Aviones

The Hobbyking H-King Mini L-39 has been developed from an earlier version that had a 50mm fan unit. This latest rendition from RC L39 aircraft sports an uprated 64mm 8-blade EDF fan unit with a 2220-3300KV brushless outrunner motor, a 50A ESC, and uses a 4S LiPo battery instead of the original 3S setup. The full-size L-39 jet was designed in the Czech Republic as a high-performance jet trainer for performing basic to advanced pilot training. It was the first trainer aircraft in the world to be equipped with a turbofan.

Cuando Durafly lanzó el Auto-G original elevó el listón al ser el primer autogiro Plug-N-Fly del mercado, ese listón se ha elevado aún más con el Auto-G2 V2. Manteniendo la tradición Durafly, es rápido y sencillo de montar, vuela extremadamente bien, y tiene un aspecto increíble en vuelo. Las mejoras de la V2 incluyen la adición de una duradera placa de cabeza de nylon reforzado con fibra de 2mm, varillas de empuje reforzadas con fibra, un mástil principal totalmente encapsulado, un tren de aterrizaje más ancho y fuerte con grandes ruedas de espuma ligera tipo bush, y un motor con carenado, además de una electrónica interna más pequeña que da más espacio para la batería de vuelo.

Tras el éxito de la EFX Racer, se decidió producir una versión mini, como se suele decir, todo lo bueno también viene en frasco pequeño, así nació la MFX Racer. El MFX ha sido diseñado con los mismos estándares que sus hermanos mayores y sigue ofreciendo velocidad, fuerza, agilidad y la estabilidad que esperas de un modelo Durafly. Además, obtienes la simplicidad de montaje y la calidad que sólo un modelo EPO de Durafly puede ofrecer.

This beautiful model of a North American T-28 Trojan USAF Military Trainer with brushed 1020 motor, and 3D/6G gyro stabilization system not only looks great, but it flies great as well. The built-in switchable 6-axis gyro flight stabilization system makes it perfect for both beginners and experts alike. It is tough too, it's constructed from durable, crash-resistant EPP foam which is light, extremely strong, and ready to take all the knocks and bangs associated with learning to fly.

This beautiful model of a Grumman F8F Rare Bear Reno Racer with brushed 1020 motor, and 3D/6G gyro stabilization system not only looks great, but it flies great as well. The built-in switchable 6-axis gyro flight stabilization system makes it perfect for both beginners and experts alike. It is tough too, it's constructed from durable, crash-resistant EPP foam which is light, extremely strong, and ready to take all the knocks and bangs associated with learning to fly.

Este pequeño avión de gran aspecto captura la época dorada de la aviación que se caracterizó por los cambios progresivos en los aviones civiles y militares. El Beechcraft D17S Staggerwing es un rápido biplano americano, cortesía de su grande pero ligero motor radial y también fue uno de los primeros en tener una cómoda cabina cerrada de estilo ejecutivo.

Este pequeño avión de gran aspecto captura la época dorada de la aviación que se caracterizó por los cambios progresivos en los aviones civiles y militares. El Beechcraft D17S Staggerwing es un rápido biplano americano, cortesía de su grande pero ligero motor radial y también fue uno de los primeros en tener una cómoda cabina cerrada de estilo ejecutivo.

This fantastic looking XFly 80mm EDF jet is a detailed scale model of the French Air Force Alpha Jet, it is packed full of scale details including molded-in panel lines, a simulated antenna, a crystal clear canopy with cockpit detail, removable gun pod, and much more. Scale features include servoless retracts with CNC machined scale, sprung oleos and sequenced gear doors, functional LED nav and landing lights, operational flaps, and full-flying horizontal stabs. Take your scale flying experience to another level with this impressive 6S-powered XFLY Alpha Jet in a French Air Force color scheme.

This fantastic-looking XFly 80mm EDF jet is a detailed scale model of the Dassault/Dornier Alpha Jet, this version is in the color scheme of the famous Patrouille de France aerobatic team. It is packed full of scale details including molded-in panel lines, a simulated antenna, a crystal clear canopy with cockpit detail, and much more. Scale features include servoless retracts with CNC machined scale, sprung oleos and sequenced gear doors, functional LED nav and landing lights, operational flaps, and full-flying horizontal stabs. Take your scale flying experience to another level with this impressive 6S-powered XFLY Alpha Jet in the classic Patrouille de France color scheme.

The XFLY T-7A Red Hawk 750mm EDF jet is an easy-to-fly, versatile EDF trainer that will appeal to a wide variety of pilots, including those with limited experience in flying EDF jets. The 4S compatible power system includes a 12-bladed 64mm fan unit that delivers ample power for an abundance of thrust, speed, and an incredible turbine-like sound. The full-size Boeing-Saab T-7 Red Hawk (originally known as the Boeing T-X) is an American/Swedish advanced jet trainer that was designed to replace the popular Northrop T-38 Talon. The design is smaller, but very similar to the McDonnell Douglas F/A-18 with its large leading edge root extensions, and V-shaped twin vertical tail design. These design features give the full-size incredible maneuverability and excellent low-speed handling, these attributes carry over extremely well to the XFLY model of the T-7A Red Hawk.

The XFLY Sukhoi Su-27 Flanker 750mm EDF jet is an easy-to-fly, great-looking, and versatile scale EDF model that will appeal to a wide variety of pilots, including those with limited experience in flying EDF jets. The 4S-compatible power system includes twin 12-bladed 50mm fan units that deliver an abundance of power for excellent thrust, loads of speed, and an incredible turbine-like sound. The full-size Sukhoi Su-27 Flanker is a long-range air defense jet fighter that was designed as a direct competitor to the McDonnell Douglas F-14. The swept-back wing configuration gives the Su-27 excellent slow-speed handling and short-field capabilities, but it also allows for high maneuverability at speed. These design attributes carry over extremely well to the XFLY model of the Sukhoi Su-27.

The XFLY Sukhoi Su-27 Flanker 750mm EDF jet is an easy-to-fly, great-looking, and versatile scale EDF model that will appeal to a wide variety of pilots, including those with limited experience in flying EDF jets. The 4S-compatible power system includes twin 12-bladed 50mm fan units that deliver an abundance of power for excellent thrust, loads of speed, and an incredible turbine-like sound. The full-size Sukhoi Su-27 Flanker is a long-range air defense jet fighter that was designed as a direct competitor to the McDonnell Douglas F-14. The swept-back wing configuration gives the Su-27 excellent slow-speed handling and short-field capabilities, but it also allows for high maneuverability at speed. These design attributes carry over extremely well to the XFLY model of the Sukhoi Su-27.

This fantastic-looking XFly 80mm EDF jet is a detailed scale model of a US Airforce T-7A Red Hawk advanced trainer. It is packed full of scale details including molded-in panel lines, simulated antenna, pitot tube, a crystal clear canopy with cockpit detail, missiles, drop tanks, and much more. Scale features include servoless retracts with CNC machined scale, sprung oleos and sequenced gear doors, functional LED nav and landing lights, full-flying horizontal stabs, and operational flaps.

The XFLY Swift 2100 is a versatile electric-powered glider that is quite happy flying fast and doing aerobatics or is equally at home flying slowly and just floating around. To achieve this versatility the XFLY engineers have used CFD (Computer Fluid Dynamics), which has enabled the Swift 2100 to achieve a high lift-to-drag ratio and excellent aerodynamic characteristics. The factory-installed power system includes an efficient 3136-1000KV brushless motor with 40A brushless ESC and drives a 10x6 2-blade folding propeller with metal spinner. This system can be powered by either a 3S, or a 4S LiPo battery to deliver plenty of thrust for fast climbs to soaring altitudes, aerobatics, and general sport flying.

The XFLY Partenavia P68 is a small, semi-scale twin-engined model that is perfect for flying in small areas such as local parks, sports fields, etc. It has been designed to be extremely easy to fly and assemble, which makes it perfect as an entry-level choice for the novice pilot. The design is based on the full-size Partenavia P68 which is a 6-seater, twin-engined high-wing monoplane that is generally used for light transport and training.

The XFLY Partenavia P68 is a small, semi-scale twin-engined model that is perfect for flying in small areas such as local parks, sports fields, etc. It has been designed to be extremely easy to fly and assemble, which makes it perfect as an entry-level choice for the novice pilot. The design is based on the full-size Partenavia P68 which is a 6-seater, twin-engined high-wing monoplane that is generally used for light transport and training.

The XFLY Eagle Twin is an innovative racing model with twin EDF motors on each wing tip, this is a radical configuration and allows for a large area in the middle of the fuselage for batteries, and other equipment. The included power system gives a power-to-weight ratio of over 1:15 which allows for easy hand-launching and an incredible performance. Top speeds of over 110mph are achievable and a special EDF mixing configuration makes the Eagle capable of performing differential maneuvers including flat spins, inverted flat spins, and other challenging aerobatic maneuvers.

The XFLY Eagle Twin is an innovative racing model with twin EDF motors on each wing tip, this is a radical configuration and allows for a large area in the middle of the fuselage for batteries, and other equipment. The included power system gives a power-to-weight ratio of over 1:15 which allows for easy hand-launching and an incredible performance. Top speeds of over 110mph are achievable and a special EDF mixing configuration makes the Eagle capable of performing differential maneuvers including flat spins, inverted flat spins, and other challenging aerobatic maneuvers.

The XFLY A-10 Thunderbolt II is a small, scale twin-EDF model of the iconic US Air Force close attack fighter that is perfect for flying in smaller areas such as local parks, sports fields, etc. The full-size A-10 Thunderbolt affectionately known as the "Warthog", was mainly used for close air support for ground troops and armored vehicles. It was highly maneuverable due to its large ailerons, was very tough and durable, could take a lot of punishment, and it "pièces de résistance" was the Gatling gun mounted in the nose. The actual airframe was designed around this high-powered 30mm gun, it was one of the most powerful guns ever fitted to a plane and could fire up to an amazing 4,200 rounds per minute.

The Dancing Wings Hobby Fokker Eindecker III is a scale model of the famous World War 1 monoplane fighter. The kit comes almost ready to fly and is constructed in balsa for a strong, lightweight, authentic structure. A lot of scale detail is supplied including, a dummy engine, scale wheels, and a dummy machine gun, plus a full accessory kit is also supplied which includes all the necessary hardware including scale rigging to complete the kit.

The Dancing Wings Hobby S.E.5A is a detailed scale model of the famous World War 1 biplane fighter. The kit comes almost ready to fly and is constructed in balsa for a strong, lightweight, authentic structure. A lot of scale detail is supplied including, scale exhausts, scale wheels, and a dummy machine gun, plus a full accessory kit is also supplied which includes all the necessary hardware including scale rigging to complete the kit.

We have all had to start learning to fly an RC model at some point, and a stable, high-wing trainer that is very forgiving is what is required. The Dancing Wings Hobby Vogee-16 Trainer is the perfect choice for the rookie pilot. It has a large, flat-bottomed wing with dihedral which enables it to fly very slowly, and it has the stability to sort itself out if you get in a muddle. The Vogee's flying characteristics are very benign, beginners tend to over-control, and the Vogee is very gentle in its handling, especially if you install one of the readily available 3-axis gyros that are available on the market these days. It also has a tricycle landing gear with a steerable nosewheel which really helps with the take-offs and landings. This version of the Vogee is supplied with a powerful 2817-900KV brushless motor, a 60A brushless ESC, an 11" prop, 2 x 37g servos, and 2 x 17g 

The Dancing Wings Hobby Stick-14T 3D aerobatic trainer is the perfect choice for intermediate and experienced RC pilots alike. It is based on the classic stick design and is quite capable of all the usual aerobatic maneuvers, plus with the right power train, it doubles up as the perfect 3D trainer. It has a very wide speed range, it is just as happy flying slowly as it is screaming about the sky. For added fun and enjoyment, the strip ailerons are split halfway making for outboard ailerons and inboard flaps. This allows for really slow or steep approach landings, and if the flaps are mixed in with your other controls it allows you to customize the handling to suit your own flying style. 

The Dancing Wings Hobby Cute Girl laser cut balsa kit captures the type of vintage model airplane that was used in the early days of RC with radio assist. It has that classic retro look, lots of wing dihedral, band on wings, a large cabin, classic shapes to the wings and empennage, and tail dragger landing gear, all the features required for a retro classic look.

The controls are just basic 3 channels, rudder, elevator, and motor control, this keeps things nice and simple. We recommend that you power the Cute Girl with a brushless motor set-up. However, a nitro or a diesel engine can be used for that even more authentic vintage look and classic soundtrack.

The Dancing Wings Hobby Aion laser cut balsa kit is an easy-build electric sports glider that includes ailerons and flaps. The Aion is aimed at the modeler who wants to experience real model-making but wants something that is reasonably straightforward to build. This is achieved with the use of accurate laser-cut parts and the simple box-type fuselage which produce a strong, accurate, lightweight structure. The Aion is relatively easy to build, however, we do recommend that some experience in building a wood model airplane has been gained previously. Most of the components are constructed over the detailed, high-quality printed 1:1 building plan. This outstanding kit is supplied with a powerful 2216-920KV brushless motor, a 30A brushless ESC, an 11" folding prop with metal spinner, 6 x 9g servos, and an iron-on covering film pack

The Dancing Wings Hobby Savage Bobber is a small, lightweight foam model that is quick and simple to build. The full-size Savage Bobber was devised by the Zlin Aviation Company. The Bobber as in the motorcycle world means that it is a stripped-down, customized version of an original. The Savage Bobber is a stripped-down, customized version of its older brother the Savage Classic. It is lighter, more maneuverable, and has a slightly narrower fuselage, and the absence of covering to the rear of the fuselage greatly improves the crosswind handling.

The model is reasonably straightforward to assemble, it is manufactured in pre-painted high-quality EPP foam sheet for the majority of the construction, tough plastic for the open framework rear fuselage, and lightweight balsa for the internal structure. Carbon strips are also included to reinforce and improve the stiffness of the structure. It builds up quickly into a good-looking, fun-to-fly lightweight (only 98g) sports plane that is perfect for indoor or park flying. This ARF kit is supplied with a powerful 1108-4000KV brushless motor, 5A brushless ESC, 5" propeller, and 4 x 2g servos.

The Dancing Wings Hobby Shining is a large lightweight profile-style foam kit that is quick and simple to build. It has been designed to be the perfect introduction to 3D flying and will perform extreme 3D maneuvers such as waterfalls, harriers, knife-edge loops, rolling circles, and much more.

The model is very straightforward to assemble, it is manufactured in pre-painted high-quality EPP foam sheet for the majority of the construction so the parts count is quite low, and carbon strips are supplied for strengthening. It builds up quickly into a good-looking, fun-to-fly lightweight extreme sport 3D plane that is perfect for park flying and on playing fields. This ARF model is supplied with a powerful 2216-950KV brushless motor, 30A brushless ESC, 10" propeller, and 4 x 9g servos.

Este pequeño kit de toma alrededor de 4 horas para construir y satisfará el jocky del acelerador en todos nosotros!

El Flycat 56mm viene con EDF y se necesita un ESC 25A y 4800kv Inrunner.

Este plano es extremadamente rápido, (más de 100 mph!), Sin embargo sigue siendo estable en vuelo lento.

Especulación.
Envergadura: 640mm
Longitud: 800 mm
Peso: 290 g
BESC: 25A (no incluido)
Motor: 20-30 4800kv tamaño Inrunner (no incluido)
Lipo: 1300mAh 11.1v 20C (no incluido)

Necesario.
Motor & ESC
3 x Servo 9g
5 o 10 minutos epoxi (Araldite)
1 x Servo Y plomo
plomo 1 x Servo Extensión
12 AWG alambre de silicio (20cm por el motor para ESC)
la batería lipo 1300mah 11.1v 20C
Su propio receptor y el transmisor

Nuestro informe de vuelo.

Kit encaja bien, ligero lijado de bordes anterior y posterior requeridos para eliminar la espuma adicional. Elegimos para no reforzar el ala con tubos CF, que didnt llegar a ser un problema, incluso a plena velocidad alta G gira.

Nos decidimos a montar el BESC siendo el área de la batería, en caso de que la batería necesaria para mover hacia adelante para ajustar CofG, sin embargo, esto no era necesario.

EDF se montó en el palo monte. montaje palo se acorta, con la pieza extra que se usa para elevar el FED de la palanca para desactivar el FED mortaja. 2 pernos a cabo la unidad de ventilación al palo, una antes y otra después de las aspas del ventilador.

Primer vuelo.

Hemos mantenido CofG 9,5 cm desde el ápice de las alas de borde de ataque. El Flycat se puso en marcha mano a 3/4 de gas, acelere rápidamente. Para nuestra sorpresa, no era necesario recorte.

El Flycat es un kit muy rápido para volar, y requiere una gran cantidad de ascensor en los giros. Se aconseja poner el ascensor en lanza máximo. Se necesita una inmensa cantidad de ascensor durante los giros!

En general un excelente plano que vuela sin problemas, incluso en días de viento.

Sugerimos un buen paquete de lipo, como este hotty masticar a través de un 1500mAh en sólo 5 minutos. Se utilizó el paquete de 3S1P ZIPPY-R 1800mAh 22C por alrededor de 8 vuelos minuto. En comparación con el paquete ZIPPY-Q que nos trajo corta en unos 7 minutos.

P-51D Shangri - Sustitución estabilizador horizontal

Durafly® ™ Serie Micro - Reemplazo de montaje del motor

Súper Kinetic - Reemplazo de montaje del motor

Súper Kinetic - Sustitución del pabellón

Súper Kinetic - Control de la sustitución de cables - Acero (con el balón de Enlace)

Súper Kinetic - etiquetas de reemplazo (2pcs / set)

Durafly ™ SkyMule 1500mm - Parte inferior Servo Hatch