Uitverkoopgebied

Spinner voor het vouwen van Prop (Small)
Collet stijl, past 2.3 ~ 2.5mm motorassen
Prop as bout is 5mm
Hiervoor is een propeller aan 5mm assen aan te passen.
Gewicht: 9g
Diameter: 31mm

Zeer goed gevormd, licht van gewicht en stevig, schuim wielen.

Control Arms 43x13x24x3mm (5pcs / bag)

These are a pair of replacement landing gear with doors and wheels for the H-King P-51D Moonbeam McSwine 750mm (30").

(Suits Versions 1 & 2)

HobbyKing Bixler 2 EPO 1500mm - Replacement Wing Spar

30mm JR Male/Male 26AWG Servo Lead.

Specs:
Connectors: 2 x male JR type
Length: 30mm
Wire Gauge: 26AWG
Wire Insulation: PVC
Weight: 2g each
Quantity: 10pcs

A replacement vertical stabilizer with rudder and factory-applied decals for the AXN Floater-Jet. Please note that this spare part may have a different color scheme to your AXN Floater-Jet but that is the only difference.

A replacement set of decals for the AXN Floater-Jet.

The Tamiya battery/power connector has been with us for many years. They are still extremely popular being easy to fit, they make a good secure connection, and they can handle moderate currents.

Specs:
Gender: Female nylon housing with male pins
Weight: 2.3g each
Quantity: 10pcs

The Mini Tamiya battery/power connector has been with us for many years. They are still extremely popular for smaller models and are easy to fit, make a good secure connection, and can handle moderate currents.

Specs:
Gender: Male nylon housing with female sockets
Weight: 2g each
Quantity: 10pcs

The perfect solution to connect 2 batteries with 4mm HXT connectors in series.

These are the smallest connector in the EC series of connectors. They use 2mm gold plated pins and sockets will accept up to 16AWG wire and are rated at up to 20 amps. They are easy to fit, make a small neat connection with good contact. These are perfect for small drones and other small models.

Specs:
Gender: Male and Female
Weight: 2g each
Quantity: 5 male and 5 female w/pins and sockets

2.5mm PCB Mounted DC Power Socket (5pcs).

High gain, high sensitivity RF components are used throughout, this coupled with FLYSKY's latest generation intelligent wireless 2.4GHz AFHDS 3 protocol, enables the receiver to reject interference easily, while maintaining high reception rates, and stable performance. This version 2 FGr4 supports PPM, i-BUS, and 4 PWM data outputs (CH1~CH4), and an input for connecting additional sensors. Another feature of this quality FLYSKY receiver is the ability to handle a wide input voltage, anything from 3.5-12V can be used, and the case has a sealing gasket which makes it water-resistant.

Elke cel is met de hand geplukt en afgestemd op de ultieme kwaliteit om de kracht, duurzaamheid en looptijd te leveren die nodig zijn voor de hoogwaardige modellen van vandaag. Elke verpakking wordt in elke fase van de montage gecontroleerd en getest om de hoogst mogelijke kwaliteit te garanderen. Door dit zorgvuldige afstemmings- en controleproces kunnen de verpakkingen een verbijsterend ontladingspercentage tot 140 ° C bereiken. Als je de veeleisende racer of hardcore basher bent die elke druppel prestatie uit je batterijen moet persen, dan is dit het pakket voor jou!

Vervangende romp voor de Durafly Goblin Racer in geel / zwart / zilver.

Vervangend staartvlak en lift voor de Durafly Goblin Racer in geel / zwart / zilver.

Vervangende vin en roerconstructie voor de Durafly Goblin Racer in geel / zwart / zilver.

Vervangende zwarte spinner voor de Durafly Goblin Racer.

Replacement decal set for the Durafly Goblin Racer in Yellow/Black/Silver.

Replacement fuselage for the Durafly Goblin Racer in Pink/Blue/Black.

Replacement wing for the Durafly Goblin Racer in Pink/Blue/Black.

Replacement fin/rudder assembly for the Durafly Goblin Racer in Pink/Blue/Black.

This compact F3 Flight Controller includes a FrSky receiver unit and 4 integrated 20A ESCs. It utilizes the DShot 600 protocol (Betaflight compatible) to communicate between the flight controller and the ESCs, proven and tested sensors, and a next-generation CPU. This small, lightweight package delivers reliability and incredible flight performance.

Specs:
Input Voltage: 2-3S (they may handle 4S)
Receiver: FrSky compatible
ESC Protocol: DShot 600
ESC Output: 4 x 20A
Power Input Connector: JST
Dimensions: 20mmx20mm

H-King Avro Lancaster V3 "Dumbo" Replacement Main Wings w/Decals.

Please note: No motors, ESC's or servos are included, these are the foam parts only.

HydroPro Inception Brushless RTR Deep Vee Racing Boat Replacement Hatch Sealing Rubber Gasket (2pcs).

HydroPro Inception Brushless RTR Deep Vee Racing Boat Replacement Drive Shaft Support Set.

KingKong Multirotor Propeller 6x4 CW Black (10pcs)

Includes:
10 x 6040 Propellers (CW)

HydroPro Inception Brushless RTR Deep Vee Racing Boat Replacement CNC Aluminum Rudder Assembly w/Plastic Mounting Bracket.

HydroPro Inception Brushless RTR Deep Vee Racing Boat Replacement Stainless Steel Turn Fins w/Mounting Set.