Vliegtuigen

The Dancing Wings Hobby Fokker Eindecker III is a scale model of the famous World War 1 monoplane fighter. The kit comes almost ready to fly and is constructed in balsa for a strong, lightweight, authentic structure. A lot of scale detail is supplied including, a dummy engine, scale wheels, and a dummy machine gun, plus a full accessory kit is also supplied which includes all the necessary hardware including scale rigging to complete the kit.

The Dancing Wings Hobby Shining is a large lightweight profile-style foam kit that is quick and simple to build. It has been designed to be the perfect introduction to 3D flying and will perform extreme 3D maneuvers such as waterfalls, harriers, knife-edge loops, rolling circles, and much more.

The model is very straightforward to assemble, it is manufactured in pre-painted high-quality EPP foam sheet for the majority of the construction so the parts count is quite low, and carbon strips are supplied for strengthening. It builds up quickly into a good-looking, fun-to-fly lightweight extreme sport 3D plane that is perfect for park flying and on playing fields. This ARF model is supplied with a powerful 2216-950KV brushless motor, 30A brushless ESC, 10" propeller, and 4 x 9g servos.

Introductie van onze EPP 3D MX2. Met een fantastisch ontwerp en lay-out, zal dit allemaal uit EPP 3D'er voldoen aan de meest gretige 3D-piloten!

Het is de romp is nog torsiestijve erg stijf licht met veel ruimte onder de lange top luik voor uw radio en macht systeem. De vleugel is een een stuk affaire met EPP constructie, een zeer nauwkeurige symmetrische vleugelprofiel met 2 extra langsliggers flex te minimaliseren en te verdraaien. De controle oppervlakken zijn iets anders - de lift, roer en rolroeren zijn voorzien van een 3-laags constructie (EVP-Depron-EVP) maakt voor stijve oppervlakken en NO flex bij extreme gooit! Snap rolls 'Snap' en controle reactie is onmiddellijk.

Het licht - toch stijf - casco voegt tot één grote vliegende 3D 'schuimig'. Watervallen, kiekendieven, vlakke spins, rollende cirkels dit model beschikt over de precisie om deze en andere moves die je kunt bedenken uit te voeren!

Montage van het casco in een snelle 10-15 minuten proces met de hulp van een beetje medium CA. De radio en macht systeem lay-outs zijn zeer eenvoudig, de lange top luik waardoor voor een gemakkelijke toegang.

Dit is een geweldig model voor de algemene park vliegen en hardcore 3D. Je zal moeilijk worden ingedrukt om dit model te breken, zal het harde klappen te nemen en gewoon blijven stuitert terug everytime!


Kenmerken:
• Sterke EPP materiaal, licht van gewicht en crash bestendig
• Stijve EPP / Depron samengestelde stuurvlakken
• Revolutionair ontwerp draagt ​​bij aan de structurele integriteit en de stijfheid van het casco
• Licht van gewicht zorgt voor een optimale vleugelbelasting
• Uitstekende aerobatic prestaties en 3D-wendbaarheid.
• Eenvoudig ontwerp zorgt voor een gemakkelijke toegang tot apparatuur en de installatie
• De opvallen kleurenschema geweldig voor oriëntatie


specs:
Spanwijdte: 955mm
Lengte: 945mm
Wing Gebied: 15.2dm2
Gewicht: 550g (zonder batterij)




vereist:
4-kanaals radio-systeem
2217 950-1100KV borstelloze outrunner
30amp ESC
3S 11.1V 1100-1300MAH Li-Po
10x4.7 / 11x4.7 propeller
4 x 9g servo

De H-King Crusader 30E is gebaseerd op het klassieke stickontwerp. Dit elektrische RC vliegtuig kan worden gevlogen door zowel beginners als experts. Het is gemaakt van lichtgewicht laag en balsa dat is geverfd met een hoog contrast kleurenschema. De Crusader zal opvallen op de grond en in de lucht bij je plaatselijke hobbyclub.

De Wargo Signature Edge 540T 3D is nog een ander ongelooflijk vliegtuig in de serie geïnspireerd door de beroemde 3D-piloot Michael Wargo. De Edge 540T is speciaal ontworpen voor zeer nauwkeurige 3D-vlieg- en aerobatic-training. Michael Wargo, onze teampiloot en 3D-expert, wilde een schuimvliegtuig dat stijver en lichter was dan andere foamies. Dit werd bereikt door de combinatie van een stijf, lichtgewicht balsaframe bedekt met lichtgewicht, crashbestendig EPP-schuim.

We have all had to start learning to fly an RC model at some point, and a stable, high-wing trainer that is very forgiving is what is required. The Dancing Wings Hobby Vogee-16 Trainer is the perfect choice for the rookie pilot. It has a large, flat-bottomed wing with dihedral which enables it to fly very slowly, and it has the stability to sort itself out if you get in a muddle. The Vogee's flying characteristics are very benign, beginners tend to over-control, and the Vogee is very gentle in its handling, especially if you install one of the readily available 3-axis gyros that are available on the market these days. It also has a tricycle landing gear with a steerable nosewheel which really helps with the take-offs and landings. This version of the Vogee is supplied with a powerful 2817-900KV brushless motor, a 60A brushless ESC, an 11" prop, 2 x 37g servos, and 2 x 17g 

The Dancing Wings Hobby Stick-14T 3D aerobatic trainer is the perfect choice for intermediate and experienced RC pilots alike. It is based on the classic stick design and is quite capable of all the usual aerobatic maneuvers, plus with the right power train, it doubles up as the perfect 3D trainer. It has a very wide speed range, it is just as happy flying slowly as it is screaming about the sky. For added fun and enjoyment, the strip ailerons are split halfway making for outboard ailerons and inboard flaps. This allows for really slow or steep approach landings, and if the flaps are mixed in with your other controls it allows you to customize the handling to suit your own flying style. 

The Dancing Wings Hobby S.E.5A is a detailed scale model of the famous World War 1 biplane fighter. The kit comes almost ready to fly and is constructed in balsa for a strong, lightweight, authentic structure. A lot of scale detail is supplied including, scale exhausts, scale wheels, and a dummy machine gun, plus a full accessory kit is also supplied which includes all the necessary hardware including scale rigging to complete the kit.

Improving on the popular Bixler 2, this latest kit is the perfect trainer plane or inexpensive FPV platform. Attach your flight camera into the nose or canopy of the plane to enjoy First Person View while flying. The Bixler 3 kit requires a motor, ESCs, a radio system and battery. 

The Bixler 1.1 is a proven platform for beginners right through to intermediate pilots. Well known for stability, the Bixler is also an excellent choice for an inexpensive FPV platform and perfect for those lazy Sunday afternoons.

This version of the Bixler 1.1 is not supplied with a motor, ESC, servos, or RC equipment, it allows you to choose yourself the components you wish to use. Whatever you are looking for, the Bixler 1.1 has it covered.

This great-looking EDF sports jet is the one you have all been waiting for, and it has one of the lowest all-up weights in its class, it is a good 500g lighter than comparable models that are available on the market today. It is a sport scale design and is based on the iconic BAE Hawk trainer as used by military air forces all over the world. This easy-to-assemble model has been termed as an almost ready-to-fly-plus, it is completely built out of the box, the wings, all-flying horizontal stabilizers, and vertical stabilizer just bolt-on, and pre-installed are a set of all-metal electronic retracts with doors, sequencer control box, and lightweight wheels, 11 high-torque, metal-geared digital servos, and a set of pre-installed, day-bright LED lights. The Sports Hawk comes pre-painted in a Formula One-inspired paint scheme and includes a set of HobbyKing brand decals that you can apply if you wish. The pre-painted Sport Hawk color scheme lends itself nicely to having other sponsorship decals being applied, or you could even repaint it in a custom color scheme, the choice is yours. A nice touch is the removable base to the cockpit area which makes it very easy to add a pilot and more cockpit detail if you wish.

Looking for the perfect trainer? Or an in-expensive FPV platform? Maybe you are a club pilot looking for something you can just pull out of the car and fly on one of those lazy Sunday afternoons? The Hobbyking® ™ Bixler® ™ 2 ticks all of these boxes and more! The Bixler® ™ 2 has had some improvements to make it even better such as a bigger air inlet for better motor cooling.