Uitverkoopgebied

Zender Neck Strap-adapter (Rood)

Het verbeteren van de stabiliteit van uw 2.4GHz zender met een van deze CNC geanodiseerd aluminium draagriem adapters. 2 types van adapters worden geleverd plus schroeven, die past in de meeste radio's.

Learn More

Zender Neck Strap-adapter (Silver)

Het verbeteren van de stabiliteit van uw 2.4GHz zender met een van deze CNC geanodiseerd aluminium draagriem adapters. 2 types van adapters worden geleverd plus schroeven, die past in de meeste radio's.

Learn More

Zender Neck Strap-adapter (Gunmetal Black)

Het verbeteren van de stabiliteit van uw 2.4GHz zender met een van deze CNC geanodiseerd aluminium draagriem adapters. 2 types van adapters worden geleverd plus schroeven, die past in de meeste radio's.

Learn More

Verhoog je RC signaal geldigheid en verminderen uw kans op signaalverlies in koolstofvezel en / of 3D casco's als lange reeks FPV platforms met behulp van de OrangeRX DSMx / DSM2 compatibele 6-kanaals Diversity Module.

De OrangeRX DSM2 / DSMx Compatible 6 Channel Diversiteit Module zullen de gegevens ontvangen van maximaal 6 satellietontvangers, controleert het signaal geldigheid en vervolgens voert het geldig signaal aan een satelliet-interface ingeschakeld DSM2 / DSMx compatiblereceiver of via een directe verbinding met een UAV of Flybarless Helikoptervlucht controller.

Het toestel kan worden gevoed via een externe 5V ~ 8.4V of rechtstreeks vanaf de 3.3V satelliet-poort en bevat een bindende functie waarmee satellieten gebonden te zijn zonder gebruik van een extra ontvanger.

Kenmerken:
• Zes satelliet-poorten
• Gevoed door Rx satelliet-poort of externe stroomaansluiting
• Rx satelliet-poort kan worden gebruikt om het apparaat en de aangesloten satellieten macht
• Dip switch selecteerbare modi
• LED-indicatie laat zien welke satelliet is actief

spec:
Operating Modes: DSM2 (1024 / 22ms, 2048 / 11ms), DSMx (22ms / 11ms)
Voeding: Externe 5V ~ 8.4V of 3.3V via sateliet-poort

Learn More

9171000871-0 Learn More

9171000873-0 Learn More

De OrangeRx 6ch compacte ontvanger is ontworpen voor FPV-racedrones met carbonframes. Met de extra lange antenne kunt u ze buiten het frame routeren voor een groter bereik en een robuuste verbinding met uw zender.

Learn More

9114000060-0 Learn More

9114000063-0 Learn More

Easy to use, simply follow the links on the FrSKY website, connect the receiver to the STK and plug the STK into your computer via the USB port. The FrSKY STK updates all FrSKY receivers that support S.Port.

Learn More

The Turnigy X6B is a 6-channel two-way receiver designed for multi-rotor aircraft. It uses the 2.4GHz AFHDS 2A (Automatic Frequency Hopping Digital System) protocol and has a dual omnidirectional antenna with superior noise reduction techniques for reliable interference-free operation. It’s compact, easy to install, and boasts a rich easy-to-use interface. The X6B supports 6-channel PWM output, standard PPM output, and i-BUS support for up to 18 channels alongside a reliable voltage sensor interface. This is an excellent addition to your Turnigy TGY-i6s, TGY-i10, and Evolution transmitters as well as a number of other AFHDS 2A transmitters such as FS-i10, FS-i8, FS-i6, FS-i6S, FS-i6X, FS-i4, and FS-i4X. An excellent receiver for multi-rotor drones as it is lightweight cuts down on cabling and comes with built-in battery monitoring.

Learn More

This receiver was specifically designed by OrangeRx with the FPV racer in mind. Although it is small and ultra-lightweight it has true diversity technology which is especially important for the harsh environment of FPV racing. These racing conditions are far from ideal, low altitude, lots of obstacles, motors, and video transmissions in close quarters, situations where you need a robust reception.

Learn More

This handy programming box for the OrangeRx R620X to R1220X V3 and RR12RDTS receivers is perfect to have in your toolbox at the flying field in case you want to change the settings without the need for a PC. It has an integrated RF module that allows you to set up the receiver wirelessly or you can use a wired connection. As the RR12RDTS is primarily designed for drones and helicopters this programming box can also be used to adjust the settings of the flight stabilization systems.

Learn More

FrSky M7-R hall sensor gimbal is specially designed for FPV racing, 3D and acrobatic fixed wing and 3D Heli pilots who are using the FrSky Taranis Q X7/X7S Transmitter. The 45°throttle travel will allow you to achieve a quick throttle response resulting in precision control.

Learn More

After the huge success of the Turnigy Evolution, the engineers at Turnigy listened to customer feedback, went back to the drawing board, and came up with the exciting Turnigy Evolution PRO. As with the Evolution, the Evolution PRO is designed with the drone flier in mind and is still amazingly compact for easy backpack transportation.

Learn More

Designed to be splash-proof, the HK-GT2 receiver is a great choice for boats, cars on muddy terrain and rainy days. Stop changing receivers from model to model and get an extra receiver now.

Learn More

This kit comes complete with the FrSky Taranis X-Lite BRACE. There are also red replacement gimbal stick ends in two sizes, short and long, depending on your needs.

Learn More

Als je je zorgen maakt over krassen op het scherm van de Evolution PRO's of beschadiging van een stuurknuppel tijdens het transport, dan voldoet deze hoes aan al je eisen. Hij klikt eenvoudig op de voorkant van je controller om het scherm veilig te bewaken en blijft plakken. Het komt in zwart of wit.

Learn More

Als je je zorgen maakt over krassen op het scherm van de Evolution PRO's of beschadiging van een stuurknuppel tijdens het transport, dan voldoet deze hoes aan al je eisen. Hij klikt eenvoudig op de voorkant van je controller om het scherm veilig te bewaken en blijft plakken. Het komt in zwart of wit.

Learn More

High gain, high sensitivity RF components are used throughout, this coupled with FLYSKY's latest generation intelligent wireless 2.4GHz AFHDS 3 protocol, enables the receiver to reject interference easily, while maintaining high reception rates, and stable performance. This version 2 FGr4 supports PPM, i-BUS, and 4 PWM data outputs (CH1~CH4), and an input for connecting additional sensors. Another feature of this quality FLYSKY receiver is the ability to handle a wide input voltage, anything from 3.5-12V can be used, and the case has a sealing gasket which makes it water-resistant.

Learn More

The FGr8B surface micro receiver adopts FLYSKY's third-generation automatic frequency hopping digital system (AFHDS 3), it is perfectly suited to their range of PL18, NB4, and NB4 Lite transmitters. It uses a single antenna bidirectional transmission system that is uniquely designed to install and output PWM/PPM, and iBUS in signals.

Learn More

The FTM302 adopts FLYSKY's third-generation automatic frequency hopping digital system, AFHDS 3. It uses a single antenna, a bidirectional transmission system in a compact design with support for multiple signal inputs. Supports external power and is compatible with standard JR-type module bays.

The FTM302 offers a long range of up to 3.5km + on the EU default setting of 20dBm (changeable through the management system), low latency, less than 10ms, and allows for online updates and managing the module via the FLYSKY Remote Control Assistant. Power to the module can either be internal, or an external power source of 5~28V can be connected via the built-in XT30 connector. The module also has a built-in fan which automatically turns on if the temperature reaches 45°C to ensure the system remains safe, this can happen when the module is being used with higher voltages.

Learn More

The RADIOMASTER TX12 is a compact, low-cost, OpenTx radio that has many great features. Being compact, it is about two-thirds the size of a traditional transmitter, has a removable antenna, and a folding carry handle, which makes it the perfect option for traveling. Despite its smaller size, it is comfortable to hold due to its well-designed case and improved ergonomic hand grips. This MKII version with upgraded STM32F407 MTU has the cutting-edge EDGETX software pre-installed. This open-source firmware is highly customizable to allow users to configure their transmitters through the supplied USB-C data port to adjust the settings for their individual preferences and specific needs. EdgeTX supports a wide range of RC protocols and is a versatile and powerful tool which makes it extremely popular with the RC community. RADIOMASTER works closely with the EdgeTX team to develop and optimize the user experience and will continue to ensure that the concept and standards are carried forward into the future. Learn More

The RadioMaster RP V2 series of receivers now have a built-in TCXO (Temperature-Compensated Xtal Oscillator). The TCXO ensures high stability and accuracy in frequency control and compensates for temperature variations. This results in consistent and reliable signal reception, even in extreme temperature conditions. It also reduces frequency drift over time, providing long-term frequency stability and preventing signal degradation. This provides a superior performance in demanding environments and enhances the flight experiences.

The RP2 2.4GHz ELRS Nano receivers use the high-performance, revolutionary ExpressLRS open-source system. The Nano receivers were designed by the ExpressLRS development team, and feature the ESP8285 MCU and SX1280 RF chips. WiFi is built-in so that you can easily upgrade the firmware and configure the receiver using your PC or mobile phone. Other features of the RP2 V2 are improved solder pads and a super lightweight built-in ceramic antenna.

Learn More

The RP3 2.4GHz ELRS Nano receivers use the high-performance, revolutionary ExpressLRS open-source system. The ExpressLRS development team designed the Nano receivers, which feature the ESP8285 MCU and SX1280 RF chips. This offers Lora and FLRC 2.4GHz RF links for incredible range and low latency. WiFi is built-in to easily upgrade the firmware and configure the receiver using your PC or mobile phone.

The receiver features a Skyworks SE2431L providing an LNA for improved receiver performance, a PA providing up to 100mW of telemetry performance, and antenna switching for antenna diversity.. The RP3 Nano receiver is available in either an FCC or a European LBT version, please check the specifications below for the supported protocol.

Learn More

A strong, well-made neck strap that suits a multitude of transmitters including the FrSky X14 series and many, many more. It includes the Turnigy logo, a quick-release connector, and a sliding, clasp to hook onto the transmitter neck strap attachment.

Learn More