Aviones

The Ranger 2000 is easy to assemble and features a large wingspan which provides stability, and also allows the model to fly at slow speeds. The EPO wings are fitted with two spars for strength and each aileron is reinforced with carbon to eliminate any chance of distortion or twisting. The wings are attached to the fuselage using fast connect clips, after flying, simply squeeze the clips to release the wings.

The Ranger 2400 is a large electric powered pusher glider that has been specifically designed for FPV flying.  The enormous fuselage has plenty of room for large capacity or twin battery packs, radio and stabilizer components, FPV equipment, and molded into the front just below the nose is a purpose-made provision for an FPV camera. Also included is the usual Volantex camera mount that can take the place of the black canopy if you wish. Assembly is quick and easy with no glue required, the vertical fin and horizontal stabilizer are simply screwed to the rear of the fuselage. The EPO wings are fitted with a carbon spar for strength and 2 robust metal spars join the wings to the fuselage. Also, each of the large ailerons is reinforced with carbon to eliminate any chance of distortion or twisting. The wings are attached to the fuselage using the popular Volantex fast connect clips, after flying, simply squeeze the clips to release the wings.

The Phoenix V2 2000 is a quick and easy to assemble electric powered glider with flaps and large ailerons for a precise, aerobatic performance. The EPO wings are fitted with a carbon spar for strength and 2 metal spars join the wings to the fuselage. Also, each aileron is reinforced with carbon to eliminate any chance of distortion or twisting. The wings are attached to the fuselage using fast connect clips, after flying, simply squeeze the clips to release the wings.

The Phoenix 2400 is an extended wing version of the popular Phoenix 1600mm and 2000mm range of electric powered gliders. Assembly is quick and easy with no glue required, the vertical fin and horizontal stabilizer are simply screwed to the rear of the fuselage. The EPO wings are fitted with a carbon spar for strength and 2 metal spars join the wings to the fuselage. Also, each aileron is reinforced with carbon to eliminate any chance of distortion or twisting. The wings are attached to the fuselage using fast connect clips, after flying, simply squeeze the clips to release the wings.

Volantex Ranger 1600 and Phoenix 1600 Replacement Fin/Rudder/Horizontal Stabilizer.

Volantex ASW 28 Replacement V3 4018-1050KV Brushless Motor.

A replacement canopy for the Volantex Ranger 1600, Ranger 2000, and Phoenix V2 electric aircraft.

Volantex Ranger 1600 Replacement Control Horns (6 sets).

Volantex Phoenix 2400 Replacement Fuselage w/Canopy & Wheel.

Volantex Ranger 1600/2000/Phoenix V2 Replacement Camera Mount Canopy.

Volantex Ranger 2000 Replacement Propeller Adapter.

Volantex Saber 920 Replacement 2212-1250KV Brushless Motor.

Volantex Ranger 1600 Replacement Push Rod Set.

Volantex Ranger G2 Replacement 2212-1400KV Brushless Motor.

Volantex Replacement Main Wing Quick Release Connector Set, these suit the following Volatex aircraft.

• Ranger 1600/2000/2400
• Phoenix V2 1600/2400
• ASW 28

Volantex Ranger 1600/2000/2400 Replacement Motor Mounting Pod.

Volantex Ranger 1600 and Phoenix 1600 Replacement 2212-1400KV Brushless Motor.

A replacement horizontal stabilizer with elevator, and vertical stabilizer with rudder for the Volantex ASW 28, suitable for versions V2 and V3. 

Volantex ASW 28 V2/V3 Replacement Canopy.

A replacement wing set for the Volantex Ranger 2000, and Phoenix V2 electric aircraft.

Volantex ASW 28 V2/V3 Replacement Canopy Base.

Volantex ASW 28 V2/V3 Replacement Push Rod Set.

Volantex ASW 28 V2/V3 & Phoenix V2/2400 Replacement Folding Propeller Assembly.

A replacement fin, rudder, and horizontal stabilizer for the Volantex Ranger 2000, and Phoenix V2 electric aircraft.

Volantex Ranger 2000/2400/Phoenix V2 Replacement Push Rod Set.

Volantex Phoenix S Replacement Black Canopy.

Volantex Trainstar Ascent Replacement Control Horns w/Screws (4 sets).

Volantex Ranger 2000 Replacement 2216-1400KV Brushless Motor.

A replacement wing set for the Volantex Ranger 2400, and Phoenix 2400 electric aircraft.

A replacement horizontal stabilizer with elevator, and vertical stabilizer with rudder for the Volantex Ranger 2400 and Phoenix 2400.

Volantex Phoenix 2400/Ranger 2400 Replacement Canopy.

Volantex Phoenix 2400/Ranger 2400 Replacement Camera Mount Canopy.

A replacement wing set for the Volantex ASW 28, suitable for versions V2 and V3. Includes the winglets and the 2 wing joiners.

The subject of this kit is the German liaison aircraft built during WW11, the Fieseler Fi 156 Storch. The Storch (German for "Stork") is famous for its STOL (Short Take-Off and Landing) abilities and it had an incredibly low stall speed of only 31mph. It was mainly used during WW11 for reconnaissance, spotting for the army and forward operations, and medical evacuation. Its design incorporated hinged slats along the entire length of the wings leading edge and a hinged and slotted set of control surfaces ran along each trailing edge, this was split equally to form outboard ailerons and inboard flaps. Virtually nothing about the Storch is streamlined with bits sticking out everywhere including the side windows,  this with its long undercarriage hanging down gives it a unique long-legged bird look which is why it was given the name of "Storch".

A replacement AVIOS Extra 330LX V2 left-wing with factory-applied decals.

Note: This replacement will also fit the AVIOS Extra 3300LX V1, but the color scheme will of course be different.