Controladores de Velocidad Electrónicos

Especificaciones:
Corriente constante: 90A
Corriente de explosión: 120A
Batería: LiPo 2-6S
BEC: 5.5v / 4A
Tipo de motor: sin escobillas sin sensor
Enfriamiento: refrigerado por agua
Tamaño: 87 x 38 x 22mm
Peso: 105g

Funciones de programación:
Modo de funcionamiento: avance con freno / avance y retroceso con freno / avance y retroceso
Aceleración: 6% / 9% / 12%
Protección de bajo voltaje: Ninguno / 2.6V / 2.8V / 3.0V / 3.2V / 3.4V
Modo de inicio (puñetazo): Nivel 1 / Nivel 2 / Nivel 3 / Nivel 4 / Nivel 5 / Nivel 6 / Nivel 7 / Nivel 8 / Nivel 9
Fuerza inversa: 25% / 50% / 75% / 100%
Sincronización: 0° / 5° / 10° / 15° / 20° / 25° / 30° / Automático

Tarjeta de programación HobbyKing ESC

Se adapte a las siguientes CES HobbyKing

Manía Rey 120A ESC 4A UBEC
Manía Rey 80A ESC 4A SBEC
Manía rey 60A ESC 4A UBEC
Manía Rey 40A UBEC 4A
Manía Rey 30A ESC 3A UBEC
Manía Rey 20A ESC 3A UBEC

Ver artículos relacionados a continuación.

Este ESC cepillado 45A es un excelente reemplazo para el ESC original de su modelo o para configurar un nuevo sistema de energía cepillado en su automóvil o camión. Cuenta con un corte de bajo voltaje para usar con baterías LiPo. Su diseño compacto y liviano lo hace ideal para usar en carros de deriva a escala 1/10 que utilizan motores cepillados.


Caracteristicas:
• Corte de bajo voltaje para usar con baterías LiPo
• Diseño compacto y ligero
• BEC de 5,6 V / 2 A


Especificaciones:
Corriente continua: 45A
Corriente de explosión: 320 A (10 segundos)
Coche adecuado: 1/10 dentro y fuera de la carretera
Batería: LiPo de 2 celdas (5-6 celdas NI-xx)
Salida BEC: modo de conmutación 5.6V / 2A incorporado
Tipo de motor: cepillado
Operación: avance / freno / retroceso
Dimensión: 38x28x22mm
Peso: 40g

El HobbyKing ladrillo rojo ESC s suele ganar el primer lugar por el estilo, a pesar de que tomarán los mejores puntos para la simplicidad y fiabilidad. Con un conjunto básico de características de programación ESC estos s son una solución perfecta para aquellos que buscan un controlador básico pero robusto velocidad.

El ladrillo rojo ESC s han sido diseñados con la disipación de calor en mente. Con más de calor de aluminio de tamaño hunde el ladrillo rojo ESC s son ligeramente más grandes que muchos ESC s en su clase, sin embargo este compromiso de tamaño tiene por objeto ayudar a eliminar los problemas asociados con el sobrecalentamiento.

caracteristicas:
• la respuesta del acelerador suave y lineal
• Utiliza potente y de alto rendimiento MCU
• Funciones de autoprotección múltiples: entrada de tensión anormal, protección de batería baja, sobre la protección térmica, la pérdida de señal del acelerador
• Programable vía palanca de gas (ver instrucciones de la sección "Archivos" ficha)

Especificaciones:
Corriente constante: 70A
Max Burst corriente: 90A
Voltaje de entrada: 2 ~ 7S (7,4 ~ 25,9), 6 ~ 20 NiCd / NiMH
BEC: 5 V / 5 A
Dimensiones: 60x35x18mm
Peso: 70g
Servo de ejecución: Tipo JR

El HobbyKing ladrillo rojo ESC s suele ganar el primer lugar por el estilo, a pesar de que tomarán los mejores puntos para la simplicidad y fiabilidad. Con un conjunto básico de programación cuenta con estos ESC s son una solución perfecta para aquellos que buscan un controlador básico pero robusto velocidad.

El CES ladrillo rojo ha sido diseñado con la disipación de calor en mente. con un disipador de calor sobre aluminio de tamaño de los FET y y disipador de calor individuales para el MCU del ladrillo rojo esc es ligeramente más grande que muchos ESC s de su clase, sin embargo este compromiso de tamaño tiene por objeto ayudar a eliminar los problemas asociados con el sobrecalentamiento.

caracteristicas:
• la respuesta del acelerador suave y lineal
• Utiliza potente y de alto rendimiento MCU
• Funciones de autoprotección múltiples: entrada de tensión anormal, protección de batería baja, sobre la protección térmica, la pérdida de señal del acelerador
• Crecer con seguridad, el motor no se extenderá hasta el CES está armado correctamente

Especificaciones.
Max Amp: 200A
UBEC: 5V / 5A
Células: 2 ~ 7.4 ~ 25.9V 7S LIPOLY
Tamaño: 65x40x26mm
Peso: 128 g

Especificaciones:
Corriente constante: 50A
Burst actual: 70A
Batería: 2-6S Lipo
BEC: 5.5v / 4A
Tipo de motor: sin escobillas sin sensores
Refrigeración: Watercooled
Tamaño: 87 x 38 x 22 mm
Peso: 105 g

Funciones de programación:
Modo de servicio: Adelante con freno / avance y retroceso con / Adelante freno y marcha atrás
Aceleración: 6% / 9% / 12%
Protección de baja tensión: Ninguno / 2.6V / 2.8V / 3.0V / 3.2V / 3.4V
Iniciar el modo (el puño): Nivel 1 / Nivel 2 / Nivel 3 / Nivel 4 / Nivel 5 / Nivel 6 / Nivel 7 / Nivel 8/9 Nivel
Fuerza inversa: 25% / 50% / 75% / 100%
Tiempo: 0 ° / 5 ° / 10 ° / 15 ° / 20 ° / 25 ° / 30 ° / Automático

HobbyKing 1875mm B-17 F / G fortaleza del vuelo (V2) - Sustitución 20A ESC

The QUICRUN series of ESCS is the latest range of competitively priced brushed and brushless Speed Controllers for use in a wide range of RC vehicle applications. 

The QuicRun WP 1625 is specially designed for beginners and intermediate modelers.

Make the most of your RC boat with this powerful ESC. Designed with a high performance MCU, the circuit design ensures strong anti-interference and intelligent technology. The waterproof design features fast throttle response, smooth speed control linearity, and programmable start mode.

Make the most of your RC boat with this powerful ESC. Designed with a high performance MCU, the circuit design ensures strong anti-interference and intelligent technology. The waterproof design features fast throttle response, smooth speed control linearity, and a low-voltage protection threshold.

Aproveche al máximo su barco RC con este potente ESC. Diseñado con un MCU de alto rendimiento, el diseño del circuito garantiza una fuerte tecnología antiinterferente e inteligente. El diseño resistente al agua presenta una respuesta de aceleración rápida, un control de aceleración lineal suave y un modo de arranque programable.

Make the most of your RC boat with this powerful ESC. Designed with a high performance MCU, the circuit design ensures strong anti-interference and intelligent technology. The waterproof design features fast throttle response, smooth speed control linearity, and a low-voltage protection threshold.

Aproveche al máximo su barco RC con este potente ESC. Diseñado con un MCU de alto rendimiento, el diseño del circuito garantiza una fuerte tecnología antiinterferente e inteligente. El diseño resistente al agua presenta una respuesta de aceleración rápida, un control de aceleración lineal suave y un modo de arranque programable.

Program your Turnigy Marine ESCs with this high-quality program card. Easy to use, this handy program card covers all your basic features and more. Select your Running Mode to ensure your ESCs operate forwards or backwards. The program card also allows you to choose your motor direction, low voltage protection threshold, timing set and start mode.

The AeroStar WiFi Connect offers an easier way to program an AeroStar WiFi electronic speed controller (ESC). This controller connects to your ESC via your Android phone or iOS device using WIFI to make it simple to configure and monitor your ESC.

For Android users you need to use this link and download the Android APK: https://drive.google.com/file/d/1Tkev-d0ggqEVN9QZy86MJ4tL8nVJDWdv/view

For iOS users you will need to download it via the Apple Store, APP name: Flycolor Configurator

The QUICRUN 880 Dual ESC is a durable, highly reliable waterproof electronic speed controller that has been designed for twin brushed motors in 1/10 and 1/8th scale vehicles. The HobbyWing patented copper heat conductive plates attached to the MOSFET board allows the internal heat to be quickly transferred to the aluminum heatsink for faster and greater heat dissipation.

The motor is a powerful, high torque open brush gear 540 motor, brushes can be changed when they wear out and this is matched to a 60amp ESC. The Trackstar Crawler ESC has been specifically designed for RC crawlers and brushed motors. It gives an excellent linear response and driving feel, has a low internal resistance, excellent heat dissipation, and multiple protection features (see features below). It can be easily programmed with the optional pocket-sized LED program card (see related items) with a variety of different settings including; Initial Start Force, Low Voltage Cut-Off, Initial Drag Brake Force, Maximum Reverse Force, and 3 Start Modes.

The motor is a powerful, high torque open brush gear 540 motor, brushes can be changed when they wear out and this is matched to a 60amp ESC. The Trackstar Crawler ESC has been specifically designed for RC crawlers and brushed motors. It gives an excellent linear response and driving feel, has a low internal resistance, excellent heat dissipation, and multiple protection features (see features below). It can be easily programmed with the optional pocket-sized LED program card (see related items) with a variety of different settings including; Initial Start Force, Low Voltage Cut-Off, Initial Drag Brake Force, Maximum Reverse Force, and 3 Start Modes.

The motor is a powerful, high torque open brush gear 540 motor, brushes can be changed when they wear out and this is matched to a 60amp ESC. The Trackstar Crawler ESC has been specifically designed for RC crawlers and brushed motors. It gives an excellent linear response and driving feel, has a low internal resistance, excellent heat dissipation, and multiple protection features (see features below). It can be easily programmed with the optional pocket-sized LED program card (see related items) with a variety of different settings including; Initial Start Force, Low Voltage Cut-Off, Initial Drag Brake Force, Maximum Reverse Force, and 3 Start Modes.

The motor is a powerful, high torque open brush gear 540 motor, brushes can be changed when they wear out and this is matched to a 60amp ESC. The Trackstar Crawler ESC has been specifically designed for RC crawlers and brushed motors. It gives an excellent linear response and driving feel, has low internal resistance, excellent heat dissipation and multiple protection features (see features below). It can be easily programmed with the optional pocket sized LED program card (see related items) with a variety of different settings including; Initial Start Force, Low Voltage Cut-Off, Initial Drag Brake Force, Maximum Reverse Force and 3 Start Modes.

The pocket sized Trackstar LED program card has been specifically designed to work with the brushed Trackstar crawler ESCs. It is very easy and intuative to use and makes the programming of the Trackstar brushed ESC's a simple matter.

A pair of replacement Aerostar 40A ESCs with wiring and connectors for the AVIOS KingTwin 1700.

The Turnigy Plush-32 brushless ESC comes with a 32-bit ARM controller which offers higher resolution, makes it quicker, smoother, and more responsive to your throttle inputs. As you would expect, all the Turnigy Plush-32 are manufactured to the same high-quality standards that you have come to expect with all the Turnigy Plush ESCs.

The Turnigy Plush-32 brushless ESC comes with a 32-bit ARM controller which offers higher resolution, makes it quicker, smoother, and more responsive to your throttle inputs. As you would expect, all the Turnigy Plush-32 are manufactured to the same high-quality standards that you have come to expect with all the Turnigy Plush ESCs.

Now with the updated Rev1.1.0 firmware, these speed controllers offer a few more programming options over previous models. These include motor type, spool-up acceleration, PWM frequency, beacon delay, and an adjustable BEC (this is only available on the 150A). Most of these revisions are self-explanatory but the "Beacon Delay" does require an explanation. The "Beacon Delay" is quite a unique function that will cause the ESC to start "beeping" after a predetermined delay of not using the throttle stick, this can be set via the program card. The loud beeping noise is perfect for finding your model if it gets lost in high grass, standing crops, or in the bush, etc. Please note that you can use your existing Plush 32 programming card but you will not be able to access the revised functions unless you purchase the new Rev1.1.0 programming card.

The Turnigy Plush-32 brushless ESC comes with a 32-bit ARM controller which offers higher resolution, makes it quicker, smoother, and more responsive to your throttle inputs. As you would expect, all the Turnigy Plush-32 are manufactured to the same high-quality standards that you have come to expect with all the Turnigy Plush ESCs.

Now with the updated Rev1.1.0 firmware, these speed controllers offer a few more programming options over previous models. These include motor type, spool-up acceleration, PWM frequency, beacon delay, and an adjustable BEC (this is only available on the 150A). Most of these revisions are self-explanatory but the "Beacon Delay" does require an explanation. The "Beacon Delay" is quite a unique function that will cause the ESC to start "beeping" after a predetermined delay of not using the throttle stick, this can be set via the program card. The loud beeping noise is perfect for finding your model if it gets lost in high grass, standing crops, or in the bush, etc. Please note that you can use your existing Plush 32 programming card but you will not be able to access the revised functions unless you purchase the new Rev1.1.0 programming card.

The Turnigy Plush-32 brushless ESC comes with a 32-bit ARM controller which offers higher resolution, makes it quicker, smoother, and more responsive to your throttle inputs. As you would expect, all the Turnigy Plush-32 are manufactured to the same high-quality standards that you have come to expect with all the Turnigy Plush ESCs.

Now with the updated Rev1.1.0 firmware, these speed controllers offer a few more programming options over previous models. These include motor type, spool-up acceleration, PWM frequency, beacon delay, and an adjustable BEC (this is only available on the 150A). Most of these revisions are self-explanatory but the "Beacon Delay" does require an explanation. The "Beacon Delay" is quite a unique function that will cause the ESC to start "beeping" after a predetermined delay of not using the throttle stick, this can be set via the program card. The loud beeping noise is perfect for finding your model if it gets lost in high grass, standing crops, or in the bush, etc. Please note that you can use your existing Plush 32 programming card but you will not be able to access the revised functions unless you purchase the new Rev1.1.0 programming card.

The Turnigy Plush-32 brushless ESC comes with a 32-bit ARM controller which offers higher resolution, makes it quicker, smoother, and more responsive to your throttle inputs. As you would expect, all the Turnigy Plush-32 are manufactured to the same high-quality standards that you have come to expect with all the Turnigy Plush ESCs.

The Turnigy Plush-32 brushless ESC comes with a 32-bit ARM controller which offers higher resolution, makes it quicker, smoother, and more responsive to your throttle inputs. As you would expect, all the Turnigy Plush-32 are manufactured to the same high-quality standards that you have come to expect with all the Turnigy Plush ESCs.

Now with the updated Rev1.1.0 firmware, these speed controllers offer a few more programming options over previous models. These include motor type, spool-up acceleration, PWM frequency, beacon delay, and an adjustable BEC (this is only available on the 150A). Most of these revisions are self-explanatory but the "Beacon Delay" does require an explanation. The "Beacon Delay" is quite a unique function that will cause the ESC to start "beeping" after a predetermined delay of not using the throttle stick, this can be set via the program card. The loud beeping noise is perfect for finding your model if it gets lost in high grass, standing crops, or in the bush, etc. Please note that you can use your existing Plush 32 programming card but you will not be able to access the revised functions unless you purchase the new Rev1.1.0 programming card.

The Turnigy Plush-32 brushless ESC comes with a 32-bit ARM controller which offers higher resolution, makes it quicker, smoother, and more responsive to your throttle inputs. As you would expect, all the Turnigy Plush-32 are manufactured to the same high-quality standards that you have come to expect with all the Turnigy Plush ESCs.

Now with the updated Rev1.1.0 firmware, these speed controllers offer a few more programming options over previous models. These include motor type, spool-up acceleration, PWM frequency, beacon delay, and an adjustable BEC (this is only available on the 150A). Most of these revisions are self-explanatory but the "Beacon Delay" does require an explanation. The "Beacon Delay" is quite a unique function that will cause the ESC to start "beeping" after a predetermined delay of not using the throttle stick, this can be set via the program card. The loud beeping noise is perfect for finding your model if it gets lost in high grass, standing crops, or in the bush, etc. Please note that you can use your existing Plush 32 programming card but you will not be able to access the revised functions unless you purchase the new Rev1.1.0 programming card.

The Turnigy Plush-32 brushless ESC comes with a 32-bit ARM controller which offers higher resolution, makes it quicker, smoother, and more responsive to your throttle inputs. As you would expect, all the Turnigy Plush-32 are manufactured to the same high-quality standards that you have come to expect with all the Turnigy Plush ESCs.

Now with the updated Rev1.1.0 firmware, these speed controllers offer a few more programming options over previous models. These include motor type, spool-up acceleration, PWM frequency, beacon delay, and an adjustable BEC (this is only available on the 150A). Most of these revisions are self-explanatory but the "Beacon Delay" does require an explanation. The "Beacon Delay" is quite a unique function that will cause the ESC to start "beeping" after a predetermined delay of not using the throttle stick, this can be set via the program card. The loud beeping noise is perfect for finding your model if it gets lost in high grass, standing crops, or in the bush, etc. Please note that you can use your existing Plush 32 programming card but you will not be able to access the revised functions unless you purchase the new Rev1.1.0 programming card.

The Turnigy Plush-32 brushless ESC comes with a 32-bit ARM controller which offers higher resolution, makes it quicker, smoother, and more responsive to your throttle inputs. As you would expect, all the Turnigy Plush-32 are manufactured to the same high-quality standards that you have come to expect with all the Turnigy Plush ESCs.

Now with the updated Rev1.1.0 firmware, these speed controllers offer a few more programming options over previous models. These include motor type, spool-up acceleration, PWM frequency, beacon delay, and an adjustable BEC (this is only available on the 150A). Most of these revisions are self-explanatory but the "Beacon Delay" does require an explanation. The "Beacon Delay" is quite a unique function that will cause the ESC to start "beeping" after a predetermined delay of not using the throttle stick, this can be set via the program card. The loud beeping noise is perfect for finding your model if it gets lost in high grass, standing crops, or in the bush, etc. Please note that you can use your existing Plush 32 programming card but you will not be able to access the revised functions unless you purchase the new Rev1.1.0 programming card.

The Turnigy Plush-32 brushless ESC comes with a 32-bit ARM controller which offers higher resolution, makes it quicker, smoother, and more responsive to your throttle inputs. As you would expect, all the Turnigy Plush-32 are manufactured to the same high-quality standards that you have come to expect with all the Turnigy Plush ESCs.

Now with the updated Rev1.1.0 firmware, these speed controllers offer a few more programming options over previous models. These include motor type, spool-up acceleration, PWM frequency, beacon delay, and an adjustable BEC (this is only available on the 150A). Most of these revisions are self-explanatory but the "Beacon Delay" does require an explanation. The "Beacon Delay" is quite a unique function that will cause the ESC to start "beeping" after a predetermined delay of not using the throttle stick, this can be set via the program card. The loud beeping noise is perfect for finding your model if it gets lost in high grass, standing crops, or in the bush, etc. Please note that you can use your existing Plush 32 programming card but you will not be able to access the revised functions unless you purchase the new Rev1.1.0 programming card.

The Plush-32 Brushless ESC programming card is designed to make life easy. No more listening to the beeps, and guessing when to move your throttle to make changes to your ESC settings. This programming card changes settings with the press of a button, and easy-to-read LED’s let you know exactly how your ESC has been programmed. This programming card is a must for your Plush-32 series brushless ESC.

Now with the updated Rev1.1.0 firmware, this program card offers a few more programming options over previous models. These include motor type, spool-up acceleration, PWM frequency, beacon delay, and an adjustable BEC (this is only available for the 150A ESC). Most of these revisions are self-explanatory but the "Beacon Delay" does require an explanation. The "Beacon Delay" is quite a unique function that will cause the ESC to start "beeping" after a predetermined delay of not using the throttle stick, this delay can be set from between 1 and 10mins using this program card. The loud beeping noise is perfect for finding your model if it gets lost in high grass, standing crops, or in the bush, etc. Please note that you can use this programming card to program earlier versions of the Plush 32 series but only ESC's with the Rev1.1.0 firmware will show the revised functions.