Vliegtuig

A replacement flap hinge and control horn set for the Avios Grand Tundra 2 1700mm.

A replacement wing and tail carbon spar set for the Avios Grand Tundra 2 1700mm.

A replacement main landing gear mounting plate for the Avios Grand Tundra 2 1700mm.

A replacement decal set for the Avios Grand Tundra 2 1700mm.

A replacement wing servo connector set for the Avios Grand Tundra 2 1700mm.

An optional 16x8 prop when using a 4S setup for the Avios Grand Tundra 2 1700mm.

A replacement 15x8 propeller for the Avios Grand Tundra 2 1700mm.

A complete replacement main landing gear set for the Avios Grand Tundra 2 1700mm.

A replacement fuselage for the 680mm Green/White Durafly Rare Bear Reno Racer with dummy engine and screws. 

A replacement main wing for the 680mm Gold/White Durafly Rare Bear Reno Racer with aileron servo pushrods, covers, horns, and screws. 

A replacement main wing for the 680mm Green/White Durafly Rare Bear Reno Racer with aileron servo pushrods, covers, horns, and screws. 

A replacement horizontal stabilizer for both color versions of the 680mm Durafly Rare Bear Reno Racer with elevator pushrod, control horn, and screw. 

A replacement vertical stabilizer for both color versions of the 680mm Durafly Rare Bear Reno Racer with rudder pushrod, control horn, and screw.

A replacement canopy/battery hatch for the Gold/White 680mm Durafly Rare Bear Reno Racer. 

A replacement canopy/battery hatch for the Green/White 680mm Durafly Rare Bear Reno Racer. 

A replacement spinner for both color versions of the 680mm Durafly Rare Bear Reno Racer. 

A replacement 3536-1700KV brushless motor for both color versions of the 680mm Durafly Rare Bear Reno Racer with X-mount, screws, and prop adapter.

A replacement X-motor mount for both color versions of the 680mm Durafly Rare Bear Reno Racer. 

A replacement prop adapter with screws for both color versions of the 680mm Durafly Rare Bear Reno Racer. 

A replacement 8x5 propeller with shaft adapters for both color versions of the 680mm Durafly Rare Bear Reno Racer.

A replacement 60A Aerostar LITE with XT60 and 3.5mm connectors for both color versions of the 680mm Durafly Rare Bear Reno Racer. 

A replacement accessory pack for both color versions of the 680mm Durafly Rare Bear Reno Racer.

The pack includes the following:
4 x Pushrods w/ballinks
3 x Control horns
Assorted screws, bolts, and nuts

A replacement decal set for the Gold/White 680mm Durafly Rare Bear Reno Racer. 

A replacement decal set for the Green/White 680mm Durafly Rare Bear Reno Racer. 

The highly detailed FLYWING Bell 206 V3 is packed full of features, the first thing, being ready to fly is that it comes with its own dedicated transmitter. This high-precision 10-channel transmitter has a range of more than 1km and is perfectly matched to the Bell 206, there is no setting up, it is all done for you. At the heart of the Bell 206 is the H1 M10N positioning system, this is a high-precision IMU attitude calculation unit with barometer and GPS. This will allow the helicopter to hover over fixed points with no input from the pilot, and there is also a return to home and low battery return function. The H1 M10N uses intuitive, easy-to-use software that will allow you to adjust all the parameters via your PC so that you can fine-tune the flying characteristics to your liking.

The highly detailed FLYWING Bell 206 V4 is packed full of features, the first thing, being ready to fly is that it comes with its own dedicated transmitter. This high-precision 10-channel transmitter has a range of more than 1km and is perfectly matched to the Bell 206, there is no setting up, it is all done for you. Secondly, this version comes with a realistic, aluminum alloy 4-blade rotor hub and a metal swashplate. This offers both high precision, and high strength, and due to its specially designed geometry, it provides incredible stable flight. At the heart of the Bell 206 is the H1 M10N positioning system, this is a high-precision IMU attitude calculation unit with barometer and GPS. This will allow the helicopter to hover over fixed points with no input from the pilot, and there is also a return to home and low battery return function. The H1 M10N uses intuitive, easy-to-use software that will allow you to adjust all the parameters via your PC so that you can fine-tune the flying characteristics to your liking.

The highly detailed upgraded version FLYWING Bell UH-1 Huey V4 is packed full of features, the first thing, being ready to fly is that it comes with its own dedicated transmitter. This high-precision 10-channel transmitter has a range of more than 1km and is perfectly matched to the UH-1, there is no setting up, it is all done for you. At the heart of the UH-1 is the H1 M10N positioning system, this is a high-precision IMU attitude calculation unit with barometer and GPS. This will allow the helicopter to hover over fixed points with no input from the pilot, and there is also a return to home and low battery return function. The H1 M10N uses intuitive, easy-to-use software that will allow you to adjust all the parameters via your PC so that you can fine-tune the flying characteristics to your liking.

The all-metal rotor head is made of precision components for durability and precise controllability. Power is supplied to the main rotor by a 16V 3508 brushless motor, and flight times with the supplied 4S 3000mAh battery can be up to 20 minutes. The Bell UH-1 Huey also features a 60A, 32-bit processor ESC, fast, metal-geared servos, and a high-speed brushless tail motor with a specially designed high-efficiency tail rotor.

This upgraded version includes the latest flight control algorithms, automatic compass calibration, fitted windows, and applied decals. All in all, the scale FLYWING Bell UH-1 Huey V4 smart helicopter is a must-have for all pilots from beginners to experts alike, it has the ability to be a very stable training platform or a very smooth, great-looking scale model. Order yours today and join the rest of the very satisfied owners who are having fun with their FLYWING Bell UH-1 Huey.

FLYWING Bell 206/UH-1 Replacement FL402 Main Shaft.

FLYWING Bell 206/UH-1 Replacement FL413 Swashplate Linkage Set.

FLYWING Bell 206/UH-1 Replacement FL443 Servo Arm Set.

FLYWING Bell 206/UH-1 Replacement FL443 Servo.

FLYWING Bell 206/UH-1 Replacement FL453 Main Shaft Retaining Collet.

FLYWING Bell 206/UH-1 Replacement FS08 Feathering Shaft.

FLYWING Bell 206/UH-1 Replacement FS14 Aluminum Brace.

FLYWING Bell 206/UH-1 Replacement FS25 Main Blades (1 pair).