Accu's Opladers

Dit Turnigy balans lader is eenvoudig te gebruiken, betrouwbaar en veilig voor elke modeler. Het beschikt over een slimme heffing bescherming om de accu's te zorgen, worden niet overladen en heeft real-time monitoring van het verhogen van de levensduur van uw accu's. Het kan worden gevoed via de 12V-uitgang en kosten bij 800mA. Het laden is via de JST-XH balans voorsprong op uw compatibele batterij. Geschikt voor alle Turnigy, Zippy en de meeste andere typen batterijen. U kunt gemakkelijk een aantal van deze laders aansluiten op dezelfde voeding aan meerdere's op te laden in een keer.

Kenmerken:
• Smart laden bescherming
• 2 ~ 3S Compatible
• Kosten door de balans leiding
• Eenvoudig te gebruiken, veilig en betrouwbaar
• Inclusief voedingskabel met Croc Clips

specs:
Input Voltage: 11 ~ 14V
Output Voltage: 8.4 ~ 12.6V DC
Output Current: 800mA (Max)
Afmetingen: 74x50x25mm
Gewicht: 46g

The Ultra Power UP7 range of chargers uses the latest state-of-the-art technology, is very simple and intuitive to use, and is loaded with lots of features. Their ability to operate from either AC mains or a DC power source of 9~32V means they are extremely versatile, as they can be used at home or when out on the field to charge your batteries.

The UP7 can charge two batteries of different chemistry, and different voltages at the same time as it is two chargers in one unit. The LCD screen is split into two to show the information for each battery pack whilst being set up or charged/discharged. Both charging outputs can charge from 0.1~10A and can charge either 1~6S lithium-type cells (including LiHV), 1~16S NiMH/NiCd, or 1~12S Pb cells.

The Ultra Power UP7 range of chargers uses the latest state-of-the-art technology, is very simple and intuitive to use, and is loaded with lots of features. Their ability to operate from either AC mains or a DC power source of 9~32V means they are extremely versatile, as they can be used at home or when out on the field to charge your batteries.

The UP7 can charge two batteries of different chemistry, and different voltages at the same time as it is two chargers in one unit. The LCD screen is split into two to show the information for each battery pack whilst being set up or charged/discharged. Both charging outputs can charge from 0.1~10A and can charge either 1~6S lithium-type cells (including LiHV), 1~16S NiMH/NiCd, or 1~12S Pb cells.

The Ultra Power UP7 range of chargers uses the latest state-of-the-art technology, is very simple and intuitive to use, and is loaded with lots of features. Their ability to operate from either AC mains or a DC power source of 9~32V means they are extremely versatile, as they can be used at home or when out on the field to charge your batteries.

The UP7 can charge two batteries of different chemistry, and different voltages at the same time as it is two chargers in one unit. The LCD screen is split into two to show the information for each battery pack whilst being set up or charged/discharged. Both charging outputs can charge from 0.1~10A and can charge either 1~6S lithium-type cells (including LiHV), 1~16S NiMH/NiCd, or 1~12S Pb cells.

The Ultra Power UP7 range of chargers uses the latest state-of-the-art technology, is very simple and intuitive to use, and is loaded with lots of features. Their ability to operate from either AC mains or a DC power source of 9~32V means they are extremely versatile, as they can be used at home or when out on the field to charge your batteries.

The UP7 can charge two batteries of different chemistry, and different voltages at the same time as it is two chargers in one unit. The LCD screen is split into two to show the information for each battery pack whilst being set up or charged/discharged. Both charging outputs can charge from 0.1~10A and can charge either 1~6S lithium-type cells (including LiHV), 1~16S NiMH/NiCd, or 1~12S Pb cells.

The Ultra Power UP9 range of chargers uses the latest state-of-the-art technology, is very simple and intuitive to use, and is loaded with lots of features. Their ability to operate from either AC mains or a DC power source of 11~18V means they are extremely versatile, as they can be used at home or when out on the field to charge your batteries.

The UP9 can charge four batteries of the same type and voltage at the same time making it perfect if you use lots of the same batteries to power your models. The large easy-to-read LCD screen shows the information for the battery pack whilst they are being set up, then shows real-time data when the packs are being charged. The charging outputs can simultaneously charge from 0.1~5A up to a max of 50W per port and can charge either 1~6S lithium-type cells (including LiHV), 1~16S NiMH/NiCd, or 1~12S Pb cells.

The Ultra Power UP9 range of chargers uses the latest state-of-the-art technology, is very simple and intuitive to use, and is loaded with lots of features. Their ability to operate from either AC mains or a DC power source of 11~18V means they are extremely versatile, as they can be used at home or when out on the field to charge your batteries.

The UP9 can charge four batteries of the same type and voltage at the same time making it perfect if you use lots of the same batteries to power your models. The large easy-to-read LCD screen shows the information for the battery packs whilst they are being set up, then shows real-time data when the packs are being charged. The charging outputs can simultaneously charge from 0.1~5A up to a max of 50W per port and can charge either 1~6S lithium-type cells (including LiHV), 1~16S NiMH/NiCd, or 1~12S Pb cells.

The Ultra Power UP9 range of chargers uses the latest state-of-the-art technology, is very simple and intuitive to use, and is loaded with lots of features. Their ability to operate from either AC mains or a DC power source of 11~18V means they are extremely versatile, as they can be used at home or when out on the field to charge your batteries.

The UP9 can charge four batteries of the same type and voltage at the same time making it perfect if you use lots of the same batteries to power your models. The large easy-to-read LCD screen shows the information for the battery packs whilst they are being set up, then shows real-time data when the packs are being charged. The charging outputs can simultaneously charge from 0.1~5A up to a max of 50W per port and can charge either 1~6S lithium-type cells (including LiHV), 1~16S NiMH/NiCd, or 1~12S Pb cells.

The Ultra Power UP9 range of chargers uses the latest state-of-the-art technology, is very simple and intuitive to use, and is loaded with lots of features. Their ability to operate from either AC mains or a DC power source of 11~18V means they are extremely versatile, as they can be used at home or when out on the field to charge your batteries.

The UP9 can charge four batteries of the same type and voltage at the same time making it perfect if you use lots of the same batteries to power your models. The large easy-to-read LCD screen shows the information for the battery packs whilst they are being set up, then shows real-time data when the packs are being charged. The charging outputs can simultaneously charge from 0.1~5A up to a max of 50W per port and can charge either 1~6S lithium-type cells (including LiHV), 1~16S NiMH/NiCd, or 1~12S Pb cells.

The ToolkitRC M8D is a powerful, versatile, touch-screen unit that integrates functions such as charging, discharging, and balance management for a range of battery types. The M8D is also a dual charger, so it can charge 2 batteries at a time, and these can be different voltages and chemistries. The M8D is a DC unit only, so requires an input voltage of 10~49V DC, this makes it perfect for charging at the flying field, race track, or boating lake. For use in the workshop, it can also be connected to a suitable mains power supply.

The ToolkitRC M450 is a simple-to-use, no-nonsense, straightforward balance charger for LiPo, LiFe, and Li-ion batteries. It is an AC mains-powered charger only (100~240V), and can charge 2~4S battery packs at up to 5A, and a maximum of 50W.

Setting the type of battery, and the charge current is a simple affair using a single button (short press, and long press actions), and the intuitive, easy-to-read, wide angle, backlit, IPS 1.54" 240x240 pixel LCD screen. The 32-bit ARM processor provides high-precision charging management and gives a balance charge accuracy of <0.005V. Ports include an XT60 charging port, a 2~4S JST-XH balance port, and the standard AC input port.

The ToolkitRC M450 is a simple-to-use, no-nonsense, straightforward balance charger for LiPo, LiFe, and Li-ion batteries. It is an AC mains-powered charger only (100~240V), and can charge 2~4S battery packs at up to 5A, and a maximum of 50W.

Setting the type of battery, and the charge current is a simple affair using a single button (short press, and long press actions), and the intuitive, easy-to-read, wide angle, backlit, IPS 1.54" 240x240 pixel LCD screen. The 32-bit ARM processor provides high-precision charging management and gives a balance charge accuracy of <0.005V. Ports include an XT60 charging port, a 2~4S JST-XH balance port, and the standard AC input port.

The ToolkitRC M450 is a simple-to-use, no-nonsense, straightforward balance charger for LiPo, LiFe, and Li-ion batteries. It is an AC mains-powered charger only (100~240V), can charge 2~4S battery packs at up to 5A, and a maximum of 50W.

Setting the type of battery, and the charge current is a simple affair using a single button (short press, and long press actions), and the intuitive, easy-to-read, wide angle, backlit, IPS 1.54" 240x240 pixel LCD screen. The 32-bit ARM processor provides high-precision charging management and gives a balance charge accuracy of <0.005V. Ports include an XT60 charging port, a 2~4S JST-XH balance port, and the standard AC input port.

The ToolkitRC M450 is a simple-to-use, no-nonsense, straightforward balance charger for LiPo, LiFe, and Li-ion batteries. It is an AC mains-powered charger only (100~240V), can charge 2~4S battery packs at up to 5A, and a maximum of 50W.

Setting the type of battery, and the charge current is a simple affair using a single button (short press, and long press actions), and the intuitive, easy-to-read, wide angle, backlit, IPS 1.54" 240x240 pixel LCD screen. The 32-bit ARM processor provides high-precision charging management and gives a balance charge accuracy of <0.005V. Ports include an XT60 charging port, a 2~4S JST-XH balance port, and the standard AC input port.

ToolkitRC U3 Compact 2~3S USB Type C 25W 2A balance charger is an ultra-compact palm-size balance charger, that plugs into your favorite USB mains power supply. No fancy programming with this baby, just plug it into your USB adapter, connect your 2~3S LiPo battery balance lead, switch it on, and instantly it will start a balanced charge. The charge rate is set at 2A and the LED light will glow red when charging, then change to green when the charge is complete.

Features:
• A compact, fixed-rate charger for 2~3S LiPo batteries
• Utilizes any popular USB Type-C power adapter
• The perfect companion for charging items while traveling
• Simple LED light system denotes charging and standby

Specification: 

Model NO.: P6

Smart charging: The HOTA T8 charger and checker is equipped with intelligent features to ensure safe and efficient charging of your batteries.

Hota T6 battery charger is a small size charger designed for 1-6s LiHV/Life/Lilon/Lixx/Lipo batteries . It supports DC/PD input, with DC input charging powersoared to 300W, the maximum charging current can reach 15A. It is small, safe and reliable, great for the fpv racing drone batteries.

Specification:
Max Charge Capacity: DC 500W
Charge Current: 0.1A-20.0A
Max Discharge Capacity: 15W
Discharge Current: 0.1A-1.5A
Input Voltage: DC 10-34V
Ouput Voltage: DC 1-35

The ISDT BG-8S Smart Battery Checker is a new style of multipurpose battery checker. It is specifically designed for hobbyists of Remote Control products. It comes with lots of great features to help check your batteries, and receiver signals and even has a USB output that allows you to charge your phone or other devices. The Battery Checker has a 2.4” 320x240 display that can easily be seen in sunlight and has an easy-to-use menu system to show all functions and data.

De Turnigy Quad 4x6S kan vier accu's tegelijk opladen! De pakketten kunnen van verschillende typen zijn, zoals Lilo, LiPo, LiFe, LIHV, NiMH, NiCd en Pb. Een kwalitatief ontworpen oplader met nauwkeurige balans en een vertrouwd, intuïtief menusysteem.

De Turnigy Quad 4x6 is uitgerust met 4 zeer nauwkeurige microprocessors om elke batterij afzonderlijk op te laden. Het efficiënte koelsysteem zorgt voor een veilige werking tijdens de laadcyclus. Alle poorten werken onafhankelijk van elkaar om u een enorme veelzijdigheid te bieden. Er is de mogelijkheid om een ​​LiPo-pack op poort-1 te balanceren terwijl je een LiFePo4- of NiMH-batterij in serie oplaadt op poort-2 of nog veel meer combinaties.

The latest version of the popular IMAX B6AC has arrived and now boasts some unique new features. The latest V2 Model now offers PC connectivity which allows the user to control the charger via your home computer and upgrade the firmware as and when necessary.

The Turnigy E3 Compact LiPoly charger is a very simple to use the charger for 2S and 3S battery packs. No need for additional power supplies or 12v batteries as this little unit has its own built-in power supply that is quite happy on mains power from 100v to 240v (this particular unit comes with a UK plug and lead).

TURNIGY continues to lead the way in compact AC/DC battery chargers with the ACCUCELL C150 smart battery charger/balancer. It has the ability to charge Lipo/Lilo/LiFe/LiHV/NiMH/NiCd and lead acid batteries as well as having battery management systems, 20 charge/discharge memories, error protection amd much much more. Programming is extremely straightforward and intuitive with the simple to use touch buttons, easy to read LCD screen and easy to follow menu's.

TURNIGY continues to lead the way in compact AC/DC battery chargers with the ACCUCELL C150 smart battery charger/balancer. It has the ability to charge Lipo/Lilo/LiFe/LiHV/NiMH/NiCd and lead acid batteries as well as having battery management systems, 20 charge/discharge memories, error protection amd much much more. Programming is extremely straightforward and intuitive with the simple to use touch buttons, easy to read LCD screen and easy to follow menu's.

TURNIGY continues to lead the way in compact AC/DC battery chargers with the ACCUCELL C150 smart battery charger/balancer. It has the ability to charge Lipo/Lilo/LiFe/LiHV/NiMH/NiCd and lead acid batteries as well as having battery management systems, 20 charge/discharge memories, error protection amd much much more. Programming is extremely straightforward and intuitive with the simple to use touch buttons, easy to read LCD screen and easy to follow menu's.

Turnigy has moved into the the next decade of the 21st century with the T240 touch screen charger. It has the ability to charge Lipo/Lilo/LiFe/LiHV/NiMH/NiCd and lead acid batteries as well as having battery management, security settings and operation data memory.

Turnigy has moved into the the next decade of the 21st century with the T240 touch screen charger. It has the ability to charge Lipo/Lilo/LiFe/LiHV/NiMH/NiCd and lead acid batteries as well as having battery management, security settings and operation data memory.

Turnigy has moved into the the next decade of the 21st century with the T240 touch screen charger. It has the ability to charge Lipo/Lilo/LiFe/LiHV/NiMH/NiCd and lead acid batteries as well as having battery management, security settings and operation data memory.

De Turnigy Reaktor-serie laders heeft een nieuw hoogtepunt bereikt met de D6 Pro Duo-lader, het heeft alle gebruikelijke functies die u van de Reaktor-serie mag verwachten, maar het heeft ook de mogelijkheid om uw smartphone en soortgelijke apparaten draadloos op te laden.

The Turnigy Reaktor series of chargers has reached a new high with the D6 Pro Duo charger, it has all the usual features you have come to expect from the Reaktor series but it also has the capability of charging your smartphone and similar devices wirelessly.

Het HOTA-assortiment laders/ontladers wordt snel bekend om hun kwaliteit, betrouwbaarheid en tal van geweldige functies. Deze verbazingwekkende dubbele oplader/ontlader kan tot 2 x 300W opladen in een klein pakketje van 111 x 70 x 45mm en met een gewicht van slechts 292 g. Het biedt tal van bescherming om zichzelf of uw accu's te beschermen tegen beschadiging, zoals temperatuurbeveiliging, capaciteitsbeveiliging, invoer- en uitvoeromkeringsbeveiliging, kortsluitingsbeveiliging en nog veel meer. Zie de bijgevoegde gebruikershandleiding voor de volledige lijst met functies en beveiligingen.

The ISDT Q8 packs a real punch, with the ability to charge 8 LiPo, LiIon, or LiFe cells, and 7 LiHv cells at up to a staggering 30A (1000W max). It features an up-to-date touch screen that accesses an innovative, and intuitive interface, which enables the user to reach all the advanced charging/discharging features with ease. This allows for fast, and easy programming and is perfect for novices and experts alike. The screen also gives an outstanding picture quality via its 2.4" IPS LCD screen, this also has a viewing angle of up to 178°.