Opladers

The ToolkitRC Q6AC is a 4-channel (Quad) smart charger that will independently charge/discharge 4 batteries at the same time. The Q6AC has a built-in 400W power supply that allows it to be powered from a 100~240V AC mains power source. It also can operate on a 7~30V DC external power source of up to 1000W (input connection XT90) which is perfect for extreme fast charging at the flying field, race track, or boating lake. Another feature of the Q6AC is a built-in wireless charging system, so say goodbye to tangled wires. This system supports devices with the ability to wireless charge such as mobile phones, etc at up to a charge rate of 15W.

The ToolkitRC Q6AC is a 4-channel (Quad) smart charger that will independently charge/discharge 4 batteries at the same time. The Q6AC has a built-in 400W power supply that allows it to be powered from a 100~240V AC mains power source. It also can operate on a 7~30V DC external power source of up to 1000W (input connection XT90) which is perfect for extreme fast charging at the flying field, race track, or boating lake. Another feature of the Q6AC is a built-in wireless charging system, so say goodbye to tangled wires. This system supports devices with the ability to wireless charge such as mobile phones, etc at up to a charge rate of 15W.

The ToolkitRC Q6AC is a 4-channel (Quad) smart charger that will independently charge/discharge 4 batteries at the same time. The Q6AC has a built-in 400W power supply that allows it to be powered from a 100~240V AC mains power source. It also can operate on a 7~30V DC external power source of up to 1000W (input connection XT90) which is perfect for extreme fast charging at the flying field, race track, or boating lake. Another feature of the Q6AC is a built-in wireless charging system, so say goodbye to tangled wires. This system supports devices with the ability to wireless charge such as mobile phones, etc at up to a charge rate of 15W.

The Ultra Power UP7 range of chargers uses the latest state-of-the-art technology, is very simple and intuitive to use, and is loaded with lots of features. Their ability to operate from either AC mains or a DC power source of 9~32V means they are extremely versatile, as they can be used at home or when out on the field to charge your batteries.

The UP7 can charge two batteries of different chemistry, and different voltages at the same time as it is two chargers in one unit. The LCD screen is split into two to show the information for each battery pack whilst being set up or charged/discharged. Both charging outputs can charge from 0.1~10A and can charge either 1~6S lithium-type cells (including LiHV), 1~16S NiMH/NiCd, or 1~12S Pb cells.

The Ultra Power UP7 range of chargers uses the latest state-of-the-art technology, is very simple and intuitive to use, and is loaded with lots of features. Their ability to operate from either AC mains or a DC power source of 9~32V means they are extremely versatile, as they can be used at home or when out on the field to charge your batteries.

The UP7 can charge two batteries of different chemistry, and different voltages at the same time as it is two chargers in one unit. The LCD screen is split into two to show the information for each battery pack whilst being set up or charged/discharged. Both charging outputs can charge from 0.1~10A and can charge either 1~6S lithium-type cells (including LiHV), 1~16S NiMH/NiCd, or 1~12S Pb cells.

The Ultra Power UP7 range of chargers uses the latest state-of-the-art technology, is very simple and intuitive to use, and is loaded with lots of features. Their ability to operate from either AC mains or a DC power source of 9~32V means they are extremely versatile, as they can be used at home or when out on the field to charge your batteries.

The UP7 can charge two batteries of different chemistry, and different voltages at the same time as it is two chargers in one unit. The LCD screen is split into two to show the information for each battery pack whilst being set up or charged/discharged. Both charging outputs can charge from 0.1~10A and can charge either 1~6S lithium-type cells (including LiHV), 1~16S NiMH/NiCd, or 1~12S Pb cells.

The Ultra Power UP7 range of chargers uses the latest state-of-the-art technology, is very simple and intuitive to use, and is loaded with lots of features. Their ability to operate from either AC mains or a DC power source of 9~32V means they are extremely versatile, as they can be used at home or when out on the field to charge your batteries.

The UP7 can charge two batteries of different chemistry, and different voltages at the same time as it is two chargers in one unit. The LCD screen is split into two to show the information for each battery pack whilst being set up or charged/discharged. Both charging outputs can charge from 0.1~10A and can charge either 1~6S lithium-type cells (including LiHV), 1~16S NiMH/NiCd, or 1~12S Pb cells.

The Ultra Power UP9 range of chargers uses the latest state-of-the-art technology, is very simple and intuitive to use, and is loaded with lots of features. Their ability to operate from either AC mains or a DC power source of 11~18V means they are extremely versatile, as they can be used at home or when out on the field to charge your batteries.

The UP9 can charge four batteries of the same type and voltage at the same time making it perfect if you use lots of the same batteries to power your models. The large easy-to-read LCD screen shows the information for the battery pack whilst they are being set up, then shows real-time data when the packs are being charged. The charging outputs can simultaneously charge from 0.1~5A up to a max of 50W per port and can charge either 1~6S lithium-type cells (including LiHV), 1~16S NiMH/NiCd, or 1~12S Pb cells.

The Ultra Power UP9 range of chargers uses the latest state-of-the-art technology, is very simple and intuitive to use, and is loaded with lots of features. Their ability to operate from either AC mains or a DC power source of 11~18V means they are extremely versatile, as they can be used at home or when out on the field to charge your batteries.

The UP9 can charge four batteries of the same type and voltage at the same time making it perfect if you use lots of the same batteries to power your models. The large easy-to-read LCD screen shows the information for the battery packs whilst they are being set up, then shows real-time data when the packs are being charged. The charging outputs can simultaneously charge from 0.1~5A up to a max of 50W per port and can charge either 1~6S lithium-type cells (including LiHV), 1~16S NiMH/NiCd, or 1~12S Pb cells.

The Ultra Power UP9 range of chargers uses the latest state-of-the-art technology, is very simple and intuitive to use, and is loaded with lots of features. Their ability to operate from either AC mains or a DC power source of 11~18V means they are extremely versatile, as they can be used at home or when out on the field to charge your batteries.

The UP9 can charge four batteries of the same type and voltage at the same time making it perfect if you use lots of the same batteries to power your models. The large easy-to-read LCD screen shows the information for the battery packs whilst they are being set up, then shows real-time data when the packs are being charged. The charging outputs can simultaneously charge from 0.1~5A up to a max of 50W per port and can charge either 1~6S lithium-type cells (including LiHV), 1~16S NiMH/NiCd, or 1~12S Pb cells.

Laad thuis op 100 / 240v of in het veld op 12v. De B6-AC behandelt zowel!
De IMAX B6-AC V2 is een zeer solide lader dat is in staat om op te laden, in evenwicht te brengen en te ontladen Lion, LiPo, LiFe (A123), NiCd en NiMH-batterijen.
Dit is niet een nep. Het is een echte IMAX B6. Onze schuld koers / winst op deze lader zijn extreem laag.

Kenmerken:
• AC 100 ~ 240V of 12V DC input
• Microprocessor gestuurd
• Delta-peak gevoeligheid
• Individuele cel balancing
• Li-ion, LiPo en LiFe staat
• Ni-Cd en NiMH die in staat
• Store-functie, maakt het mogelijk veilige opslag huidige
• Termijn functie
• data-opslag (Sla tot 5 verpakkingen in het geheugen)
• Ingangsspanning monitoring. (Beschermt de accu's op het veld)
• Batterij inbraak en fietsen

specs:
Input Voltage: 11 ~ 18V
Circuit vermogen: Max Charge: 50W / Max Discharge: 5W
Laad Current Range: 0.1 ~ 6.0a
Kwijting huidige assortiment: 0.1 ~ 2.0A
Ni-MH / NiCd cellen: 1 ~ 15
Li-ion / Poly cellen: 1 ~ 6
Pb accuspanning: 2 ~ 20V
Gewicht: 632g
Afmetingen: 135x144x36mm

Deze lader heeft een JST-XH balans plug, die compatibel is met Zippy, HXT, Turnigy en geen verpakking met een JST adapter maakt.

This amazing charger/discharger can charge up to 200W on AC power and a staggering 700W on DC power all in a tiny package measuring just 108x67x60mm and weighing 410g. It offers high-efficiency power management, active PFC resonant control, short circuit protection, overload protection, over-voltage protection, over-temperature protection, and over-current protection.

This amazing charger/discharger can charge up to 200W on AC power and a staggering 700W on DC power all in a tiny package measuring just 108x67x60mm and weighing 410g. It offers high-efficiency power management, active PFC resonant control, short circuit protection, overload protection, over-voltage protection, over-temperature protection, and over-current protection.

This amazing charger/discharger can charge up to 200W on AC power and a staggering 700W on DC power all in a tiny package measuring just 108x67x60mm and weighing 410g. It offers high-efficiency power management, active PFC resonant control, short circuit protection, overload protection, over-voltage protection, over-temperature protection, and over-current protection.

De SKYRC IMAX B6 is altijd een populaire geavanceerde oplader geweest, die in staat is om LiIon-, LiPo-, LiFe (A123), NiCd-, NiMH- en Pb-batterijen op te laden, in evenwicht te brengen en te ontladen, met de V2 is hij nu nog beter geworden. Het wordt net als alle beste opladers door een microprocessor gestuurd en zal de afzonderlijke cellen in uw Li-XX-batterijen en nog veel meer balanceren. De B6 V2 is een oplader met alleen DC-ingang, hij vereist een DC-ingang van 11~18V die kan worden geleverd door een batterij of een AC-hoofdvoeding.

Het HOTA-assortiment laders/ontladers wordt snel bekend om hun kwaliteit, betrouwbaarheid en tal van geweldige functies. Deze verbazingwekkende dubbele oplader/ontlader kan tot 2 x 300W opladen in een klein pakketje van 111 x 70 x 45mm en met een gewicht van slechts 292 g. Het biedt tal van bescherming om zichzelf of uw accu's te beschermen tegen beschadiging, zoals temperatuurbeveiliging, capaciteitsbeveiliging, invoer- en uitvoeromkeringsbeveiliging, kortsluitingsbeveiliging en nog veel meer. Zie de bijgevoegde gebruikershandleiding voor de volledige lijst met functies en beveiligingen.

ISDT is renowned for its ergonomically designed, small, state-of-the-art battery chargers and accessories. The K1 smart charger continues this great pedigree of efficient and user-friendly chargers.

The ISDT K1 is a simple to use, no-nonsense dual input (AC/DC) charger that can charge two battery packs simultaneously. It has the ability to charge 2 x 6S LiPo, LiIon, LiFe, or LiHV, 10S Pb, or 16S NiMh/NiCd battery packs at up to 10A. Also, each channel can operate independently of each other, meaning that two different sizes or different chemistry batteries can be charged at the same time. You can even combine both channels in parallel for synchronous balance charging to achieve even more output power. The max charging current on AC power is 100W per channel, and on DC power it is 250W per channel. The four programming keys are simple and intuitive to use in conjunction with the color LCD display screen.

The HOTA range of chargers/dischargers is quickly becoming renowned for their quality, reliability, and numerous great features. This amazing 1000W 4-channel charger/discharger can charge 4 x 1~6S LiPo and batteries at up to 4 x 250W, or you can combine 2 outputs together to achieve up to 500W. It offers loads of protection to safeguard against damaging itself or your battery packs such as temperature protection, over-voltage, over-current, input and output reverse protection, short circuit protection, and much more (see the attached manual for the full list). It utilizes a highly optimized algorithm for charging management, and its advanced circuit design offers a 94% operating efficiency.

De ToolkitRC M7AC is een veelzijdige, multifunctionele tool die functies integreert zoals opladen, ontladen, fietsen, signaaltest/signaalbron (PWM/PPM/SBUS), multimeter, slim opladen van dronebatterijen voor consumenten, aanpasbare meertalige gesproken waarschuwingen, en zoveel meer. De M7AC is lichtgewicht en compact en heeft een ingebouwde voeding zodat hij kan werken op een 100~240V AC-netvoedingsbron. Het heeft ook de mogelijkheid om te werken op een 7 ~ 28V DC-voeding die perfect is voor opladen op het vliegveld, racecircuit of roeivijver.

De ToolkitRC M6DAC is een veelzijdige dubbele batterijlader die functies integreert zoals opladen, synchroon opladen, ontladen, fietsen, slim opladen van dronebatterijen voor consumenten, en heeft een meertalige gebruikersinterface. De M6DAC heeft een ingebouwde voeding van 200W waarmee hij kan worden gevoed via een 100 ~ 240V AC-netvoedingsbron. Het heeft ook de mogelijkheid om te werken op een 7 ~ 28V DC-voeding die perfect is voor opladen op het vliegveld, racecircuit of roeivijver.

De ToolkitRC M7 is een veelzijdige, multifunctionele tool die functies integreert zoals opladen, ontladen, fietsen, weerstandsmeting, signaaltest/signaalbron (PWM/PPM/SBUS), multimeter, slim opladen van dronebatterijen voor consumenten en nog veel meer . De M7 is lichtgewicht en compact en werkt op een 7~28V DC-voeding, waardoor hij perfect is om op te laden op het vliegveld, op het racecircuit of op een roeivijver.

The ToolkitRC M6DAC is a versatile dual battery charger that integrates functions such as charging, synchronous charging, discharging, cycling, smart consumer-grade drone battery charging and has a multilingual user interface. The M6DAC has a built-in 200W power supply that allows it to be powered from a 100~240V AC mains power source. It also has the ability to operate on a 7~28V DC power supply which is perfect for charging at the flying field, race track, or boating lake.

The ToolkitRC M6DAC is a versatile dual battery charger that integrates functions such as charging, synchronous charging, discharging, cycling, smart consumer-grade drone battery charging and has a multilingual user interface. The M6DAC has a built-in 200W power supply that allows it to be powered from a 100~240V AC mains power source. It also can operate on a 7~28V DC power supply which is perfect for charging at the flying field, race track, or boating lake.

The ToolkitRC M7AC is a versatile, multifunction tool that integrates functions such as charging, discharging, cycling, signal test/signal source (PWM/PPM/SBUS), multimeter, smart consumer-grade drone battery charging, customizable multi-language voice alerts, and so much more. The M7AC is lightweight and compact, and it has a built-in power supply so that it can operate from a 100~240V AC mains power source. It also has the ability to operate on a 7~28V DC power supply which is perfect for charging at the flying field, race track, or boating lake.

The ToolkitRC M7AC is a versatile, multifunction tool that integrates functions such as charging, discharging, cycling, signal test/signal source (PWM/PPM/SBUS), multimeter, smart consumer-grade drone battery charging, customizable multi-language voice alerts, and so much more. The M7AC is lightweight and compact, and it has a built-in power supply so that it can operate from a 100~240V AC mains power source. It also has the ability to operate on a 7~28V DC power supply which is perfect for charging at the flying field, race track, or boating lake.

De Turnigy Quad 4x6S kan vier accu's tegelijk opladen! De pakketten kunnen van verschillende typen zijn, zoals Lilo, LiPo, LiFe, LIHV, NiMH, NiCd en Pb. Een kwalitatief ontworpen oplader met nauwkeurige balans en een vertrouwd, intuïtief menusysteem.

De Turnigy Quad 4x6 is uitgerust met 4 zeer nauwkeurige microprocessors om elke batterij afzonderlijk op te laden. Het efficiënte koelsysteem zorgt voor een veilige werking tijdens de laadcyclus. Alle poorten werken onafhankelijk van elkaar om u een enorme veelzijdigheid te bieden. Er is de mogelijkheid om een ​​LiPo-pack op poort-1 te balanceren terwijl je een LiFePo4- of NiMH-batterij in serie oplaadt op poort-2 of nog veel meer combinaties.

The latest version of the popular IMAX B6AC has arrived and now boasts some unique new features. The latest V2 Model now offers PC connectivity which allows the user to control the charger via your home computer and upgrade the firmware as and when necessary.

Turnigy has moved into the the next decade of the 21st century with the T240 touch screen charger. It has the ability to charge Lipo/Lilo/LiFe/LiHV/NiMH/NiCd and lead acid batteries as well as having battery management, security settings and operation data memory.

De Turnigy Reaktor-serie laders heeft een nieuw hoogtepunt bereikt met de D6 Pro Duo-lader, het heeft alle gebruikelijke functies die u van de Reaktor-serie mag verwachten, maar het heeft ook de mogelijkheid om uw smartphone en soortgelijke apparaten draadloos op te laden.

The Turnigy Reaktor series of chargers has reached a new high with the D6 Pro Duo charger, it has all the usual features you have come to expect from the Reaktor series but it also has the capability of charging your smartphone and similar devices wirelessly.