Accu's Opladers

Turnigy LiPo battery packs are well known for delivering excellent performance and durability in your favorite RC cars, and trucks. The Turnigy Rapid range continues this pedigree by using cutting-edge technology to achieve even better performance, greater cycle life, and lower internal resistance. These packs are capable of delivering an incredible discharge rate of 100C! Please note though that these packs have been specially designed for racing, and punch out of corners on a race track, etc, they are not suitable for the prolonged discharge rates that you require for airplanes.

Turnigy LiPo battery packs are well known for delivering excellent performance and durability in your favorite RC cars, and trucks. The Turnigy Rapid range continues this pedigree by using cutting-edge technology to achieve even better performance, greater cycle life, and lower internal resistance. These packs are capable of delivering an incredible discharge rate of 100C! Please note though that these packs have been specially designed for racing, and punch out of corners on a race track, etc, they are not suitable for the prolonged discharge rates that you require for airplanes.

The Turnigy BoltX series of high voltage lithium polymer batteries are here and ready to bring out the next level of power to your high-performance model. Turnigy Bolt batteries are built to the absolute highest standards to provide competition-level performance. With features such as gold-plated balance leads, silver-plated discharge wires, and a reformulated matrix to allow you to safely charge them up to 4.35 volts per cell! These batteries are simply unmatched by any other in performance and build quality!

More than just a fancy name. Turnigy nano-tech Lipoly batteries were designed from the ground up with serious performance in mind. Utilising an advanced LiCo nano-technology substrate that allows electrons to pass more freely from anode to cathode with less internal impedance. In short; less voltage sag and a higher discharge rates than a similar density lithium polymer (non nano-tech) batteries.

The Turnigy BoltX series of high voltage lithium polymer batteries are here and ready to bring out the next level of power to your high-performance model. Turnigy Bolt batteries are built to the absolute highest standards to provide competition-level performance. With features such as gold-plated balance leads, silver-plated discharge wires, and a reformulated matrix to allow you to safely charge them up to 4.35 volts per cell! These batteries are simply unmatched by any other in performance and build quality!

Turnigy Nano-Tech has always been a leader of the pack. Now they are even better as the Nano-Tech Plus. The Plus batteries have been designed for those that want acute discharge from their batteries for leading performance with extra punch.

The Turnigy BoltX series of high voltage lithium polymer batteries are here and ready to bring out the next level of power to your high-performance model. Turnigy Bolt batteries are built to the absolute highest standards to provide competition-level performance. With features such as gold-plated balance leads, silver-plated discharge wires, and a reformulated matrix to allow you to safely charge them up to 4.35 volts per cell! These batteries are simply unmatched by any other in performance and build quality!

The Turnigy BoltX series of high voltage lithium polymer batteries are here and ready to bring out the next level of power to your high-performance model. Turnigy Bolt batteries are built to the absolute highest standards to provide competition-level performance. With features such as gold-plated balance leads, silver-plated discharge wires, and a reformulated matrix to allow you to safely charge them up to 4.35 volts per cell! These batteries are simply unmatched by any other in performance and build quality!

The ToolkitRC Q6AC is a 4-channel (Quad) smart charger that will independently charge/discharge 4 batteries at the same time. The Q6AC has a built-in 400W power supply that allows it to be powered from a 100~240V AC mains power source. It also can operate on a 7~30V DC external power source of up to 1000W (input connection XT90) which is perfect for extreme fast charging at the flying field, race track, or boating lake. Another feature of the Q6AC is a built-in wireless charging system, so say goodbye to tangled wires. This system supports devices with the ability to wireless charge such as mobile phones, etc at up to a charge rate of 15W.

The ToolkitRC Q6AC is a 4-channel (Quad) smart charger that will independently charge/discharge 4 batteries at the same time. The Q6AC has a built-in 400W power supply that allows it to be powered from a 100~240V AC mains power source. It also can operate on a 7~30V DC external power source of up to 1000W (input connection XT90) which is perfect for extreme fast charging at the flying field, race track, or boating lake. Another feature of the Q6AC is a built-in wireless charging system, so say goodbye to tangled wires. This system supports devices with the ability to wireless charge such as mobile phones, etc at up to a charge rate of 15W.

Turnigy 16000mAh 4S 14.8V 20C LiPo battery with XT90 connector, aluminum protection board, and 10AWG silicone wire. 4S1P configuration delivers massive, extended runtime for large-scale RC vehicles, drones, and industrial applications. Select models available with QS8 connector.

HobbyKing has pushed the boundaries of RC power—from the legendary Blue series to the durable, low-IR of Graphene, and the relentless, hard-hitting delivery of the Rapid.

Now, it’s time to ascend to the absolute peak of RC performance. Welcome to APEX.

Engineered specifically for the brutal demands of modern FPV drone racing, freestyle, and high-speed RC flight, the APEX series introduces a boxy, near-square cell architecture. Designed to sit perfectly under FPV frames or aircraft fuselages, APEX optimizes your center of gravity while maximizing power density.

At the heart of APEX is a pure Cobalt formulation paired with Z-Fold structure. This eliminates the internal resistance bottlenecks found in traditional rolled cells, delivering 180C discharge rate. The APEX maintain rock-solid voltage stability when you punch the throttle hard.

Available in versatile capacities from 1100mAh to 4000mAh and configurations spanning 4S to 8S, APEX is the definitive power source for pilots who refuse to compromise.

HobbyKing Turnigy Graphene Panther 4S 100C lipo battery features ultra-low resistance and stable discharge across 5–52°C. Built for long cycle life, it minimizes voltage sag for drones and EDF jets, a top pick among rc batteries.

The Turnigy Graphene 1500mAh 2S 7.4V 100C LiPo Battery delivers high-discharge power, low internal resistance and stable output for demanding 2S RC applications. Its compact design and T plug make it ideal for compatible RC cars, planes, helicopters and other lightweight models.

More than just a fancy name. Turnigy nano-tech Lipoly batteries were designed from the ground up with serious performance in mind. Utilising an advanced LiCo nano-technology substrate that allows electrons to pass more freely from anode to cathode with less internal impedance. In short; less voltage sag and a higher discharge rates than a similar density lithium polymer (non nano-tech) batteries.

HobbyKing Turnigy Graphene 6S 100C lipo battery features ultra-low resistance and stable discharge across 5–52°C. Built for long cycle life, it minimizes voltage sag for drones and EDF jets, a top pick among rc batteries.

Als het gaat om het zetten rondes neer bereik, niemand wil compromis over de vuurkracht! dat is de reden waarom de legendarische Turnigy nano-tech accu's zijn nu beschikbaar voor Airsoft combat. Hogere motortoerental, minder spanning sag en uitgebreid bedrijfstijden gelijk betere prestaties van je wapen van keuze.

De nano-tech Airsoft serie beschikken ook over 5C lading ratings brengen je terug in de frontlinie sneller!

Krijg een oneerlijk voordeel en zorg ervoor dat je tegenstanders weten dat ze werden uitgevoerd door nano-tech hebben genomen!

Spec.
Capaciteit: 1200mAh
Voltage: 3s1p / 3S Cell / 11.1V
Ontlading: 15C Constant / 25C Burst
Gewicht: 99g (met inbegrip van draad, plug & geval)
Afmetingen: 125x6x21mm (per stuk)
Balance Plug: JST-XH
Kwijting Plug: Mini-Tamiya (Mini Molex)

De nano-kerntechnologie lithium ion batterijen is de toepassing van nanometer geleidende additieven.

1) De nanometer geleidende additieven vormen ultrasterke elektronen geleidend netwerk in de electroden waarop elektronische geleidbaarheid te verhogen.
2) Deze toevoegingen zorgen voor een supersterke mogelijkheid voor de imbibitie in de dragervloeistof om meer ionkanalen te leveren. Dit verbetert het vermogen van ionen transmissie en ionendiffusie.
Door het verbeteren van de elektronische geleidbaarheid en ion transmissie, wordt de impedantie verminderd en de polarisatie van een hoog percentage ontlading daalt sterk.

Voordelen ten opzichte van traditionele batterijen Lipo:
-Power Dichtheid bereikt 7,5 kw / kg.
-Minder Voltage sag in hoog tempo ontlading, waardoor meer vermogen onder belasting.
Intern impedantie zo laag als 1.2mΩ bereiken vergeleken met die van een standaard 3mΩ LiPoly.
-Meer Thermische controle, pak doesnt meestal overschrijden 60degC
-Dikte Zwelling tijdens zware belasting is momenteel niet meer dan 5%, vergeleken met 15% van een normale LiPoly tijdens zware belasting.
-Hogere Capaciteit tijdens zware ontlading. Meer dan 90% bij 100% C rate.
-Fast In staat rekening te brengen, tot 15C op sommige batterijen.
-Langere Cyclus leven, bijna het dubbele van die van standaard LiPoly technologie

* De lengte van saldo opladen draad kan variëren

The ToolkitRC Q6AC is a 4-channel (Quad) smart charger that will independently charge/discharge 4 batteries at the same time. The Q6AC has a built-in 400W power supply that allows it to be powered from a 100~240V AC mains power source. It also can operate on a 7~30V DC external power source of up to 1000W (input connection XT90) which is perfect for extreme fast charging at the flying field, race track, or boating lake. Another feature of the Q6AC is a built-in wireless charging system, so say goodbye to tangled wires. This system supports devices with the ability to wireless charge such as mobile phones, etc at up to a charge rate of 15W.

A replacement 7.4V 350mAh modular lithium battery for the RC ERA MBB BO-105 flybarless helicopter.

A replacement smart 7.4V 1200mAh modular lithium battery with an intelligent management system for the RC ERA MD500 range of flybarless helicopters.

Turnigy batteries are known the world over for performance, reliability and price. It’s no surprise to us that Turnigy Lipoly packs are the go-to pack for those in the know. Turnigy batteries deliver the full rated capacity at a price everyone can afford.  

Turnigy batteries are equipped with heavy duty discharge leads to minimise resistance and sustain high current loads. Turnigy batteries stand up to the punishing extremes of aerobatic flight and RC vehicles. Each pack is equipped with gold plated connectors and JST-XH style balance connectors. All Turnigy Lipoly batteries packs are assembled using IR matched cells.

You won’t find a better deal in Lipoly batteries anywhere!

Spec.
Minimum Capacity: 1500mAh
Configuration: 3S1P / 11.1v / 3Cell
Constant Discharge: 20C
Peak Discharge (10sec): 30C
Pack Weight: 133g
Pack Size: 102 x 34 x 20mm
Charge Plug: JST-XH
Discharge plug: XT60

The Ultra Power UP7 range of chargers uses the latest state-of-the-art technology, is very simple and intuitive to use, and is loaded with lots of features. Their ability to operate from either AC mains or a DC power source of 9~32V means they are extremely versatile, as they can be used at home or when out on the field to charge your batteries.

The UP7 can charge two batteries of different chemistry, and different voltages at the same time as it is two chargers in one unit. The LCD screen is split into two to show the information for each battery pack whilst being set up or charged/discharged. Both charging outputs can charge from 0.1~10A and can charge either 1~6S lithium-type cells (including LiHV), 1~16S NiMH/NiCd, or 1~12S Pb cells.

The Ultra Power UP7 range of chargers uses the latest state-of-the-art technology, is very simple and intuitive to use, and is loaded with lots of features. Their ability to operate from either AC mains or a DC power source of 9~32V means they are extremely versatile, as they can be used at home or when out on the field to charge your batteries.

The UP7 can charge two batteries of different chemistry, and different voltages at the same time as it is two chargers in one unit. The LCD screen is split into two to show the information for each battery pack whilst being set up or charged/discharged. Both charging outputs can charge from 0.1~10A and can charge either 1~6S lithium-type cells (including LiHV), 1~16S NiMH/NiCd, or 1~12S Pb cells.

The Ultra Power UP7 range of chargers uses the latest state-of-the-art technology, is very simple and intuitive to use, and is loaded with lots of features. Their ability to operate from either AC mains or a DC power source of 9~32V means they are extremely versatile, as they can be used at home or when out on the field to charge your batteries.

The UP7 can charge two batteries of different chemistry, and different voltages at the same time as it is two chargers in one unit. The LCD screen is split into two to show the information for each battery pack whilst being set up or charged/discharged. Both charging outputs can charge from 0.1~10A and can charge either 1~6S lithium-type cells (including LiHV), 1~16S NiMH/NiCd, or 1~12S Pb cells.

The Ultra Power UP7 range of chargers uses the latest state-of-the-art technology, is very simple and intuitive to use, and is loaded with lots of features. Their ability to operate from either AC mains or a DC power source of 9~32V means they are extremely versatile, as they can be used at home or when out on the field to charge your batteries.

The UP7 can charge two batteries of different chemistry, and different voltages at the same time as it is two chargers in one unit. The LCD screen is split into two to show the information for each battery pack whilst being set up or charged/discharged. Both charging outputs can charge from 0.1~10A and can charge either 1~6S lithium-type cells (including LiHV), 1~16S NiMH/NiCd, or 1~12S Pb cells.

The Ultra Power UP9 range of chargers uses the latest state-of-the-art technology, is very simple and intuitive to use, and is loaded with lots of features. Their ability to operate from either AC mains or a DC power source of 11~18V means they are extremely versatile, as they can be used at home or when out on the field to charge your batteries.

The UP9 can charge four batteries of the same type and voltage at the same time making it perfect if you use lots of the same batteries to power your models. The large easy-to-read LCD screen shows the information for the battery pack whilst they are being set up, then shows real-time data when the packs are being charged. The charging outputs can simultaneously charge from 0.1~5A up to a max of 50W per port and can charge either 1~6S lithium-type cells (including LiHV), 1~16S NiMH/NiCd, or 1~12S Pb cells.

The Ultra Power UP9 range of chargers uses the latest state-of-the-art technology, is very simple and intuitive to use, and is loaded with lots of features. Their ability to operate from either AC mains or a DC power source of 11~18V means they are extremely versatile, as they can be used at home or when out on the field to charge your batteries.

The UP9 can charge four batteries of the same type and voltage at the same time making it perfect if you use lots of the same batteries to power your models. The large easy-to-read LCD screen shows the information for the battery packs whilst they are being set up, then shows real-time data when the packs are being charged. The charging outputs can simultaneously charge from 0.1~5A up to a max of 50W per port and can charge either 1~6S lithium-type cells (including LiHV), 1~16S NiMH/NiCd, or 1~12S Pb cells.