Vliegtuigen

Dit fantastisch uitziende en fantastisch vliegende Avios KingTwin 1700 sport/schaalmodel is gebaseerd op een kleine twin-turboprop en doet sterk denken aan het type dat wordt gebruikt door de militaire of civiele chartermaatschappijen over de hele wereld. Het simplistische, maar opvallende kleurenschema geeft het type verf weer dat gewoonlijk wordt gebruikt op civiele propliners.

De KingTwin 1700 zit boordevol coole functies, waaronder LED-verlichting, intrekbare en gesplitste flappen. De aandrijflijn van 2 x Aerostar 3748-820KV borstelloze outrunners met Aerostar 40A ESC's werd na zorgvuldig testen door het Avios-team gekozen. Deze combinatie van motoren, ESC's, contra-roterende rekwisieten en een 4S LiPo-batterij bleek de optimale opstelling te zijn voor kracht en duur.

De Wargo Signature Edge 540T 3D is nog een ander ongelooflijk vliegtuig in de serie geïnspireerd door de beroemde 3D-piloot Michael Wargo. De Edge 540T is speciaal ontworpen voor zeer nauwkeurige 3D-vlieg- en aerobatic-training. Michael Wargo, onze teampiloot en 3D-expert, wilde een schuimvliegtuig dat stijver en lichter was dan andere foamies. Dit werd bereikt door de combinatie van een stijf, lichtgewicht balsaframe bedekt met lichtgewicht, crashbestendig EPP-schuim.

De H-King P-51 "Galloping Ghost" is de eerste in een nieuwe mini-serie van H-King, de "Reno Aces", WO2-jagers gekleed om indruk te maken tijdens de luchtraces. De P-51 "Galloping Ghost" met de meegeleverde standaard 3108-1070KV borstelloze motor biedt een echt snel model direct uit de doos met snelheden van bijna 100mph bij gebruik van de aanbevolen 2200 mAh 4S LiPo. Als u echter een ervaren hand bent en op zoek bent naar snelheden van 100+ mph, dan is er de optionele drop-in fit 3108-1170KV "Pro" borstelloze motor. Dit geeft je fantastisch uitziende Reno Ace echt ballistische prestaties op dezelfde prop, ESC en 4S-batterij voor degenen die het extra rotatiekoppel bij de lancering aankunnen.

De H-King FG-1 Corsair "Lucky Gallon" is de derde in de mini-serie van H-King, de "Reno Aces", WO2-jagers gekleed om indruk te maken tijdens de luchtraces. De FG-1 Corsair "Lucky Gallon" met de meegeleverde standaard 3108-1070KV borstelloze motor biedt een echt snel model direct uit de doos met snelheden van bijna 100mph bij gebruik van de aanbevolen 2200mAh 4S LiPo. Als u echter een ervaren hand bent en op zoek bent naar snelheden van meer dan 100mph, dan is er de optionele drop-in fit 3108-1170KV 'Pro' borstelloze motor. Dit geeft je fantastisch uitziende Reno Ace echt ballistische prestaties op dezelfde prop, ESC en 4S-batterij voor degenen die het extra rotatiekoppel bij de lancering aankunnen.

Deze versie van de Yak-11 is de Red Reno Racer, dit is geen totaal kleurenschema, maar is losjes gebaseerd op de Strega P-51 Reno Mustang. Zoals hierboven vermeld, wordt hij als racerversie geleverd met een aandrijflijn die is ontwikkeld voor pure snelheid. Met behulp van een 6S LiPo-pakket, geeft de 5052-550KV borstelloze motor met de meegeleverde 95A ESC en 16x6 prop de Yak-11 een ongelooflijke snelheid van maximaal 200mph. Dit is snel, en het is een lust voor het oog om een ​​model van deze indrukwekkende grootte te zien die snelle pyloondraaiingen dicht bij de grond maakt. Aerobatics zijn ook een droom om met de Yak uit te voeren, de rollen zijn erg axiaal en de looping-manoeuvres zijn groot vanwege de overvloed aan kracht. De enige beperkingen voor de aerobatics die het zal uitvoeren, zijn je vliegvaardigheden.

Deze versie van de Yak-11 is gebaseerd op een full-size die momenteel in Duitsland vliegt, het kleurenschema eert de Franse eenheden die in WW2 voor de Russen vlogen. Zoals hierboven vermeld, wordt hij als warbird-versie geleverd met een aandrijflijn die is ontwikkeld voor meer koppel. Met behulp van een 6S LiPo-pakket, zal de 5052-410KV borstelloze motor met de meegeleverde 95A ESC en 17x10 prop de Yak-11 nog steeds een indrukwekkende snelheid van maximaal 100mph geven, maar de verticale prestaties moeten worden gezien om het te geloven. Warbird-manoeuvres op grote schaal zijn een droom om te vliegen met de beschikbare hoeveelheid koppel en vermogen, en de rollende manoeuvres zijn erg axiaal. Maak indruk op de toeschouwers met langzame schaalachtige flypasts met flappen en de wielen naar beneden, of snelle, lage beschietingen en omhoog trekken in een halve Cubaanse acht of een vergelijkbare manoeuvre. De Yak-11 in dit herdenkingskleurenschema ziet er vanuit alle hoeken fantastisch uit tijdens het vliegen of zittend op de grond.

The Hobbyking H-King Mini L-39 has been developed from an earlier version that had a 50mm fan unit. This latest rendition from RC L39 aircraft sports an uprated 64mm 8-blade EDF fan unit with a 2220-3300KV brushless outrunner motor, a 50A ESC, and uses a 4S LiPo battery instead of the original 3S setup. The full-size L-39 jet was designed in the Czech Republic as a high-performance jet trainer for performing basic to advanced pilot training. It was the first trainer aircraft in the world to be equipped with a turbofan.

Dit fantastisch uitziende en fantastisch vliegende Avios KingTwin 1700 sport/schaalmodel is gebaseerd op een kleine twin-turboprop en doet sterk denken aan het type dat wordt gebruikt door de militaire of civiele chartermaatschappijen over de hele wereld. Met zoveel fantastische kleurenschema's die beschikbaar zijn voor dit type vliegtuig, heeft Avios besloten om een ​​effen witte versie te produceren. Deze effen witte afwerking biedt het perfecte blanco canvas om een ​​volledig uniek en op maat gemaakt kleurenschema naar keuze te produceren.

De ongelooflijke Frenzy is de perfecte allrounder. Met minder controle worpen is het een soepel, stabiel en opmerkelijk gemakkelijk te vliegen vliegtuig dat perfect is voor de beginner of beginner. Verhoog die worpen en met zijn hoge vermogen-gewichtsverhouding op een 3S-opstelling doet de Frenzy zijn naam eer aan. Het is in staat tot een breed scala aan verbazingwekkende aerobatic manoeuvres en zal voldoen aan de eisen van zelfs de meest ambitieuze aerobatic piloot.

Na het succes van de EFX Racer werd besloten om een mini versie te produceren, zoals ze zeggen, alle goede dingen komen ook in kleine verpakkingen, dus de MFX Racer was geboren. De MFX is ontworpen volgens dezelfde veeleisende normen als zijn grotere broers en biedt nog steeds snelheid, kracht, wendbaarheid en de stabiliteit die je gewend bent van een Durafly model. Bovendien krijg je de eenvoud van montage en de kwaliteit die alleen een EPO-model van Durafly kan bieden.

This fantastic looking XFly 80mm EDF jet is a detailed scale model of the French Air Force Alpha Jet, it is packed full of scale details including molded-in panel lines, a simulated antenna, a crystal clear canopy with cockpit detail, removable gun pod, and much more. Scale features include servoless retracts with CNC machined scale, sprung oleos and sequenced gear doors, functional LED nav and landing lights, operational flaps, and full-flying horizontal stabs. Take your scale flying experience to another level with this impressive 6S-powered XFLY Alpha Jet in a French Air Force color scheme.

This fantastic-looking XFly 80mm EDF jet is a detailed scale model of the Dassault/Dornier Alpha Jet, this version is in the color scheme of the famous Patrouille de France aerobatic team. It is packed full of scale details including molded-in panel lines, a simulated antenna, a crystal clear canopy with cockpit detail, and much more. Scale features include servoless retracts with CNC machined scale, sprung oleos and sequenced gear doors, functional LED nav and landing lights, operational flaps, and full-flying horizontal stabs. Take your scale flying experience to another level with this impressive 6S-powered XFLY Alpha Jet in the classic Patrouille de France color scheme.

The XFLY Sukhoi Su-27 Flanker 750mm EDF jet is an easy-to-fly, great-looking, and versatile scale EDF model that will appeal to a wide variety of pilots, including those with limited experience in flying EDF jets. The 4S-compatible power system includes twin 12-bladed 50mm fan units that deliver an abundance of power for excellent thrust, loads of speed, and an incredible turbine-like sound. The full-size Sukhoi Su-27 Flanker is a long-range air defense jet fighter that was designed as a direct competitor to the McDonnell Douglas F-14. The swept-back wing configuration gives the Su-27 excellent slow-speed handling and short-field capabilities, but it also allows for high maneuverability at speed. These design attributes carry over extremely well to the XFLY model of the Sukhoi Su-27.

The XFLY Sukhoi Su-27 Flanker 750mm EDF jet is an easy-to-fly, great-looking, and versatile scale EDF model that will appeal to a wide variety of pilots, including those with limited experience in flying EDF jets. The 4S-compatible power system includes twin 12-bladed 50mm fan units that deliver an abundance of power for excellent thrust, loads of speed, and an incredible turbine-like sound. The full-size Sukhoi Su-27 Flanker is a long-range air defense jet fighter that was designed as a direct competitor to the McDonnell Douglas F-14. The swept-back wing configuration gives the Su-27 excellent slow-speed handling and short-field capabilities, but it also allows for high maneuverability at speed. These design attributes carry over extremely well to the XFLY model of the Sukhoi Su-27.

This fantastic-looking XFly 80mm EDF jet is a detailed scale model of a US Airforce T-7A Red Hawk advanced trainer. It is packed full of scale details including molded-in panel lines, simulated antenna, pitot tube, a crystal clear canopy with cockpit detail, missiles, drop tanks, and much more. Scale features include servoless retracts with CNC machined scale, sprung oleos and sequenced gear doors, functional LED nav and landing lights, full-flying horizontal stabs, and operational flaps.

The XFLY Partenavia P68 is a small, semi-scale twin-engined model that is perfect for flying in small areas such as local parks, sports fields, etc. It has been designed to be extremely easy to fly and assemble, which makes it perfect as an entry-level choice for the novice pilot. The design is based on the full-size Partenavia P68 which is a 6-seater, twin-engined high-wing monoplane that is generally used for light transport and training.

The XFLY Eagle Twin is an innovative racing model with twin EDF motors on each wing tip, this is a radical configuration and allows for a large area in the middle of the fuselage for batteries, and other equipment. The included power system gives a power-to-weight ratio of over 1:15 which allows for easy hand-launching and an incredible performance. Top speeds of over 110mph are achievable and a special EDF mixing configuration makes the Eagle capable of performing differential maneuvers including flat spins, inverted flat spins, and other challenging aerobatic maneuvers.

The XFLY Eagle Twin is an innovative racing model with twin EDF motors on each wing tip, this is a radical configuration and allows for a large area in the middle of the fuselage for batteries, and other equipment. The included power system gives a power-to-weight ratio of over 1:15 which allows for easy hand-launching and an incredible performance. Top speeds of over 110mph are achievable and a special EDF mixing configuration makes the Eagle capable of performing differential maneuvers including flat spins, inverted flat spins, and other challenging aerobatic maneuvers.

The Dancing Wings Hobby Fokker Eindecker III is a scale model of the famous World War 1 monoplane fighter. The kit comes almost ready to fly and is constructed in balsa for a strong, lightweight, authentic structure. A lot of scale detail is supplied including, a dummy engine, scale wheels, and a dummy machine gun, plus a full accessory kit is also supplied which includes all the necessary hardware including scale rigging to complete the kit.

The Dancing Wings Hobby S.E.5A is a detailed scale model of the famous World War 1 biplane fighter. The kit comes almost ready to fly and is constructed in balsa for a strong, lightweight, authentic structure. A lot of scale detail is supplied including, scale exhausts, scale wheels, and a dummy machine gun, plus a full accessory kit is also supplied which includes all the necessary hardware including scale rigging to complete the kit.

We have all had to start learning to fly an RC model at some point, and a stable, high-wing trainer that is very forgiving is what is required. The Dancing Wings Hobby Vogee-16 Trainer is the perfect choice for the rookie pilot. It has a large, flat-bottomed wing with dihedral which enables it to fly very slowly, and it has the stability to sort itself out if you get in a muddle. The Vogee's flying characteristics are very benign, beginners tend to over-control, and the Vogee is very gentle in its handling, especially if you install one of the readily available 3-axis gyros that are available on the market these days. It also has a tricycle landing gear with a steerable nosewheel which really helps with the take-offs and landings. This version of the Vogee is supplied with a powerful 2817-900KV brushless motor, a 60A brushless ESC, an 11" prop, 2 x 37g servos, and 2 x 17g 

The Dancing Wings Hobby Stick-14T 3D aerobatic trainer is the perfect choice for intermediate and experienced RC pilots alike. It is based on the classic stick design and is quite capable of all the usual aerobatic maneuvers, plus with the right power train, it doubles up as the perfect 3D trainer. It has a very wide speed range, it is just as happy flying slowly as it is screaming about the sky. For added fun and enjoyment, the strip ailerons are split halfway making for outboard ailerons and inboard flaps. This allows for really slow or steep approach landings, and if the flaps are mixed in with your other controls it allows you to customize the handling to suit your own flying style. 

The Dancing Wings Hobby Cute Girl laser cut balsa kit captures the type of vintage model airplane that was used in the early days of RC with radio assist. It has that classic retro look, lots of wing dihedral, band on wings, a large cabin, classic shapes to the wings and empennage, and tail dragger landing gear, all the features required for a retro classic look.

The controls are just basic 3 channels, rudder, elevator, and motor control, this keeps things nice and simple. We recommend that you power the Cute Girl with a brushless motor set-up. However, a nitro or a diesel engine can be used for that even more authentic vintage look and classic soundtrack.

The Dancing Wings Hobby Savage Bobber is a small, lightweight foam model that is quick and simple to build. The full-size Savage Bobber was devised by the Zlin Aviation Company. The Bobber as in the motorcycle world means that it is a stripped-down, customized version of an original. The Savage Bobber is a stripped-down, customized version of its older brother the Savage Classic. It is lighter, more maneuverable, and has a slightly narrower fuselage, and the absence of covering to the rear of the fuselage greatly improves the crosswind handling.

The model is reasonably straightforward to assemble, it is manufactured in pre-painted high-quality EPP foam sheet for the majority of the construction, tough plastic for the open framework rear fuselage, and lightweight balsa for the internal structure. Carbon strips are also included to reinforce and improve the stiffness of the structure. It builds up quickly into a good-looking, fun-to-fly lightweight (only 98g) sports plane that is perfect for indoor or park flying. This ARF kit is supplied with a powerful 1108-4000KV brushless motor, 5A brushless ESC, 5" propeller, and 4 x 2g servos.

The Dancing Wings Hobby Shining is a large lightweight profile-style foam kit that is quick and simple to build. It has been designed to be the perfect introduction to 3D flying and will perform extreme 3D maneuvers such as waterfalls, harriers, knife-edge loops, rolling circles, and much more.

The model is very straightforward to assemble, it is manufactured in pre-painted high-quality EPP foam sheet for the majority of the construction so the parts count is quite low, and carbon strips are supplied for strengthening. It builds up quickly into a good-looking, fun-to-fly lightweight extreme sport 3D plane that is perfect for park flying and on playing fields. This ARF model is supplied with a powerful 2216-950KV brushless motor, 30A brushless ESC, 10" propeller, and 4 x 9g servos.

After the incredible success of the Tundra V1 and V2, Durafly has decided to produce yet another version with even more improvements to bring the Tundra series bang up to date. The V3 is now a pure 4S set-up so it has power in abundance to make your flying even more fun than it was before (if that is at all possible!). Other changes and improvements include daylight bright LEDs (so bright they are suitable for true dawn-to-dusk flying), a reinforced nylon prop that is more efficient, and better balanced, a return to the classic EPO foam wheels which are lighter, and stronger, pre-installed pushrods, and hex-head bolts and screws throughout. The V3 is available in the classic Tundra green and white scheme, or a red and silver color scheme Durafly has called the "Inspire". The reason is that the original Tundra was "Inspired" by the "Highlander" full-size SuperStol experimental airplane.

De H-King Viper 64 is betaalbaar, zeer stabiel en heeft voorspelbare handling kwaliteiten, waardoor het de ideale keuze is voor je eerste vlucht met EDF jets. Hij ziet er prachtig uit en de prestaties op zijn 6S set-up geven hem een fantastische snelheid en de mogelijkheid om grote, jet-achtige manoeuvres uit te voeren, dit maakt het ook de perfecte sportjet voor de meer ervaren RC-piloot. De H-King Viper 64 is gebaseerd op een klein tweezits zelfgebouwd straalvliegtuig, ontworpen door de Viper Aircraft Corporation in de Verenigde Staten aan het eind van de jaren 1990.

The ZOHD Altus FPV airplane offers cutting-edge technology for those enthusiasts seeking unmatched performance and versatility. The Altus combines state-of-the-art technology with a practical design and offers an unparalleled flying experience. This portable design is very easy to assemble, no glue is required, and the wings and tail are detachable making it very easy to transport, even in a backpack for when trekking to those out-of-the-way places.

The ZOHD Drift is a super easy, hand-launch slow-fly pusher glider that has been designed specifically for FPV flying. It is extremely stable in flight, but the controls remain very responsive and accurate. Being a pusher prop design gets the prop well away from the ground, and the hands when launching, it also allows the camera an uncluttered viewing angle.

The Drift is very easy to assemble, no glue is required, and the wing and tail boom remain detachable, making for easy transportation. The Drift has a large battery bay for extended flight times, plus a nose camera bay compatible with most FPV, and AIO cameras available today. It also has a dedicated equipment bay for the flight controller, and  GPS unit, etc. The strong EPP foam airframe also benefits from a tough, specially designed H-girder spar for the wing, built-in CF inside the fuselage for enhanced strength, and CF pushrods throughout for precision control.

The ZOHD Dart 250G is the small brother to the popular Dart XL, it is the world's first high-end sub 250g FPV flying wing. With increasing regulations affecting our hobby, it offers an FPV experience without as much hassle as the bigger, heavier models. You will still need to check your country's regulations, some do require you to register a model airplane with a camera on it even when below 250g. The little Dart 250G offers incredible lifting power despite its size, excellent handling, and portability, which makes it the ideal choice for FPV flying in a small package. Features include an optimized airfoil, dedicated equipment bay for flight controller and GPS, nose camera bay, super durable Teflon-covered underbelly, protected leading edge to the wing, and so much more.

The ZOHD Dart 250G is the small brother to the popular Dart XL, it is the world's first high-end sub 250g FPV flying wing. With increasing regulations affecting our hobby, it offers an FPV experience without as much hassle as the bigger, heavier models. You will still need to check your country's regulations, some do require you to register a model airplane with a camera on it even when below 250g. The little Dart 250G offers incredible lifting power despite its size, excellent handling, and portability, which makes it the ideal choice for FPV flying in a small package. Features include an optimized airfoil, dedicated equipment bay for flight controller and GPS, nose camera bay, super durable Teflon-covered underbelly, protected leading edge to the wing, and so much more.

The ZOHD Talon GT Rebel FPV airplane offers a revolutionary design for those enthusiasts seeking unmatched performance and versatility. The Talon GT Rebel combines state-of-the-art technology with the best of old-school practices which offers an unparalleled flying experience. This portable design is very easy to assemble, no glue is required, and the wings and tail remain detachable making it very easy to transport, even in a backpack for when trekking to those out-of-the-way places.

Na het succes van de EFX Racer werd besloten om een mini versie te produceren, zoals ze zeggen, alle goede dingen komen ook in kleine verpakkingen, dus de MFX Racer was geboren. De MFX is ontworpen volgens dezelfde veeleisende normen als zijn grotere broers en biedt nog steeds snelheid, kracht, wendbaarheid en de stabiliteit die je gewend bent van een Durafly model. Bovendien krijg je de eenvoud van montage en de kwaliteit die alleen een EPO-model van Durafly kan bieden.

Het aantal onderdelen en de montagetijd zijn minimaal, de MFX Racer klemt en schroeft gewoon in elkaar in minder tijd dan het kost om een batterij op te laden. De MFX Racer met zijn 4S setup is snel, maar voelt toch uitzonderlijk stabiel aan en geeft de piloot dat locked-in gevoel. Maar in tegenstelling tot de meeste snelheidsmachines heeft hij ook een uitzonderlijk goede langzame besturing. Met zijn 4-kanaals besturing is de MFX Racer ook zeer aerobatisch, met grote loopings, snelle rollen, knife edge, snaps en spins, de MFX Racer kan het allemaal en nog veel meer, zijn enige limiet ben jij de piloot! De MFX heeft 2 vleugelopties (beide worden meegeleverd in de doos), een standaard 815mm optie, of de 715mm clipped wing optie. De standaard vleugelopstelling geeft een veel betere klimsnelheid, terwijl de geknipte vleugelopstelling de rolsnelheid drastisch verhoogt.

Avios continues to bring you great flying, and high-quality RC models of interesting subjects, this theme continues with the Avios Twin Otter STOL (Short Takeoff and Landing) twin-engine plane. The Avios model captures the looks and great flying characteristics of the full-size inspired Twin Otter. The impressive power-to-weight ratio and light wing loading makes for exceptional low-speed handling and STOL flight characteristics.

The Avios Twin Otter is also crammed full of outstanding features, these include a set of large barn door style flaps, counter-rotating props for improved handling, scale outline with detailed surface finish, and scale plastic parts. Other features include a fully sprung, all metal CNC nose strut with servo saver, low bounce soft foam oversized bush wheels, and day bright LED lights throughout.

The list of outstanding features goes on with a set of floats included, these are easily fitted in place of the tricycle landing gear so that you can have even more fun flying from lakes and rivers. The included Aerostar RVS speed controllers make flying from water on the floats so much easier, they allow you to maneuver and taxi even in the more challenging conditions and situations that can be found on inland waters. To further help when flying with the floats fitted are a pair of optional tail fins, these increase the yaw stability caused by the extra drag of the floats. Avios have also included two magnetically held interchangeable nose sections, one short to emulate the "Series 100" Twin Otter, and one long so that you can quickly change the look of your Twin Otter to a "Series 200".