Aviones

The Dancing Wings Hobby Fokker Eindecker III is a scale model of the famous World War 1 monoplane fighter. The kit comes almost ready to fly and is constructed in balsa for a strong, lightweight, authentic structure. A lot of scale detail is supplied including, a dummy engine, scale wheels, and a dummy machine gun, plus a full accessory kit is also supplied which includes all the necessary hardware including scale rigging to complete the kit.

The Dancing Wings Hobby Shining is a large lightweight profile-style foam kit that is quick and simple to build. It has been designed to be the perfect introduction to 3D flying and will perform extreme 3D maneuvers such as waterfalls, harriers, knife-edge loops, rolling circles, and much more.

The model is very straightforward to assemble, it is manufactured in pre-painted high-quality EPP foam sheet for the majority of the construction so the parts count is quite low, and carbon strips are supplied for strengthening. It builds up quickly into a good-looking, fun-to-fly lightweight extreme sport 3D plane that is perfect for park flying and on playing fields. This ARF model is supplied with a powerful 2216-950KV brushless motor, 30A brushless ESC, 10" propeller, and 4 x 9g servos.

Presentación de nuestra MX2 3D PPE. Con un diseño y el diseño fantástico, todo esto a cabo PPE 3D'er respondiendo a los pilotos 3D más ansiosos!

Es fuselaje es muy rígido a la torsión con todo luz con un montón de espacio debajo de la escotilla superior largo de su radio y el sistema de alimentación. El ala es un asunto de una sola pieza con la construcción del PPE, un perfil simétrico muy preciso con 2 largueros adicionales para reducir al mínimo la flexión y giro. Las superficies de control son algo más - el elevador, timón y alerones cuentan con una construcción de 3 capas (EPP-Depron-PPE) haciendo para superficies rígidas y hay flexión en el extremo lanza! Ajustar rollos 'Snap' y la respuesta de control es instantánea.

La luz - sin embargo rígida - fuselaje se suma a una gran volar 'espumosa' 3D. Cascadas, aguiluchos, giros planos, círculos de rodadura este modelo tiene la precisión para llevar a cabo estos y otros movimientos que se pueda imaginar!

Montaje de la estructura del avión en un proceso rápido 10 a 15 minutos con la ayuda de un poco de medio CA. Los diseños de radio y sistemas de potencia son muy sencillas, la escotilla superior largo de decisiones para facilitar el acceso.

Este es un gran modelo para el vuelo en el parque general y 3D incondicional. Usted será muy difícil de romper este modelo, que se llevará a golpes duros y sólo mantener rebotando cada vez!


caracteristicas:
• material del EPP resistente, ligero y resistente al choque
• superficies rígidas de control compuesta PPE / Depron
• Diseño revolucionario se suma a la integridad estructural y la rigidez de la estructura del avión
• De peso ligero proporciona una óptima carga alar
• El rendimiento acrobático excepcional y maniobrabilidad 3D.
• El diseño simple permite un fácil acceso a los equipos y la instalación
• El esquema de color se destacan grandes para la orientación


Especificaciones:
Envergadura: 955mm
Longitud: 945 mm
Área de ala: 15.2dm2
Peso: 550g (sin batería)




Se requiere:
sistema de radio 4 canales
2217 950-1100KV sin escobillas outrunner
30amp ESC
3S 11.1V 1100-1300MAH Li-Po
10x4.7 / hélice 11x4.7
4 x servos 9g

The Ranger 2000 is easy to assemble and features a large wingspan which provides stability, and also allows the model to fly at slow speeds. The EPO wings are fitted with two spars for strength and each aileron is reinforced with carbon to eliminate any chance of distortion or twisting. The wings are attached to the fuselage using fast connect clips, after flying, simply squeeze the clips to release the wings.

The Phoenix V2 2000 is a quick and easy to assemble electric powered glider with flaps and large ailerons for a precise, aerobatic performance. The EPO wings are fitted with a carbon spar for strength and 2 metal spars join the wings to the fuselage. Also, each aileron is reinforced with carbon to eliminate any chance of distortion or twisting. The wings are attached to the fuselage using fast connect clips, after flying, simply squeeze the clips to release the wings.

The Phoenix 2400 is an extended wing version of the popular Phoenix 1600mm and 2000mm range of electric powered gliders. Assembly is quick and easy with no glue required, the vertical fin and horizontal stabilizer are simply screwed to the rear of the fuselage. The EPO wings are fitted with a carbon spar for strength and 2 metal spars join the wings to the fuselage. Also, each aileron is reinforced with carbon to eliminate any chance of distortion or twisting. The wings are attached to the fuselage using fast connect clips, after flying, simply squeeze the clips to release the wings.

El H-King Crusader 30E se basa en el diseño clásico del bastón. Este avión de radiocontrol eléctrico puede ser pilotado tanto por principiantes como por expertos. Está construido con una capa liviana y balsa pintada con un esquema de color de alto contraste. El Crusader se destacará en el suelo y en el aire en su club de hobby local.

El Wargo Signature Edge 540T 3D es otro increíble avión de la serie inspirado en el reconocido piloto 3D Michael Wargo. El Edge 540T fue diseñado específicamente para entrenamiento acrobático y de vuelo 3D muy preciso. Michael Wargo, nuestro piloto de equipo y experto en 3D, quería un avión de espuma que fuera más rígido y más ligero que otros foamies. Esto se logró mediante la combinación de un marco de balsa rígido y liviano cubierto con espuma de EPP liviana y resistente a los golpes.

We have all had to start learning to fly an RC model at some point, and a stable, high-wing trainer that is very forgiving is what is required. The Dancing Wings Hobby Vogee-16 Trainer is the perfect choice for the rookie pilot. It has a large, flat-bottomed wing with dihedral which enables it to fly very slowly, and it has the stability to sort itself out if you get in a muddle. The Vogee's flying characteristics are very benign, beginners tend to over-control, and the Vogee is very gentle in its handling, especially if you install one of the readily available 3-axis gyros that are available on the market these days. It also has a tricycle landing gear with a steerable nosewheel which really helps with the take-offs and landings. This version of the Vogee is supplied with a powerful 2817-900KV brushless motor, a 60A brushless ESC, an 11" prop, 2 x 37g servos, and 2 x 17g 

The Dancing Wings Hobby Stick-14T 3D aerobatic trainer is the perfect choice for intermediate and experienced RC pilots alike. It is based on the classic stick design and is quite capable of all the usual aerobatic maneuvers, plus with the right power train, it doubles up as the perfect 3D trainer. It has a very wide speed range, it is just as happy flying slowly as it is screaming about the sky. For added fun and enjoyment, the strip ailerons are split halfway making for outboard ailerons and inboard flaps. This allows for really slow or steep approach landings, and if the flaps are mixed in with your other controls it allows you to customize the handling to suit your own flying style. 

The Dancing Wings Hobby Aion laser cut balsa kit is an easy-build electric sports glider that includes ailerons and flaps. The Aion is aimed at the modeler who wants to experience real model-making but wants something that is reasonably straightforward to build. This is achieved with the use of accurate laser-cut parts and the simple box-type fuselage which produce a strong, accurate, lightweight structure. The Aion is relatively easy to build, however, we do recommend that some experience in building a wood model airplane has been gained previously. Most of the components are constructed over the detailed, high-quality printed 1:1 building plan. This outstanding kit is supplied with a powerful 2216-920KV brushless motor, a 30A brushless ESC, an 11" folding prop with metal spinner, 6 x 9g servos, and an iron-on covering film pack

The Dancing Wings Hobby S.E.5A is a detailed scale model of the famous World War 1 biplane fighter. The kit comes almost ready to fly and is constructed in balsa for a strong, lightweight, authentic structure. A lot of scale detail is supplied including, scale exhausts, scale wheels, and a dummy machine gun, plus a full accessory kit is also supplied which includes all the necessary hardware including scale rigging to complete the kit.

The Bixler 1.1 is a proven platform for beginners right through to intermediate pilots. Well known for stability, the Bixler is also an excellent choice for an inexpensive FPV platform and perfect for those lazy Sunday afternoons.

This version of the Bixler 1.1 is not supplied with a motor, ESC, servos, or RC equipment, it allows you to choose yourself the components you wish to use. Whatever you are looking for, the Bixler 1.1 has it covered.

Improving on the popular Bixler 2, this latest kit is the perfect trainer plane or inexpensive FPV platform. Attach your flight camera into the nose or canopy of the plane to enjoy First Person View while flying. The Bixler 3 kit requires a motor, ESCs, a radio system and battery. 

This great-looking EDF sports jet is the one you have all been waiting for, and it has one of the lowest all-up weights in its class, it is a good 500g lighter than comparable models that are available on the market today. It is a sport scale design and is based on the iconic BAE Hawk trainer as used by military air forces all over the world. This easy-to-assemble model has been termed as an almost ready-to-fly-plus, it is completely built out of the box, the wings, all-flying horizontal stabilizers, and vertical stabilizer just bolt-on, and pre-installed are a set of all-metal electronic retracts with doors, sequencer control box, and lightweight wheels, 11 high-torque, metal-geared digital servos, and a set of pre-installed, day-bright LED lights. The Sports Hawk comes pre-painted in a Formula One-inspired paint scheme and includes a set of HobbyKing brand decals that you can apply if you wish. The pre-painted Sport Hawk color scheme lends itself nicely to having other sponsorship decals being applied, or you could even repaint it in a custom color scheme, the choice is yours. A nice touch is the removable base to the cockpit area which makes it very easy to add a pilot and more cockpit detail if you wish.

Looking for the perfect trainer? Or an in-expensive FPV platform? Maybe you are a club pilot looking for something you can just pull out of the car and fly on one of those lazy Sunday afternoons? The Hobbyking® ™ Bixler® ™ 2 ticks all of these boxes and more! The Bixler® ™ 2 has had some improvements to make it even better such as a bigger air inlet for better motor cooling.