Aeronave

A replacement pair of engine/motor cowls for the AVIOS Albatross V2.

Note: These are suitable for the Albatross V1, but of course, the colors will be different.

A replacement pair of wing floats for the AVIOS Albatross V2.

Note: These are also suitable for the Albatross V1, but of course the colors are different.

A replacement clear water rudder with spring for the AVIOS Albatross V2.

Note: This is suitable for the Albatross V1 as well.

A replacement nose cone for the AVIOS Albatross V2.

Note: This is also suitable for the Albatross V1.

A replacement set of decals for the AVIOS Albatross V2 US Coast Guard Flying Boat. 

A replacement fuselage with decals and canopy for the US Coast Guard version of the Avios C-130 V2. This spare part is suitable for the original versions of the Avios C-130, but of course, the color scheme is quite different.

A replacement wing set with flaps, ailerons, and decals for the US Coast Guard version of the Avios C-130 V2. This spare part is suitable for the original versions of the Avios C-130, but of course, the color scheme is quite different.

A replacement engine nacelle and cowl for the US Coast Guard version of the Avios C-130 V2. This spare part is suitable for the original versions of the Avios C-130, but of course, the color scheme is quite different.

A replacement horizontal and vertical stabilizer set with elevators, rudder, and factory-applied decals for the US Coast Guard version of the Avios C-130 V2. Please note that this spare part is not suitable for the original versions of the C-130.

A replacement horizontal and vertical stabilizer set with elevators, rudder, and factory-applied decals for the Civilian Cargo version of the Avios C-130 V2.  Please note that this spare part is not suitable for the original versions of the C-130.

A replacement set of landing gear doors for the Civilian Cargo version of the Avios C-130 V2. This spare part is suitable for the original versions of the Avios C-130, but of course, the color scheme is quite different.

A replacement 6.5x5 4 blade standard pitch propeller with backplate and screw for both versions of the Avios C-130 V2, is also suitable for the version 1 of the C-130.

A replacement 6.5x5 4 blade reverse pitch propeller with backplate and screw for both versions of the Avios C-130 V2, is also suitable for the version 1 of the C-130.

A complete replacement nose landing gear set which includes servoless retract unit, gear doors, actuators, wiring, and housing for the US Coast Guard version of the Avios C-130 V2. This spare part is suitable for the original versions of the Avios C-130, but of course, the color scheme is quite different.

A replacement main landing gear set which includes servoless retract unit, actuating rods, wheels struts, and axles for the US Coast Guard version of the Avios C-130 V2. This spare part is suitable for the original versions of the Avios C-130, but of course, the color scheme is quite different.

A complete replacement set of decals for the Civilian Cargo version of the Avios C-130 V2.

A complete replacement set of decals for the US Coast Guard version of the Avios C-130 V2.

A replacement 2627-1000KV brushless motor with X mount and screws for both versions of the Avios C-130 V2, also suitable for the version 1 of the C-130.

A replacement prop adapter for both versions of the Avios C-130 V2, also suitable for the version 1 of the C-130.

A replacement carbon wing joining spar for both versions of the Avios C-130 V2, also suitable for the version 1 of the C-130.

A replacement set of scale detailing parts for the AVIOS KingTwin 1700.

A replacement set of 10x6 left and right propellers for the AVIOS KingTwin.

Please note: These propellers are also suitable for the AVIOS BushMule and Albatross models.

A replacement set of main and nosewheel landing gear struts for the AVIOS KingTwin. 

A replacement pre-painted fuselage for the Durafly Me-163B V2 "White 10" with tailwheel and factory-applied decals.

Please note:  This replacement part is also suitable for earlier versions of the Durafly Me-163, the color scheme will of course be different.

A replacement pre-painted canopy/battery hatch for the Durafly Me-163B V2 "White 10" with pilot, and factory-applied decals.

Please note: This replacement part is also suitable for earlier versions of the Durafly Me-163, the color scheme will of course be different.

A replacement pair of pre-painted wing panels for the Durafly Me-163B V2 "White 10" with elevons, and factory-applied decals.

Please note: This replacement part is also suitable for earlier versions of the Durafly Me-163, the color scheme will of course be different.

A replacement pre-painted vertical stabilizer for the Durafly Me-163B V2 "White 10" with rudder, and decals.

Please note: This replacement part is also suitable for earlier versions of the Durafly Me-163, the color scheme will of course be different.

A replacement pre-painted cowl for the Durafly Me-163B V2 "White 10".

Please note:  This replacement part is also suitable for earlier versions of the Durafly Me-163, the color scheme will of course be different.

A replacement pre-painted take-off dolly with wheels for the Durafly Me-163B V2 "White 10".

Please note:  This replacement part is also suitable for earlier versions of the Durafly Me-163, the color scheme will of course be different.

A replacement spinner for the Durafly Me-163B V2 "White 10".

Please note: This replacement part is also suitable for earlier versions of the Durafly Me-163, the color scheme will of course be different.

A replacement set of decals for the Durafly Me-163B V2 "White 10".

Please note:  This replacement part is also suitable for earlier versions of the Durafly Me-163.

A replacement aerial, and pitot head tube for the Durafly Me-163B V2 "White 10".

Please note: This replacement part is also suitable for earlier versions of the Durafly Me-163.

A replacement accessory set for the Durafly Me-163B V2 "White 10". Includes, hex-wrench, pushrods, snap links, control horns, and control horn mounting screws.

Please note: This replacement part is also suitable for earlier versions of the Durafly Me-163.

A replacement 2836-2200Kv brushless motor with prop adapter for the Durafly Me-163B V2 "White 10".

Please note: This replacement part is also suitable for earlier versions of the Durafly Me-163.

Presentación de nuestra MX2 3D PPE. Con un diseño y el diseño fantástico, todo esto a cabo PPE 3D'er respondiendo a los pilotos 3D más ansiosos!

Es fuselaje es muy rígido a la torsión con todo luz con un montón de espacio debajo de la escotilla superior largo de su radio y el sistema de alimentación. El ala es un asunto de una sola pieza con la construcción del PPE, un perfil simétrico muy preciso con 2 largueros adicionales para reducir al mínimo la flexión y giro. Las superficies de control son algo más - el elevador, timón y alerones cuentan con una construcción de 3 capas (EPP-Depron-PPE) haciendo para superficies rígidas y hay flexión en el extremo lanza! Ajustar rollos 'Snap' y la respuesta de control es instantánea.

La luz - sin embargo rígida - fuselaje se suma a una gran volar 'espumosa' 3D. Cascadas, aguiluchos, giros planos, círculos de rodadura este modelo tiene la precisión para llevar a cabo estos y otros movimientos que se pueda imaginar!

Montaje de la estructura del avión en un proceso rápido 10 a 15 minutos con la ayuda de un poco de medio CA. Los diseños de radio y sistemas de potencia son muy sencillas, la escotilla superior largo de decisiones para facilitar el acceso.

Este es un gran modelo para el vuelo en el parque general y 3D incondicional. Usted será muy difícil de romper este modelo, que se llevará a golpes duros y sólo mantener rebotando cada vez!


caracteristicas:
• material del EPP resistente, ligero y resistente al choque
• superficies rígidas de control compuesta PPE / Depron
• Diseño revolucionario se suma a la integridad estructural y la rigidez de la estructura del avión
• De peso ligero proporciona una óptima carga alar
• El rendimiento acrobático excepcional y maniobrabilidad 3D.
• El diseño simple permite un fácil acceso a los equipos y la instalación
• El esquema de color se destacan grandes para la orientación


Especificaciones:
Envergadura: 955mm
Longitud: 945 mm
Área de ala: 15.2dm2
Peso: 550g (sin batería)




Se requiere:
sistema de radio 4 canales
2217 950-1100KV sin escobillas outrunner
30amp ESC
3S 11.1V 1100-1300MAH Li-Po
10x4.7 / hélice 11x4.7
4 x servos 9g