Vliegtuigen

Deze H-King-versie van de klassieke F4U Corsair-oorlogsvogel is vervaardigd in een prachtig afgewerkt EPO-schuim in een authentiek marinekleurenschema met alle emblemen vooraf aangebracht. De Corsair is op zichzelf al een zeer stabiele vlieger, voor de meeste piloten is de gyro niet nodig. Voor beginners en low-hours piloten wordt echter een 6-assig ORX-vluchtstabilisatiesysteem meegeleverd waardoor het nog gemakkelijker wordt om te vliegen. Het stabilisatiesysteem maakt gebruik van een 32-bits MCU en een 6-assige digitale gyro voor ultrasnelle bedieningsrespons, het kan worden omgeschakeld van beginners- naar expertmodus naarmate uw ervaring groeit.

H-King Avro Lancaster V3 "Dumbo" Replacement Fuselage w/Decals & Tailwheel.

Note: These replacement parts are predominantly for the Lancaster V3 due to the color scheme, however, they will also fit versions 1 and 2.

H-King Avro Lancaster V3 "Dumbo" Replacement Main Wings w/Decals.

Please note: No motors, ESC's or servos are included, these are the foam parts only.

H-King Avro Lancaster V3 "Dumbo" Replacement Horizontal Stabilizer w/Elevators.

Note: These replacement parts are predominantly for the Lancaster V3 due to the color scheme, however, they will also fit versions 1 and 2.

H-King Avro Lancaster V3 "Dumbo" Replacement Vertical Stabilizers.

Note: These replacement parts are predominantly for the Lancaster V3 due to the color scheme, however, they will also fit versions 1 and 2.

H-King Avro Lancaster V3 "Dumbo" Replacement Nose Dome (Bomb Aimers Dome) and Gun Turret Set.

Note: These replacement parts are predominantly for the Lancaster V3 due to the color scheme, however, they will also fit versions 1 and 2.

These optional servoless electric retracts have been designed for the H-King Avro Lancaster and include scale looking wheels, they are suitable for versions 1, 2, and 3.

The subject of this kit is the German liaison aircraft built during WW11, the Fieseler Fi 156 Storch. The Storch (German for "Stork") is famous for its STOL (Short Take-Off and Landing) abilities and it had an incredibly low stall speed of only 31mph. It was mainly used during WW11 for reconnaissance, spotting for the army and forward operations, and medical evacuation. Its design incorporated hinged slats along the entire length of the wings leading edge and a hinged and slotted set of control surfaces ran along each trailing edge, this was split equally to form outboard ailerons and inboard flaps. Virtually nothing about the Storch is streamlined with bits sticking out everywhere including the side windows,  this with its long undercarriage hanging down gives it a unique long-legged bird look which is why it was given the name of "Storch".

A replacement pre-painted fuselage for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

A replacement upper and lower pre-painted main wing set with ailerons, horns, and cabane strut fixings for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

A replacement pre-painted horizontal stabilizer with elevator, carbon joining spar, and bracing wire fixings for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

A replacement pre-painted battery hatch with canopy for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

A replacement scale spinner with backplate for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

A replacement pre-painted motor cowl with a detailed dummy engine for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

A replacement set of inter-plane, and cabane struts for the Durafly Gloster Gladiator Mk1 Biplane Fighter (6 pieces).

A replacement main landing gear set with fairings for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

A replacement pair of scale main landing wheels with hubs and fixing screws for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

A replacement tail wheel assembly with wheel for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

A replacement 3719-770KV brushless motor with prop adapter and X-Mount for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

A replacement prop adapter for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

A replacement accessory pack that includes pushrods, pushrod keepers, and screws for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

A replacement scale detailing pack that includes dummy exhausts, machine guns, and air intake for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

A replacement decal set for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

A replacement rigging set that includes stranded flying wire and crimps for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

A set of 4 replacement propeller blades for the H-King 800mm Hawker Tempest.

A replacement 3 blade propeller assembly with hub and screws for the H-King 750mm Chance Vought F4U Corsair.

A replacement spinner assembly with insert for the H-King 750mm Chance Vought F4U Corsair.

De H-King P-51 "Galloping Ghost" is de eerste in een nieuwe mini-serie van H-King, de "Reno Aces", WO2-jagers gekleed om indruk te maken tijdens de luchtraces. De P-51 "Galloping Ghost" met de meegeleverde standaard 3108-1070KV borstelloze motor biedt een echt snel model direct uit de doos met snelheden van bijna 100mph bij gebruik van de aanbevolen 2200 mAh 4S LiPo. Als u echter een ervaren hand bent en op zoek bent naar snelheden van 100+ mph, dan is er de optionele drop-in fit 3108-1170KV "Pro" borstelloze motor. Dit geeft je fantastisch uitziende Reno Ace echt ballistische prestaties op dezelfde prop, ESC en 4S-batterij voor degenen die het extra rotatiekoppel bij de lancering aankunnen.

Een vervangende vleugelset voor de H-King Reno Aces P-51 "Galloping Ghost". Omvat de servo-afdekkingen van het rolroer, duwstangen en in de fabriek aangebrachte emblemen

A replacement fuselage set for the H-King Reno Aces P-51 "Galloping Ghost", includes factory-applied decals. Please note that the top decking, canopy, and cowl are not supplied with this fuselage set.

A replacement horizontal stabilizer with elevator for the H-King Reno Aces P-51 "Galloping Ghost".

A replacement cowl with factory-applied decals and mounting screws for the H-King Reno Aces P-51 "Galloping Ghost".

A replacement spinner with backplate for the H-King Reno Aces P-51 "Galloping Ghost".

Een vervangend luikdeksel met een gouden luifel voor de H-King Reno Aces P-51 "Galloping Ghost".

A replacement wing set with servo covers, and pushrods for the H-King Reno Aces Grumman F6F Hellcat "Little Nugget".