Aeronave

The Legend Reimagined: Bush Plane DNA Meets 3D Performance.The legend of the Tundra has been reimagined for a new generation of pilots. We have taken the bush-flying DNA of the world-famous Tundra series and fused it with the aggressive, lightweight performance of a 3D profile foamy.

Meet the Durafly Tundra TPX—a standout in Hobbyking’s RC plane lineup, built to turn your local flying site or indoor venue into a high-octane 3D flight playground. Whether you're a STOL enthusiast or a hardcore 3D pilot, the Durafly Tundra TPX delivers a flight envelope that is as wide as it is exciting.

After the incredible success of the Tundra V1 and V2, Durafly has decided to produce yet another version with even more improvements to bring the Tundra series bang up to date. The V3 is now a pure 4S set-up so it has power in abundance to make your flying even more fun than it was before (if that is at all possible!). Other changes and improvements include daylight bright LEDs (so bright they are suitable for true dawn-to-dusk flying), a reinforced nylon prop that is more efficient, and better balanced, a return to the classic EPO foam wheels which are lighter, and stronger, pre-installed pushrods, and hex-head bolts and screws throughout. The V3 is available in the classic Tundra green and white scheme, or a red and silver color scheme Durafly has called the "Inspire". The reason is that the original Tundra was "Inspired" by the "Highlander" full-size SuperStol experimental airplane.

Tras el éxito de la EFX Racer, se decidió producir una versión mini, como se suele decir, todo lo bueno también viene en frasco pequeño, así nació la MFX Racer. El MFX ha sido diseñado con los mismos estándares que sus hermanos mayores y sigue ofreciendo velocidad, fuerza, agilidad y la estabilidad que esperas de un modelo Durafly. Además, obtienes la simplicidad de montaje y la calidad que sólo un modelo EPO de Durafly puede ofrecer.

Con un número mínimo de piezas y tiempo de montaje, el MFX Racer simplemente se sujeta y atornilla en menos tiempo del que se tarda en cargar una batería. El MFX Racer en su configuración de 4S es rápido, pero aún así se siente excepcionalmente estable y da al piloto esa sensación de bloqueo. Sin embargo, a diferencia de la mayoría de las máquinas de velocidad, también tiene un manejo excepcionalmente bueno a baja velocidad. Con su control de 4 canales, el MFX Racer es también muy acrobático, con grandes bucles, rollos rápidos, filo de cuchillo, snaps, y giros, el MFX Racer puede hacer todo y más, ¡su único límite eres tú, el piloto! El MFX tiene 2 opciones de punta de ala (ambas se suministran en la caja), una opción estándar de 815mm, o la opción de ala recortada de 715mm. La configuración de ala estándar da una tasa de ascenso mucho mejor, mientras que la configuración de ala recortada aumenta dramáticamente la tasa de alabeo.

Este pequeño kit de toma alrededor de 4 horas para construir y satisfará el jocky del acelerador en todos nosotros!

El Flycat 56mm viene con EDF y se necesita un ESC 25A y 4800kv Inrunner.

Este plano es extremadamente rápido, (más de 100 mph!), Sin embargo sigue siendo estable en vuelo lento.

Especulación.
Envergadura: 640mm
Longitud: 800 mm
Peso: 290 g
BESC: 25A (no incluido)
Motor: 20-30 4800kv tamaño Inrunner (no incluido)
Lipo: 1300mAh 11.1v 20C (no incluido)

Necesario.
Motor & ESC
3 x Servo 9g
5 o 10 minutos epoxi (Araldite)
1 x Servo Y plomo
plomo 1 x Servo Extensión
12 AWG alambre de silicio (20cm por el motor para ESC)
la batería lipo 1300mah 11.1v 20C
Su propio receptor y el transmisor

Nuestro informe de vuelo.

Kit encaja bien, ligero lijado de bordes anterior y posterior requeridos para eliminar la espuma adicional. Elegimos para no reforzar el ala con tubos CF, que didnt llegar a ser un problema, incluso a plena velocidad alta G gira.

Nos decidimos a montar el BESC siendo el área de la batería, en caso de que la batería necesaria para mover hacia adelante para ajustar CofG, sin embargo, esto no era necesario.

EDF se montó en el palo monte. montaje palo se acorta, con la pieza extra que se usa para elevar el FED de la palanca para desactivar el FED mortaja. 2 pernos a cabo la unidad de ventilación al palo, una antes y otra después de las aspas del ventilador.

Primer vuelo.

Hemos mantenido CofG 9,5 cm desde el ápice de las alas de borde de ataque. El Flycat se puso en marcha mano a 3/4 de gas, acelere rápidamente. Para nuestra sorpresa, no era necesario recorte.

El Flycat es un kit muy rápido para volar, y requiere una gran cantidad de ascensor en los giros. Se aconseja poner el ascensor en lanza máximo. Se necesita una inmensa cantidad de ascensor durante los giros!

En general un excelente plano que vuela sin problemas, incluso en días de viento.

Sugerimos un buen paquete de lipo, como este hotty masticar a través de un 1500mAh en sólo 5 minutos. Se utilizó el paquete de 3S1P ZIPPY-R 1800mAh 22C por alrededor de 8 vuelos minuto. En comparación con el paquete ZIPPY-Q que nos trajo corta en unos 7 minutos.

Súper Kinetic - Reemplazo de montaje del motor

Súper Kinetic - Sustitución del pabellón

Súper Kinetic - Control de la sustitución de cables - Acero (con el balón de Enlace)

Do you feel the need for speed? Then this great-looking, extremely fast Rare Bear Reno Racer from Durafly is for you. It is supplied as a Plug-N-Fly model with minimal parts count, so assembly is quick and simple. There is no gluing required, just one screw holds the tail components in place, and 1 screw for the wing. Battery and radio access is via the large magnetically held canopy hatch, so radio installation and battery changes are very easy and straightforward.

The Avios Extra NG (Next Generation) from Hobbyking is a premium semi-scale Aerobatic RC Plane modeled after the latest Extra series aircraft. The full size offers improved aerodynamics, an even higher degree of manoeuvrability, and precise handling. The Avios version of this incredible airplane inherits all these features to make it a great-looking, highly aerobatic, 3D-capable machine.

This high-performance aerobatic airplane features a potent 6S power system and includes a SK3 5055-500KV motor, Aerostar 80A RVS G2 ESC, and a 16x6 propeller. This setup gives you an incredible high power-to-weight ratio. High-torque, high-voltage, metal-geared 30g Turnigy 30/7-DHV digital servos are used throughout. These have excellent resolution and centering so that your exact transmitter inputs are conveyed directly to the control surfaces for precise control in all types of extreme manoeuvres. Also included are a pair of bolt-on "Side Force Generators" for increased side area, which makes for enhanced and stable knife-edge flying - a hallmark of the Extra NG design.

After the success of the original H-King FLYCAT 70mm EDF jet, which was a basic aileron, elevator, and throttle-only model, we now have the FLYCAT V2. This new version has an upgraded power setup with a brushless inrunner motor and Aerostar RVS G2 ESC, twin rudders, a set of pre-installed electronic retracts, and a brand-new high-viz color scheme. It retains from the V1 its stunning streamlined looks, agility, performance, and impeccable flying characteristics.

With a new more powerful setup, the 2860-2100KV brushless inrunner motor and the 12-blade EDF unit make the Flycat V2 not only quite a bit faster, but it improves the verticals and it also sounds amazing, just like a real turbine, especially when doing fast, high-speed passes. Coupled with the motor and EDF unit is one of our Aerostar 80A RVS G2 speed controllers, this not only gives you solid reliability, it also offers you the choice of instant reverse. If you are flying from a hard runway this helps shorten the landing run quite considerably when selected after touchdown. Another feature of the FLYCAT V2 is the twin-rudders, these bring in another dimension when flying the V2. It is now able to perform even more jet-like maneuvers including falling leaves and knife-edge, etc, and they also help in the approach to landing and when flying at slower speeds. The new high-viz color scheme not only looks great, but it stands out well in the sky which helps orientation when flying big, fast aerobatic maneuvers. Last but not least on the V2 there is no need for hand-launching, it comes with a set of pre-installed grass-capable electronic retracts. These robust and reliable retracts enable smooth take-offs and landings on hard and grass runways

The Phoenix V2 2000 is a quick and easy to assemble electric powered glider with flaps and large ailerons for a precise, aerobatic performance. The EPO wings are fitted with a carbon spar for strength and 2 metal spars join the wings to the fuselage. Also, each aileron is reinforced with carbon to eliminate any chance of distortion or twisting. The wings are attached to the fuselage using fast connect clips, after flying, simply squeeze the clips to release the wings.

Do you feel the need for speed? Then this great-looking, extremely fast Rare Bear Reno Racer from Durafly is for you. It is supplied as a Plug-N-Fly model with minimal parts count, so assembly is quick and simple. There is no gluing required, just one screw holds the tail components in place, and 1 screw for the wing. Battery and radio access is via the large magnetically held canopy hatch, so radio installation and battery changes are very easy and straightforward.

A replacement AVIOS Extra 330LX V2 left-wing with factory-applied decals.

Note: This replacement will also fit the AVIOS Extra 3300LX V1, but the color scheme will of course be different.

A replacement AVIOS Extra 330LX V2 right-wing with factory-applied decals.

Note: This replacement will also fit the AVIOS Extra 3300LX V1, but the color scheme will of course be different.

A replacement AVIOS Extra 330LX V2 horizontal stabilizer with hinged elevator and factory-applied decals.

Note: This replacement will also fit the AVIOS Extra 3300LX V1, but the color scheme will of course be different.

A replacement AVIOS Extra 330LX V2 vertical stabilizer with hinged rudder and factory-applied decals.

Note: This replacement will also fit the AVIOS Extra 3300LX V1, but the color scheme will of course be different.

A replacement set of AVIOS Extra 330LX V2 wing side-force generators. 

Note: This replacement set will also fit the AVIOS Extra 3300LX V1, but the color scheme will of course be different.

A replacement AVIOS Extra 330LX V2 carbon wing spar.

Note: This replacement will also fit the AVIOS Extra 3300LX V1.

A replacement fuselage for the H-King MX2 Extreme 30E.

A replacement wing set for the H-King MX2 Extreme 30E.

The Durafly Carbon Arcus is a sleek and beautiful F3A biplane designed to perform smooth, F3A-style pattern aerobatics and is the perfect choice for honing your aerobatic skills. It features a durable, lightweight EPO airframe with carbon reinforcement, aluminum landing gear, carbon interplane struts, and an advanced 4S motor and prop combination that offers a high power-to-weight ratio for unending verticals and incredible performance.

Flying the Arcus F3A is a dream, the long tail moment, the low wing loading, and the abundance of power give you a stable and predictable airplane. Take-offs require very little rudder input, rolls are crisp and axial, and loops can be as large as you wish. The large propeller provides ample braking action in the downlines to avoid overspeeding, and if you enjoy flying knife-edge, then the Arcus II performs this with ease. No roll or pitch coupling here, just apply a touch of rudder, control the throttle to hold your line, and the Arcus will knife edge until the cows come home. Finally, when the time comes, throttle back, and the Carbon Arcus settles into a nice sink rate for a perfect 3-point landing every time.

A replacement motor cowl for the H-King MX2 Extreme 30E.

A replacement battery hatch with canopy and pilot for the H-King MX2 Extreme 30E.

A replacement horizontal stabilizer with elevator for the H-King MX2 Extreme 30E.

The Legend Reimagined: Bush Plane DNA Meets 3D Performance.The legend of the Tundra has been reimagined for a new generation of pilots. We have taken the bush-flying DNA of the world-famous Tundra series and fused it with the aggressive, lightweight performance of a 3D profile foamy.

Meet the Durafly Tundra TPX—a standout in Hobbyking’s RC plane lineup, built to turn your local flying site or indoor venue into a high-octane 3D flight playground. Whether you're a STOL enthusiast or a hardcore 3D pilot, the Durafly Tundra TPX delivers a flight envelope that is as wide as it is exciting.

The Yak-11 was designed as an advanced trainer for use by the Soviet Air Force and came into service in 1947. The pilot and instructor sat in tandem under a long canopy that had separate sliding hoods. Although designed as a trainer, Yak-11s were also used in combat during the Korean War, and more recently, highly modified ones have been used very successfully for air racing. The Steadfast was built from scratch as an out-and-out high-performance single-seat racer in Romania in the early 2000s. It was based on the Yak-3, but essentially it looks the same as a Yak-11, so our model is based on our previous Yak-11 model.

The H-King Yak Steadfast is supplied with a power train that has been developed for pure speed. Using a 6S LiPo pack, the 5020-550KV brushless motor with the supplied 85A ESC and 16x6 prop will give it an incredible turn of speed of over 100 mph. It is very quick, and seeing a model of this impressive size doing fast pylon turns near the ground is a sight to behold. Aerobatics are also a dream to perform, the rolls are very axial, and looping maneuvers are big due to the abundance of power. The only limitations to the aerobatics it will perform are your flying skills.

A replacement rudder with control horn for the H-King MX2 Extreme 30E.

A replacement carbon wing joining spar for the H-King MX2 Extreme 30E.

El H-King FG-1 Corsair "Lucky Gallon" es el tercero de la miniserie de H-King, los "Reno Aces", luchadores de la Segunda Guerra Mundial vestidos para impresionar en las carreras aéreas. El FG-1 Corsair "Lucky Gallon" con el motor sin escobillas 3108-1070KV de serie incluido ofrece un modelo realmente rápido desde el primer momento con velocidades cercanas a las 100mph cuando se usa el LiPo 4S de 2200mAh recomendado. Sin embargo, si tiene experiencia y está buscando velocidades de más de 100mph, entonces existe el motor sin escobillas 3108-1170KV 'Pro' de ajuste directo opcional. Esto le dará a su atractivo Reno Ace un rendimiento realmente balístico en la misma hélice, ESC y batería 4S para aquellos que pueden manejar el par de rotación adicional en el lanzamiento.

A replacement pre-painted wing complete with ailerons and factory-applied decals for the H-King FG-1 Corsair "Lucky Gallon".

The XFLY T-7A Red Hawk 750mm EDF jet is an easy-to-fly, versatile EDF trainer that will appeal to a wide variety of pilots, including those with limited experience in flying EDF jets. The 4S compatible power system includes a 12-bladed 64mm fan unit that delivers ample power for an abundance of thrust, speed, and an incredible turbine-like sound. The full-size Boeing-Saab T-7 Red Hawk (originally known as the Boeing T-X) is an American/Swedish advanced jet trainer that was designed to replace the popular Northrop T-38 Talon. The design is smaller, but very similar to the McDonnell Douglas F/A-18 with its large leading edge root extensions, and V-shaped twin vertical tail design. These design features give the full-size incredible maneuverability and excellent low-speed handling, these attributes carry over extremely well to the XFLY model of the T-7A Red Hawk.

Este pequeño avión de gran aspecto captura la época dorada de la aviación que se caracterizó por los cambios progresivos en los aviones civiles y militares. El Beechcraft D17S Staggerwing es un rápido biplano americano, cortesía de su grande pero ligero motor radial y también fue uno de los primeros en tener una cómoda cabina cerrada de estilo ejecutivo.