Aviones

Esta versión H-King del clásico warbird F4U Corsair está fabricada en una espuma EPO con un acabado excelente en un auténtico esquema de color azul marino con las calcomanías preaplicadas. El Corsair es un volador muy estable por derecho propio, para la mayoría de los pilotos, el giroscopio no es necesario. Sin embargo, para los pilotos principiantes y de poca duración, se suministra un sistema de estabilización de vuelo ORX de 6 ejes que facilita aún más el vuelo. El sistema de estabilización utiliza una MCU de 32 bits y un giroscopio digital de 6 ejes para una respuesta de control ultrarrápida, se puede cambiar del modo principiante al modo experto a medida que crece su experiencia.

H-King Avro Lancaster V3 "Dumbo" Replacement Fuselage w/Decals & Tailwheel.

Note: These replacement parts are predominantly for the Lancaster V3 due to the color scheme, however, they will also fit versions 1 and 2.

H-King Avro Lancaster V3 "Dumbo" Replacement Main Wings w/Decals.

Please note: No motors, ESC's or servos are included, these are the foam parts only.

H-King Avro Lancaster V3 "Dumbo" Replacement Horizontal Stabilizer w/Elevators.

Note: These replacement parts are predominantly for the Lancaster V3 due to the color scheme, however, they will also fit versions 1 and 2.

H-King Avro Lancaster V3 "Dumbo" Replacement Vertical Stabilizers.

Note: These replacement parts are predominantly for the Lancaster V3 due to the color scheme, however, they will also fit versions 1 and 2.

H-King Avro Lancaster V3 "Dumbo" Replacement Nose Dome (Bomb Aimers Dome) and Gun Turret Set.

Note: These replacement parts are predominantly for the Lancaster V3 due to the color scheme, however, they will also fit versions 1 and 2.

Estos retractores eléctricos sin servo opcionales han sido diseñados para el H-King Avro Lancaster e incluyen ruedas con aspecto de escala. Son compatibles con las versiones 1, 2 y 3.

The subject of this kit is the German liaison aircraft built during WW11, the Fieseler Fi 156 Storch. The Storch (German for "Stork") is famous for its STOL (Short Take-Off and Landing) abilities and it had an incredibly low stall speed of only 31mph. It was mainly used during WW11 for reconnaissance, spotting for the army and forward operations, and medical evacuation. Its design incorporated hinged slats along the entire length of the wings leading edge and a hinged and slotted set of control surfaces ran along each trailing edge, this was split equally to form outboard ailerons and inboard flaps. Virtually nothing about the Storch is streamlined with bits sticking out everywhere including the side windows,  this with its long undercarriage hanging down gives it a unique long-legged bird look which is why it was given the name of "Storch".

A replacement pre-painted fuselage for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

A replacement upper and lower pre-painted main wing set with ailerons, horns, and cabane strut fixings for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

A replacement pre-painted horizontal stabilizer with elevator, carbon joining spar, and bracing wire fixings for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

A replacement pre-painted battery hatch with canopy for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

A replacement scale spinner with backplate for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

A replacement pre-painted motor cowl with a detailed dummy engine for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

A replacement set of inter-plane, and cabane struts for the Durafly Gloster Gladiator Mk1 Biplane Fighter (6 pieces).

A replacement main landing gear set with fairings for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

A replacement pair of scale main landing wheels with hubs and fixing screws for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

A replacement tail wheel assembly with wheel for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

A replacement 3719-770KV brushless motor with prop adapter and X-Mount for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

A replacement prop adapter for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

A replacement accessory pack that includes pushrods, pushrod keepers, and screws for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

A replacement scale detailing pack that includes dummy exhausts, machine guns, and air intake for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

A replacement decal set for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

A replacement rigging set that includes stranded flying wire and crimps for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

A set of 4 replacement propeller blades for the H-King 800mm Hawker Tempest.

A replacement 3 blade propeller assembly with hub and screws for the H-King 750mm Chance Vought F4U Corsair.

A replacement spinner assembly with insert for the H-King 750mm Chance Vought F4U Corsair.

El H-King P-51 "Galloping Ghost" es el primero de una nueva miniserie de H-King, los "Reno Aces", luchadores de la Segunda Guerra Mundial vestidos para impresionar en las carreras aéreas. El P-51 "Galloping Ghost" con el motor sin escobillas de serie 3108-1070KV incluido ofrece un modelo realmente rápido recién salido de la caja con velocidades que se acercan a las 100mph cuando se usa el LiPo 4S de 2200mah recomendado. Sin embargo, si usted es un experto y está buscando velocidades de más de 100mph, entonces existe el motor sin escobillas 3108-1170KV "Pro" de ajuste directo opcional. Esto le dará a su Reno Ace de gran apariencia un rendimiento realmente balístico en la misma hélice, ESC y batería 4S para aquellos que pueden manejar el par de rotación adicional en el lanzamiento.

Un juego de alas de reemplazo para el H-King Reno Aces P-51 "Galloping Ghost". Incluye las cubiertas de los servos de los alerones, las varillas de empuje y las calcomanías aplicadas de fábrica

A replacement fuselage set for the H-King Reno Aces P-51 "Galloping Ghost", includes factory-applied decals. Please note that the top decking, canopy, and cowl are not supplied with this fuselage set.

A replacement horizontal stabilizer with elevator for the H-King Reno Aces P-51 "Galloping Ghost".

A replacement cowl with factory-applied decals and mounting screws for the H-King Reno Aces P-51 "Galloping Ghost".

A replacement spinner with backplate for the H-King Reno Aces P-51 "Galloping Ghost".

Una tapa de escotilla de repuesto con un dosel dorado para el H-King Reno Aces P-51 "Galloping Ghost".

A replacement wing set with servo covers, and pushrods for the H-King Reno Aces Grumman F6F Hellcat "Little Nugget".