Vliegtuigen

Durafly® ™ Tundra - Horizontal Tail / Elevator

The Avios Tundra series of STOL sports planes has enjoyed a massive following over the years, and rightfully so, as it has been one of the best flying RC foam planes ever designed. They have an impressive flight envelope with an amazing STOL performance, and all this is coupled with a great-looking plane. The original 1300mm Tundra was followed sometime later with the launch of the 1700mm Grand Tundra, which encompassed all your favorite features but on a larger scale. This was then followed by the Grand Tundra Plus version, which kept all the original features but had improved wing servo connectors to give a stronger and more reliable connection.

We now take yet another leap forward to the 1700mm Grand Tundra 2. Like all things that evolve, there are areas that, over time, could do with a slight improvement. So, after listening to our customers and pilots, and from our own experiences, the GT2 was born, and it is better than ever. It is now a 6S setup as standard, the tail wheel has been redesigned and strengthened, the main tundra wheels have pneumatic rubber tires, it has a removable plywood battery tray with spring-loaded latch (for quick battery changes), hex-head screws all round, and a new profile, more efficient glass-filled nylon 15x8 propeller. The look of the GT2 has also changed; it has a new, striking design in the popular green and silver color scheme.

Durafly® ™ Tundra - Foam Canopy / Batterij Hatch w / Magneet

Durafly® ™ Tundra - Rear Wheel Assembly

Durafly® ™ Tundra - Multiplex FPV Tray (Kit)

Durafly® ™ Tundra - Wing Strut Set

Durafly® ™ Tundra - Main Landing Gear Assembly

Durafly® ™ Tundra - Decal Set

Durafly® ™  Tundra - Main Wing Set w/Control Horns (Blue/Red)

Durafly® ™ Tundra - Foam Canopy / Battery Hatch w/Magnet (Purple/Gold)

Durafly® ™ Tundra - Foam Canopy / Battery Hatch w/Magnet (Blue/Red)

Durafly® ™ Tundra - Decal Set (Orange/Grey)

Durafly® ™ Tundra - Decal Set (Blue/Red)

"Leer op de toendra vliegen" met de Prime Tundra PT1200. Dit is weer een aanvulling op de razend populaire Tundra-serie van STOL (Short Take-Off and Landing) vliegtuigen van Durafly, maar deze is vooral, maar niet uitsluitend, op de beginner gericht. De PT1200 is de perfecte STOL-trainer voor diegenen die deze stijl van vliegen willen leren kennen, omdat hij de uitstekende STOL-vliegeigenschappen van de toendra-lijn heeft geërfd, het is ook erg leuk voor doorgewinterde toendra-fans!

After the incredible success of the Tundra V1 and V2, Durafly has decided to produce yet another version with even more improvements to bring the Tundra series bang up to date. The V3 is now a pure 4S set-up so it has power in abundance to make your flying even more fun than it was before (if that is at all possible!). Other changes and improvements include daylight bright LEDs (so bright they are suitable for true dawn-to-dusk flying), a reinforced nylon prop that is more efficient, and better balanced, a return to the classic EPO foam wheels which are lighter, and stronger, pre-installed pushrods, and hex-head bolts and screws throughout. The V3 is available in the classic Tundra green and white scheme, or a red and silver color scheme Durafly has called the "Inspire". The reason is that the original Tundra was "Inspired" by the "Highlander" full-size SuperStol experimental airplane.

The Dancing Wings Hobby Savage Bobber is a small, lightweight foam model that is quick and simple to build. The full-size Savage Bobber was devised by the Zlin Aviation Company. The Bobber as in the motorcycle world means that it is a stripped-down, customized version of an original. The Savage Bobber is a stripped-down, customized version of its older brother the Savage Classic. It is lighter, more maneuverable, and has a slightly narrower fuselage, and the absence of covering to the rear of the fuselage greatly improves the crosswind handling.

The model is reasonably straightforward to assemble, it is manufactured in pre-painted high-quality EPP foam sheet for the majority of the construction, tough plastic for the open framework rear fuselage, and lightweight balsa for the internal structure. Carbon strips are also included to reinforce and improve the stiffness of the structure. It builds up quickly into a good-looking, fun-to-fly lightweight (only 98g) sports plane that is perfect for indoor or park flying. This ARF kit is supplied with a powerful 1108-4000KV brushless motor, 5A brushless ESC, 5" propeller, and 4 x 2g servos.

De Tundra heeft zich stevig gevestigd in de RC-gemeenschap en is nu het favoriete elektrische RC-vliegtuigmodel geworden voor de meeste RC-piloten. Van gemiddelde piloten tot de meer ervaren vlieger, dit RC-vliegtuig kan het allemaal. De Tundra is een uiterst veelzijdig vliegtuig dat erg leuk is om te vliegen en zeer vermakelijk is voor alle piloten met zijn uitstekende aerobatische potentieel, STOL-vliegvermogen en allround taaiheid.

The Dancing Wings Hobby Cute Girl laser cut balsa kit captures the type of vintage model airplane that was used in the early days of RC with radio assist. It has that classic retro look, lots of wing dihedral, band on wings, a large cabin, classic shapes to the wings and empennage, and tail dragger landing gear, all the features required for a retro classic look.

The controls are just basic 3 channels, rudder, elevator, and motor control, this keeps things nice and simple. We recommend that you power the Cute Girl with a brushless motor set-up. However, a nitro or a diesel engine can be used for that even more authentic vintage look and classic soundtrack.

After the incredible success of the Tundra V1 and V2, Durafly has decided to produce yet another version with even more improvements to bring the Tundra series bang up to date. The V3 is now a pure 4S set-up so it has power in abundance to make your flying even more fun than it was before (if that is at all possible!). Other changes and improvements include daylight bright LEDs (so bright they are suitable for true dawn-to-dusk flying), a reinforced nylon prop that is more efficient, and better balanced, a return to the classic EPO foam wheels which are lighter, and stronger, pre-installed pushrods, and hex-head bolts and screws throughout. The V3 is available in the classic Tundra green and white scheme, or a red and silver color scheme Durafly has called the "Inspire". The reason is that the original Tundra was "Inspired" by the "Highlander" full-size SuperStol experimental airplane.

De Durafly Night Tundra treedt in de voetsporen van de populaire en gevestigde Tundra-serie. Je hoeft niet langer te stoppen met vliegen als de zon ondergaat, met het ongelooflijke, superheldere lichtsysteem op de Night Tundra kun je gewoon doorgaan tot in de schemering en verder. De Night Tundra behoudt de onbeperkte vliegeigenschappen van de originele Tundra. Of het nu gaat om ruige bushvelden, water, sneeuw of zand, aerobatics, zweefvliegen, snoep laten vallen (met optioneel onderdeel), of gewoon ouderwets super STOL langzaam vliegen, de Night Tundra neemt het allemaal op zich. met gemak. De lichtgewicht maar robuuste en mooi afgewerkte EPO-schuimconstructie, krachtige borstelloze set-up en perfect geharmoniseerd ontwerp geven je onmiddellijk een gevoel van vertrouwen op de sticks, net zo snel als een glimlach op je gezicht.

Toen Durafly de originele Auto-G uitbracht, legde het de lat hoger door de eerste Plug-N-Fly autogyro op de markt te zijn. Met de Auto-G2 V2 is die lat nog hoger gelegd. Volgens de Durafly traditie is hij snel en eenvoudig in elkaar te zetten, vliegt hij extreem goed en ziet hij er fantastisch uit tijdens de vlucht. De V2-upgrades omvatten de toevoeging van een duurzame 2mm met vezels versterkte nylon hoofdplaat, met vezels versterkte stoterstangen, een volledig ingekapselde hoofdmast, een breder, sterker landingsgestel met grote lichtgewicht bush-stijl schuimrubber wielen, een ingeschoven motor, plus kleinere interne elektronica waardoor er meer ruimte is voor de vluchtaccu.