G2 series of electronic speed controllers. Please note that it is not compatible with earlier versions of the Aerostar RVS speed controllers.

The Aerostar RVS G2 next-generation range of brushless speed controllers moves up a notch from the ground-breaking original Aerostar RVS ESCs. They are more compact, lighter, and process faster due to high-performance 32bit technology, have improved functionality and programmable features, and an upgraded, high-amp SBEC system. New generation MOSFETs ensure that the ESC stays within operating temperatures, and can also safely handle the peak current draw specified. Our RVS (reverse function system) is now instantaneous, with no need for the motor to stop turning, this makes it perfect for EDF braking (reverse thrust), and waterplanes for taxiing, etc. If you don't require the reverse function, simply do not connect the second lead to your receiver, it will then operate as a standard ESC.

A replacement 2212-2200KV brushless motor with motor mount, and prop adapter for the Durafly MFX Racer.

A replacement Aerostar G2 30A ESC for the Durafly MFX Racer.

Upgrade je 1/18 RC rock crawler van een borstelmotor setup naar deze soepele en krachtige sensored brushless motor en ESC combo. De kwaliteitsborstelloze motor heeft een unieke stator van 0,2 mm siliciumstaalplaat, een explosieveilige magnetische rotor en produceert een indrukwekkend maximumvermogen van 120 watt. De speciaal ontworpen ESC heeft uitstekende start-, acceleratie- en lineaire vermogenskarakteristieken, plus een intelligente koppel- en snelheidsregeling met gesloten lus voor een consistente regeling van het motortoerental onder alle belastingen.

This is the perfect protection for the transport and storage of your precious R/C transmitter.  It features lightweight construction, yet is rigid enough to protect your transmitter during transportation. It has dual zippers, a removable carrying strap, and pockets inside to accommodate a wide variety of accessories such as a spare TX battery, charger, neck strap, and much more!

Two self-adhesive foam blocks are included for the inside so you can adjust these as necessary to accommodate your specific transmitter. Also, these include hook & loop backing so they can be moved to whichever position you require very quickly and easily. A hook & loop strap is integrated into the bag to ensure your transmitter stays put.

Specs:
Inner Dimensions: 290x190x100mm
Weight: 450g
Color: Grey/Orange

This is the perfect protection for the transport and storage of your precious R/C transmitter. It features lightweight construction, yet is rigid enough to protect your transmitter during transportation. It has dual zippers, a removable carrying strap, and pockets inside to accommodate a wide variety of accessories such as a spare TX battery, charger, neck strap, and much more!

Two self-adhesive foam blocks are included for the inside so you can adjust these as necessary to accommodate your specific transmitter. Also, these include hook & loop backing so they can be moved to whichever position you require very quickly and easily. A hook & loop strap is integrated into the bag to ensure your transmitter stays put.

Specs:
Inner Dimensions: 290x190x100mm
Weight: 450g
Color: Red/Grey

This is the perfect protection for the transport and storage of your precious R/C transmitter. It features lightweight construction, yet is rigid enough to protect your transmitter during transportation. It has dual zippers, a removable carrying strap, and pockets inside to accommodate a wide variety of accessories such as a spare TX battery, charger, neck strap, and much more!

Two self-adhesive foam blocks are included for the inside so you can adjust these as necessary to accommodate your specific transmitter. Also, these include hook & loop backing so they can be moved to whichever position you require very quickly and easily. A hook & loop strap is integrated into the bag to ensure your transmitter stays put.

Specs:
Inner Dimensions: 290x190x100mm
Weight: 450g
Color: Black/Orange

A standard 45A car ESC with forward, reverse, and a good range of features such as timing adjustment and braking. It supports a wide range of sensorless brushless motors including 2 pole 240,000rpm, 6 pole 80,000rpm, and 12 pole 40,000rpm.

The Hobbywing EZRUN MAX10 G2-140A ESC offers strong, explosive power, linear low-speed control, and a great sense of overall control for your 1/10 RC cars or trucks. With its upgraded, adjustable BEC system making it suitable for HV servos, and its water and dust-proofing to IP-67 standards, it's the perfect choice for all your race needs.

The Hobbywing EZRUN MAX10 G2-80A ESC offers strong, explosive power, linear low-speed control, and a great sense of overall control for your 1/10 RC car or truck. With its upgraded, adjustable BEC system making it suitable for HV servos, and its water and dust-proofing to IP-67 standards, it's the perfect choice for all your race needs.