Vliegtuig

This fantastic-looking XFly 80mm EDF jet is a detailed scale model of a US Airforce T-7A Red Hawk advanced trainer. It is packed full of scale details including molded-in panel lines, simulated antenna, pitot tube, a crystal clear canopy with cockpit detail, missiles, drop tanks, and much more. Scale features include servoless retracts with CNC machined scale, sprung oleos and sequenced gear doors, functional LED nav and landing lights, full-flying horizontal stabs, and operational flaps.

The XFLY Partenavia P68 is a small, semi-scale twin-engined model that is perfect for flying in small areas such as local parks, sports fields, etc. It has been designed to be extremely easy to fly and assemble, which makes it perfect as an entry-level choice for the novice pilot. The design is based on the full-size Partenavia P68 which is a 6-seater, twin-engined high-wing monoplane that is generally used for light transport and training.

The XFLY Eagle Twin is an innovative racing model with twin EDF motors on each wing tip, this is a radical configuration and allows for a large area in the middle of the fuselage for batteries, and other equipment. The included power system gives a power-to-weight ratio of over 1:15 which allows for easy hand-launching and an incredible performance. Top speeds of over 110mph are achievable and a special EDF mixing configuration makes the Eagle capable of performing differential maneuvers including flat spins, inverted flat spins, and other challenging aerobatic maneuvers.

The XFLY Eagle Twin is an innovative racing model with twin EDF motors on each wing tip, this is a radical configuration and allows for a large area in the middle of the fuselage for batteries, and other equipment. The included power system gives a power-to-weight ratio of over 1:15 which allows for easy hand-launching and an incredible performance. Top speeds of over 110mph are achievable and a special EDF mixing configuration makes the Eagle capable of performing differential maneuvers including flat spins, inverted flat spins, and other challenging aerobatic maneuvers.

The Dancing Wings Hobby Fokker Eindecker III is a scale model of the famous World War 1 monoplane fighter. The kit comes almost ready to fly and is constructed in balsa for a strong, lightweight, authentic structure. A lot of scale detail is supplied including, a dummy engine, scale wheels, and a dummy machine gun, plus a full accessory kit is also supplied which includes all the necessary hardware including scale rigging to complete the kit.

The Dancing Wings Hobby S.E.5A is a detailed scale model of the famous World War 1 biplane fighter. The kit comes almost ready to fly and is constructed in balsa for a strong, lightweight, authentic structure. A lot of scale detail is supplied including, scale exhausts, scale wheels, and a dummy machine gun, plus a full accessory kit is also supplied which includes all the necessary hardware including scale rigging to complete the kit.

We have all had to start learning to fly an RC model at some point, and a stable, high-wing trainer that is very forgiving is what is required. The Dancing Wings Hobby Vogee-16 Trainer is the perfect choice for the rookie pilot. It has a large, flat-bottomed wing with dihedral which enables it to fly very slowly, and it has the stability to sort itself out if you get in a muddle. The Vogee's flying characteristics are very benign, beginners tend to over-control, and the Vogee is very gentle in its handling, especially if you install one of the readily available 3-axis gyros that are available on the market these days. It also has a tricycle landing gear with a steerable nosewheel which really helps with the take-offs and landings. This version of the Vogee is supplied with a powerful 2817-900KV brushless motor, a 60A brushless ESC, an 11" prop, 2 x 37g servos, and 2 x 17g 

The Dancing Wings Hobby Stick-14T 3D aerobatic trainer is the perfect choice for intermediate and experienced RC pilots alike. It is based on the classic stick design and is quite capable of all the usual aerobatic maneuvers, plus with the right power train, it doubles up as the perfect 3D trainer. It has a very wide speed range, it is just as happy flying slowly as it is screaming about the sky. For added fun and enjoyment, the strip ailerons are split halfway making for outboard ailerons and inboard flaps. This allows for really slow or steep approach landings, and if the flaps are mixed in with your other controls it allows you to customize the handling to suit your own flying style. 

The Dancing Wings Hobby Cute Girl laser cut balsa kit captures the type of vintage model airplane that was used in the early days of RC with radio assist. It has that classic retro look, lots of wing dihedral, band on wings, a large cabin, classic shapes to the wings and empennage, and tail dragger landing gear, all the features required for a retro classic look.

The controls are just basic 3 channels, rudder, elevator, and motor control, this keeps things nice and simple. We recommend that you power the Cute Girl with a brushless motor set-up. However, a nitro or a diesel engine can be used for that even more authentic vintage look and classic soundtrack.

The Dancing Wings Hobby Savage Bobber is a small, lightweight foam model that is quick and simple to build. The full-size Savage Bobber was devised by the Zlin Aviation Company. The Bobber as in the motorcycle world means that it is a stripped-down, customized version of an original. The Savage Bobber is a stripped-down, customized version of its older brother the Savage Classic. It is lighter, more maneuverable, and has a slightly narrower fuselage, and the absence of covering to the rear of the fuselage greatly improves the crosswind handling.

The model is reasonably straightforward to assemble, it is manufactured in pre-painted high-quality EPP foam sheet for the majority of the construction, tough plastic for the open framework rear fuselage, and lightweight balsa for the internal structure. Carbon strips are also included to reinforce and improve the stiffness of the structure. It builds up quickly into a good-looking, fun-to-fly lightweight (only 98g) sports plane that is perfect for indoor or park flying. This ARF kit is supplied with a powerful 1108-4000KV brushless motor, 5A brushless ESC, 5" propeller, and 4 x 2g servos.

The Dancing Wings Hobby Shining is a large lightweight profile-style foam kit that is quick and simple to build. It has been designed to be the perfect introduction to 3D flying and will perform extreme 3D maneuvers such as waterfalls, harriers, knife-edge loops, rolling circles, and much more.

The model is very straightforward to assemble, it is manufactured in pre-painted high-quality EPP foam sheet for the majority of the construction so the parts count is quite low, and carbon strips are supplied for strengthening. It builds up quickly into a good-looking, fun-to-fly lightweight extreme sport 3D plane that is perfect for park flying and on playing fields. This ARF model is supplied with a powerful 2216-950KV brushless motor, 30A brushless ESC, 10" propeller, and 4 x 9g servos.

Deze kleine kit duurt ongeveer 4 uur op te bouwen en zal voldoen aan de gashendel jocky in ieder van ons!

De flycat wordt geleverd met 56mm EDF en je zal een 25A ESC & 4800kv inrunner nodig.

Dit vliegtuig is extreem snel, (meer dan 100 mph!), Maar nog steeds stabiel op langzame vlucht.

Spec.
Spanwijdte: 640mm
Lengte: 800mm
Gewicht: 290g
BESC: 25A (niet inbegrepen)
Motor: 4800kv 20-30 size Inrunner (niet inbegrepen)
LiPoly: 1300mAh 11.1V 20C (niet inbegrepen)

Vereist.
Motor & ESC
3 x 9g Servo
5 of 10 min epoxy (Araldite)
1 x Servo Y lood
1 x Servo Extention lood
12AWG Silicon draad (20cm Voor motor ESC)
1300mAh 11.1V 20C lipo batterij
Uw eigen ontvanger en zender

Onze vlucht rapport.

Kit past goed samen, licht schuren van de voorste en achterste randen die nodig is om extra schuim te verwijderen. We kozen ervoor om niet het versterken van de vleugel met CF slangen, die niet hielpen blijken te zijn een probleem, zelfs op volle snelheid hoge G draait.

We kozen voor de BESC monteren waarbij de batterij gebied, in het geval dat de batterij nodig naar voren te worden verplaatst naar CofG aan te passen, maar dit was niet nodig.

EDF werd gemonteerd op de stick mount. Stick mount werd verkort, met de extra stuk gebruikt om het EOF te verhogen van de stick om het EOF lijkwade te wissen. 2 bouten hield de ventilator aan de stok, een voor en een na de ventilatorbladen.

Eerste vlucht.

We hielden CofG 9,5 cm van de top van de vleugels leading edge. De flycat werd met de hand gelanceerd op 3/4 gasklep, snel accelereren. Tot onze verbazing, was er geen trimmen nodig.

De flycat is een uiterst snelle kit om te vliegen, en vergde veel van de lift in de bochten. Wij stellen voor de invoering van de lift op maximale gooit. Het vergt enorme hoeveelheden lift tijdens de bochten!

Kortom een ​​uitstekende vlak dat soepel flys, zelfs op winderige dagen.

Wij stellen voor een goede lipo pack, zoals deze kleine hotty zal kauwen door een 1500mAh in slechts 5 minuten. We gebruikten de ZIPPY-R 1800mAh 22C 3s1p pack voor ongeveer 8 minute vluchten. Vergeleken met de ZIPPY Q-pakket met ons korte ongeveer 7 minuten gebracht.

P-51D Shangri La - Vervanging Horizontal Tail

Super Kinetic - Vervanging Motor Mount

Super Kinetic - Vervanging Canopy

Super Kinetic - Vervanging Controle Wire - Staal (Met Bal verwijzing)

Super Kinetic - Vervanging Decals (2pcs / set)

Durafly ™ SkyMule 1500mm - Bottom Servo Hatch

HobbyKing® Bix3 Trainer 1550mm - Vervanging Wheel Pant Set

HobbyKing® Bix3 Trainer 1550mm - Vervanging Landing Gear

HobbyKing® Bix3 Trainer 1550mm - Vervanging Tail Wheel

HobbyKing® Bix3 Trainer 1550mm - Vervanging Controle Rod Set

HobbyKing® Bix3 Trainer 1550mm - Vervanging Prop Adapter

HobbyKing ™ Wingnetic 805mm - Vervanging Romp

HobbyKing ™ Bix3 Trainer 1550mm - Vervanging Wing Spar

HobbyKing ™ Bix3 Trainer 1550mm - Vervanging Wing Bolts

2 Pieces Inbegrepen

Hobbyking ™ Super-G Autogiro - Blade Grip Bouten

Inclusief 3 stuks

HobbyKing Hall Cherokee Glider 1700mm - Romp Set

EPO Romp met decals, plastic. regelstaven

Durafly ™ EFX Racer - Vervanging Fuselage (Yellow)

Durafly ™ EFX Racer - vervangende batterij Hatch (Rood)

Durafly ™ EFX Racer - vervangende batterij Hatch (Geel)

Durafly ™ EFX Racer - Vervanging Horizontale Stabilizer

Durafly ™ EFX Racer - Vervanging Cowl (Geel)

Durafly ™ EFX Racer - Vervanging Plastic Underbody Skid

Avios Yakovlev Yak-52 HobbyKing Scheme Replacement Canopy.