Vliegtuigen

Specifications

Wingspan: 400mm
Control Range: Up to 150 meters
Flight Time: Up to 20 minutes per battery
Battery Options: 1, 2, or 3 LiPo batteries
Controller Mode: Mode 2 (Throttle Left)
Material: EPP Foam
Recommended Age: 14+

Package Includes:

1 x RC Airplane
1 x Remote Controller (4AA Batteries Required, Not Included)
3 x Pairs of Propellers (1 Two-Blade & 2 Four-Blade)
1 x USB Charging Cable
1 x English Instruction Manual

Specification:
Item: Mini F4U V2
Version: RTF
Length: 12.5 inches
Wingspan: 15.7 inches
Flying weight: 0.1lbs
Material: EPP
Motor: 10mm coreless motor 
Speed control: None
Servo: 1.3g servo*2 (3-CH)
Battery: 3.7v 400mah Li-po
Charger: USB cable
Remote control: 2.4GHz 4CH
Experience level: Beginners
Where to play: Outdoor
Is Assembly required: No
Flight time: 14mins
Flaps: No

Features:
• Channels: 4-Channel Control
• Assembly: Fully Assembled and Ready to Fly (RTF)
• Recommended Age: Suitable for Beginners、Kids And Adults

Specs:
Version: RTF
Length: 500 mm
Wingspan: 400 mm
Material: EPP
Motor:upgraded motor
Servo: 4CH
Battery: 7.4V 400mAh
Charger: USB cable
Remote control: 2.4GHz 4CH
Experience level: Beginners

Included：
1 x Aircraft Body
1 x 4CH-Remote Control
1 x Batteries
2 x Propeller
1 x Product Manual
1 x Landing gear

Required:
4 x AA batteries for transmitter

Specs:
Product Name: Volantex Mini T-28 Trojan
Version: RTF 
Material: EPP
Wingspan: 400 mm (15.75 inches)
Length: 317 mm (12.48 inches)
Motor: 10mm coreless motor
Receiver: 2 in 1 integrated board
Servo: 2g plastic gear *3
Propeller: 130X70mm
Remote control: 2.4GHz 4CH
Flying weight: 60g
Recommended battery: 3.7V-360MAH
Package size (length x width x height): 35X35*15.5cm
Flight time: 14mins
Charging time: 2.5 hours

Included:
1 x Volantex (RTF) Mini T-28 Trojan EPP 400mm Wingspan 2.4G 6-Axis Gyro RC Airplane Trainer
1 x 4ch 2.4GHz transmitter
1 x 3.7V 400mAh LiPo battery
1 x USB battery charger
1 x User manual

Required:
4 x AA batteries for transmitter

Features:
• EPP material, good toughness and more resistance to falling and explosion.
• With flight control, can fly in a strong wind of level 5.
• Simple assembly, convenient disassenbly.
• Compatible with Futaba receivers (5V for S-BUS, 3V for DSM).
• With low signal and voltage alarm,timely remind the return.
• Strong power motor,quick response and fast locking.
• Support two takeoff methods: ground takeoff and hand throw takeoff.
• With self-stabilization system, you can get start quickly.
• 6 channel glider remote controlled aircraft (rise, descent, left turn, right turn, forward roll, 3D crane flight)
• Support one-key 3D stunts - With 6-Axis gyroscope, automatically balance, suitable for beginners.

Specs:
Item Name: QIDI-550
Material: EPP
Wingspan: 505mm
Fuselage Length: 620mm
Motor: 2004 KV2800 brushless motor
Servo: 4.3g digital *3pcs
ESC: 12A brushless
Propeller: 6x3cm 2-blade
Battery: 7.4V 500mAh
Vertical Flight Time: 20mins
Normal Flight Time: 20mins
Charging Time: 20mins
Remote Control: 2.4G 6CH Mode 2
Control Range: About 400m
Takeoff Weight: 140g
Product Size: 50x62x10cm
Package Size: 54.6x11.8x19.3cm
Assembly: Required

Included:
1 x QIDI 550 (RTF) SWIFT-ONE Sky Challenger EPP 6CH Profile 3D Aerobatic Plane w/6-Axis Gyro Stabilization System (505mm)
1 x 6ch 2.4GHz transmitter
1 x 7.4V 500mAh LiPo battery
1 x Spare propeller
1 x Screwdriver
1 x USB battery charger
1 x User manual

Required:
4 x AA batteries for transmitter

The Dancing Wings Hobby Savage Bobber is a small, lightweight foam model that is quick and simple to build. The full-size Savage Bobber was devised by the Zlin Aviation Company. The Bobber as in the motorcycle world means that it is a stripped-down, customized version of an original. The Savage Bobber is a stripped-down, customized version of its older brother the Savage Classic. It is lighter, more maneuverable, and has a slightly narrower fuselage, and the absence of covering to the rear of the fuselage greatly improves the crosswind handling.

The model is reasonably straightforward to assemble, it is manufactured in pre-painted high-quality EPP foam sheet for the majority of the construction, tough plastic for the open framework rear fuselage, and lightweight balsa for the internal structure. Carbon strips are also included to reinforce and improve the stiffness of the structure. It builds up quickly into a good-looking, fun-to-fly lightweight (only 98g) sports plane that is perfect for indoor or park flying. This ARF kit is supplied with a powerful 1108-4000KV brushless motor, 5A brushless ESC, 5" propeller, and 4 x 2g servos.

The Dancing Wings Hobby Shining is a large lightweight profile-style foam kit that is quick and simple to build. It has been designed to be the perfect introduction to 3D flying and will perform extreme 3D maneuvers such as waterfalls, harriers, knife-edge loops, rolling circles, and much more.

The model is very straightforward to assemble, it is manufactured in pre-painted high-quality EPP foam sheet for the majority of the construction so the parts count is quite low, and carbon strips are supplied for strengthening. It builds up quickly into a good-looking, fun-to-fly lightweight extreme sport 3D plane that is perfect for park flying and on playing fields. This ARF model is supplied with a powerful 2216-950KV brushless motor, 30A brushless ESC, 10" propeller, and 4 x 9g servos.

After the incredible success of the Tundra V1 and V2, Durafly has decided to produce yet another version with even more improvements to bring the Tundra series bang up to date. The V3 is now a pure 4S set-up so it has power in abundance to make your flying even more fun than it was before (if that is at all possible!). Other changes and improvements include daylight bright LEDs (so bright they are suitable for true dawn-to-dusk flying), a reinforced nylon prop that is more efficient, and better balanced, a return to the classic EPO foam wheels which are lighter, and stronger, pre-installed pushrods, and hex-head bolts and screws throughout. The V3 is available in the classic Tundra green and white scheme, or a red and silver color scheme Durafly has called the "Inspire". The reason is that the original Tundra was "Inspired" by the "Highlander" full-size SuperStol experimental airplane.

De H-King Viper 64 is betaalbaar, zeer stabiel en heeft voorspelbare handling kwaliteiten, waardoor het de ideale keuze is voor je eerste vlucht met EDF jets. Hij ziet er prachtig uit en de prestaties op zijn 6S set-up geven hem een fantastische snelheid en de mogelijkheid om grote, jet-achtige manoeuvres uit te voeren, dit maakt het ook de perfecte sportjet voor de meer ervaren RC-piloot. De H-King Viper 64 is gebaseerd op een klein tweezits zelfgebouwd straalvliegtuig, ontworpen door de Viper Aircraft Corporation in de Verenigde Staten aan het eind van de jaren 1990.

The ZOHD Altus FPV airplane offers cutting-edge technology for those enthusiasts seeking unmatched performance and versatility. The Altus combines state-of-the-art technology with a practical design and offers an unparalleled flying experience. This portable design is very easy to assemble, no glue is required, and the wings and tail are detachable making it very easy to transport, even in a backpack for when trekking to those out-of-the-way places.

The ZOHD Drift is a super easy, hand-launch slow-fly pusher glider that has been designed specifically for FPV flying. It is extremely stable in flight, but the controls remain very responsive and accurate. Being a pusher prop design gets the prop well away from the ground, and the hands when launching, it also allows the camera an uncluttered viewing angle.

The Drift is very easy to assemble, no glue is required, and the wing and tail boom remain detachable, making for easy transportation. The Drift has a large battery bay for extended flight times, plus a nose camera bay compatible with most FPV, and AIO cameras available today. It also has a dedicated equipment bay for the flight controller, and  GPS unit, etc. The strong EPP foam airframe also benefits from a tough, specially designed H-girder spar for the wing, built-in CF inside the fuselage for enhanced strength, and CF pushrods throughout for precision control.

The ZOHD Dart 250G is the small brother to the popular Dart XL, it is the world's first high-end sub 250g FPV flying wing. With increasing regulations affecting our hobby, it offers an FPV experience without as much hassle as the bigger, heavier models. You will still need to check your country's regulations, some do require you to register a model airplane with a camera on it even when below 250g. The little Dart 250G offers incredible lifting power despite its size, excellent handling, and portability, which makes it the ideal choice for FPV flying in a small package. Features include an optimized airfoil, dedicated equipment bay for flight controller and GPS, nose camera bay, super durable Teflon-covered underbelly, protected leading edge to the wing, and so much more.

The ZOHD Dart 250G is the small brother to the popular Dart XL, it is the world's first high-end sub 250g FPV flying wing. With increasing regulations affecting our hobby, it offers an FPV experience without as much hassle as the bigger, heavier models. You will still need to check your country's regulations, some do require you to register a model airplane with a camera on it even when below 250g. The little Dart 250G offers incredible lifting power despite its size, excellent handling, and portability, which makes it the ideal choice for FPV flying in a small package. Features include an optimized airfoil, dedicated equipment bay for flight controller and GPS, nose camera bay, super durable Teflon-covered underbelly, protected leading edge to the wing, and so much more.

The ZOHD Talon GT Rebel FPV airplane offers a revolutionary design for those enthusiasts seeking unmatched performance and versatility. The Talon GT Rebel combines state-of-the-art technology with the best of old-school practices which offers an unparalleled flying experience. This portable design is very easy to assemble, no glue is required, and the wings and tail remain detachable making it very easy to transport, even in a backpack for when trekking to those out-of-the-way places.

Na het succes van de EFX Racer werd besloten om een mini versie te produceren, zoals ze zeggen, alle goede dingen komen ook in kleine verpakkingen, dus de MFX Racer was geboren. De MFX is ontworpen volgens dezelfde veeleisende normen als zijn grotere broers en biedt nog steeds snelheid, kracht, wendbaarheid en de stabiliteit die je gewend bent van een Durafly model. Bovendien krijg je de eenvoud van montage en de kwaliteit die alleen een EPO-model van Durafly kan bieden.

Het aantal onderdelen en de montagetijd zijn minimaal, de MFX Racer klemt en schroeft gewoon in elkaar in minder tijd dan het kost om een batterij op te laden. De MFX Racer met zijn 4S setup is snel, maar voelt toch uitzonderlijk stabiel aan en geeft de piloot dat locked-in gevoel. Maar in tegenstelling tot de meeste snelheidsmachines heeft hij ook een uitzonderlijk goede langzame besturing. Met zijn 4-kanaals besturing is de MFX Racer ook zeer aerobatisch, met grote loopings, snelle rollen, knife edge, snaps en spins, de MFX Racer kan het allemaal en nog veel meer, zijn enige limiet ben jij de piloot! De MFX heeft 2 vleugelopties (beide worden meegeleverd in de doos), een standaard 815mm optie, of de 715mm clipped wing optie. De standaard vleugelopstelling geeft een veel betere klimsnelheid, terwijl de geknipte vleugelopstelling de rolsnelheid drastisch verhoogt.

Avios continues to bring you great flying, and high-quality RC models of interesting subjects, this theme continues with the Avios Twin Otter STOL (Short Takeoff and Landing) twin-engine plane. The Avios model captures the looks and great flying characteristics of the full-size inspired Twin Otter. The impressive power-to-weight ratio and light wing loading makes for exceptional low-speed handling and STOL flight characteristics.

The Avios Twin Otter is also crammed full of outstanding features, these include a set of large barn door style flaps, counter-rotating props for improved handling, scale outline with detailed surface finish, and scale plastic parts. Other features include a fully sprung, all metal CNC nose strut with servo saver, low bounce soft foam oversized bush wheels, and day bright LED lights throughout.

The list of outstanding features goes on with a set of floats included, these are easily fitted in place of the tricycle landing gear so that you can have even more fun flying from lakes and rivers. The included Aerostar RVS speed controllers make flying from water on the floats so much easier, they allow you to maneuver and taxi even in the more challenging conditions and situations that can be found on inland waters. To further help when flying with the floats fitted are a pair of optional tail fins, these increase the yaw stability caused by the extra drag of the floats. Avios have also included two magnetically held interchangeable nose sections, one short to emulate the "Series 100" Twin Otter, and one long so that you can quickly change the look of your Twin Otter to a "Series 200".

The Volantex RC 4-channel P-51D Mustang is the perfect ready-to-fly small warbird that comes complete with a transmitter, receiver, integrated ESC, and built-in Xpilot stabilization system. This gyro system offers super stable flying and self-leveling which makes it perfect for early, and relatively inexperienced pilots. The gyro is switchable from the transmitter, 3 modes can be selected. The first is beginners mode which gives maximum stabilization and reduces the amount of control the pilot has, the second is intermediate, which reduces the stabilization and gives the pilot slightly more control. The final mode is no gyro stabilization and the pilot has full control authority. It also features a "One-Key" aerobatic system which makes performing aerobatics like loops and rolls a breeze, and a "One-Key" return system.

The Volantex RC 4-channel Messerschmitt Bf 109 is the perfect ready-to-fly small warbird that comes complete with a transmitter, receiver, integrated ESC, and built-in Xpilot stabilization system. This gyro system offers super stable flying and self-leveling which makes it perfect for early, and relatively inexperienced pilots. The gyro is switchable from the transmitter, 3 modes can be selected. The first is beginners mode which gives maximum stabilization and reduces the amount of control the pilot has, the second is intermediate, which reduces the stabilization and gives the pilot slightly more control. The final mode is no gyro stabilization and the pilot has full control authority. It also features a "One-Key" aerobatic system which makes performing aerobatics like loops and rolls a breeze, and a "One-Key" return system.

The ZOHD Dart XL FPV flying wing airplane offers incredible lifting power, excellent handling, and portability, making it the ideal choice for long-range FPV flying. This "Enhanced Version" features a newly designed motor mount, a GPS bay with cover, built-in carbon fiber for strength, a new optimized airfoil, and a strengthened battery bay. The Dart XL incorporates Vortex generators and reversed wingtips for improved handling, lift efficiency, and yaw stability. It also has a computer-designed airflow pod that maximizes the cooling to all the onboard equipment to minimize overheating electronics and reduce the risk of failure. The vertical fins are detachable, making it much easier to transport to those out-of-the-way places for the best FPV experiences.