Aeronave

A replacement main wing with pre-hinged ailerons for the Durafly Prime Tundra PT1200 STOL Trainer-Sports Model.

A replacement horizontal stabilizer with elevator, and carbon spar for the Durafly Prime Tundra PT1200 STOL Trainer-Sports Model.

A replacement pre-painted canopy for the Durafly Prime Tundra PT1200 STOL Trainer-Sports Model.

A replacement pre-painted FPV canopy/mount for the Durafly Prime Tundra PT1200 STOL Trainer-Sports Model.

A replacement 10x6 propeller for the Durafly Prime Tundra PT1200 STOL Trainer-Sports Model.

A replacement pre-painted motor cowl for the Durafly Prime Tundra PT1200 STOL Trainer-Sports Model.

One pair of replacement main wheels for the Durafly Prime Tundra PT1200 STOL Trainer-Sports Model.

Please note:  These wheels are also suitable for the other Tundra series of STOL models except the Grand Tundra.

Diameter: 120mm

A replacement linkage and screw set for the Durafly Prime Tundra PT1200 STOL Trainer-Sports Model.

One pair of replacement wing struts for the Durafly Prime Tundra PT1200 STOL Trainer-Sports Model.

A replacement propeller adapter for the Durafly Prime Tundra PT1200 STOL Trainer-Sports Model.

A replacement 3025-1000kV brushless motor for the Durafly Prime Tundra PT1200 STOL Trainer-Sports Model.

A replacement ORX 3-Axis gyro for the Durafly Prime Tundra PT1200 STOL Trainer-Sports Model.

Features:
• Gyro stability for roll, pitch, and yaw
• Small and lightweight
• Easy set-up
• 3 modes: Gyro off/Gyro on/Trainer mode

Gyro off means no stabilization from the gyro at all. Gyro on gives some gyro stability and full control surface deflection. Trainer mode gives a lot more gyro stability, and also limits the amount of control deflection, will also self-right the model to a normal flying attitude.

A complete replacement decal set for the Durafly Prime Tundra PT1200 STOL Trainer-Sports Model.

A replacement fuselage with vertical stabilizer and rudder for the Durafly Night Tundra STOL/Sports model.

A replacement wing set with hinges and control horns for the Durafly Night Tundra STOL/Sports model.

A replacement nose cowl for the Durafly Night Tundra STOL/Sports model.

A complete replacement decal set for the Durafly Night Tundra STOL/Sports model.

A replacement canopy/battery hatch with factory-installed magnetic catch for the Durafly Night Tundra STOL/Sports model.

A complete replacement set of LED lights with wiring and connectors for the Durafly Night Tundra STOL/Sports model. Also could be used on your existing Tundra or other models of a similar size.

El increíble Frenzy es el todoterreno perfecto. Con lanzamientos de control reducidos, es un avión suave, estable y notablemente fácil de volar que es perfecto para principiantes o principiantes. Aumente esos lanzamientos, y con su alta relación potencia-peso en una configuración 3S, el Frenzy hace honor a su nombre. Es capaz de realizar una amplia gama de asombrosas maniobras acrobáticas y satisfará las demandas incluso del piloto acrobático más ambicioso.

This beautiful model of a Grumman F8F Rare Bear Reno Racer with brushed 1020 motor, and 3D/6G gyro stabilization system not only looks great, but it flies great as well. The built-in switchable 6-axis gyro flight stabilization system makes it perfect for both beginners and experts alike. It is tough too, it's constructed from durable, crash-resistant EPP foam which is light, extremely strong, and ready to take all the knocks and bangs associated with learning to fly.

Este pequeño avión de gran aspecto captura la época dorada de la aviación que se caracterizó por los cambios progresivos en los aviones civiles y militares. El Beechcraft D17S Staggerwing es un rápido biplano americano, cortesía de su grande pero ligero motor radial y también fue uno de los primeros en tener una cómoda cabina cerrada de estilo ejecutivo.

The XFLY Partenavia P68 is a small, semi-scale twin-engined model that is perfect for flying in small areas such as local parks, sports fields, etc. It has been designed to be extremely easy to fly and assemble, which makes it perfect as an entry-level choice for the novice pilot. The design is based on the full-size Partenavia P68 which is a 6-seater, twin-engined high-wing monoplane that is generally used for light transport and training.

We have all had to start learning to fly an RC model at some point, and a stable, high-wing trainer that is very forgiving is what is required. The Dancing Wings Hobby Vogee-16 Trainer is the perfect choice for the rookie pilot. It has a large, flat-bottomed wing with dihedral which enables it to fly very slowly, and it has the stability to sort itself out if you get in a muddle. The Vogee's flying characteristics are very benign, beginners tend to over-control, and the Vogee is very gentle in its handling, especially if you install one of the readily available 3-axis gyros that are available on the market these days. It also has a tricycle landing gear with a steerable nosewheel which really helps with the take-offs and landings. This version of the Vogee is supplied with a powerful 2817-900KV brushless motor, a 60A brushless ESC, an 11" prop, 2 x 37g servos, and 2 x 17g 

The Dancing Wings Hobby Cute Girl laser cut balsa kit captures the type of vintage model airplane that was used in the early days of RC with radio assist. It has that classic retro look, lots of wing dihedral, band on wings, a large cabin, classic shapes to the wings and empennage, and tail dragger landing gear, all the features required for a retro classic look.

The controls are just basic 3 channels, rudder, elevator, and motor control, this keeps things nice and simple. We recommend that you power the Cute Girl with a brushless motor set-up. However, a nitro or a diesel engine can be used for that even more authentic vintage look and classic soundtrack.

The Dancing Wings Hobby Savage Bobber is a small, lightweight foam model that is quick and simple to build. The full-size Savage Bobber was devised by the Zlin Aviation Company. The Bobber as in the motorcycle world means that it is a stripped-down, customized version of an original. The Savage Bobber is a stripped-down, customized version of its older brother the Savage Classic. It is lighter, more maneuverable, and has a slightly narrower fuselage, and the absence of covering to the rear of the fuselage greatly improves the crosswind handling.

The model is reasonably straightforward to assemble, it is manufactured in pre-painted high-quality EPP foam sheet for the majority of the construction, tough plastic for the open framework rear fuselage, and lightweight balsa for the internal structure. Carbon strips are also included to reinforce and improve the stiffness of the structure. It builds up quickly into a good-looking, fun-to-fly lightweight (only 98g) sports plane that is perfect for indoor or park flying. This ARF kit is supplied with a powerful 1108-4000KV brushless motor, 5A brushless ESC, 5" propeller, and 4 x 2g servos.

After the incredible success of the Tundra V1 and V2, Durafly has decided to produce yet another version with even more improvements to bring the Tundra series bang up to date. The V3 is now a pure 4S set-up so it has power in abundance to make your flying even more fun than it was before (if that is at all possible!). Other changes and improvements include daylight bright LEDs (so bright they are suitable for true dawn-to-dusk flying), a reinforced nylon prop that is more efficient, and better balanced, a return to the classic EPO foam wheels which are lighter, and stronger, pre-installed pushrods, and hex-head bolts and screws throughout. The V3 is available in the classic Tundra green and white scheme, or a red and silver color scheme Durafly has called the "Inspire". The reason is that the original Tundra was "Inspired" by the "Highlander" full-size SuperStol experimental airplane.

After the incredible success of the Tundra V1 and V2, Durafly has decided to produce yet another version with even more improvements to bring the Tundra series bang up to date. The V3 is now a pure 4S set-up so it has power in abundance to make your flying even more fun than it was before (if that is at all possible!). Other changes and improvements include daylight bright LEDs (so bright they are suitable for true dawn-to-dusk flying), a reinforced nylon prop that is more efficient, and better balanced, a return to the classic EPO foam wheels which are lighter, and stronger, pre-installed pushrods, and hex-head bolts and screws throughout. The V3 is available in the classic Tundra green and white scheme, or a red and silver color scheme Durafly has called the "Inspire". The reason is that the original Tundra was "Inspired" by the "Highlander" full-size SuperStol experimental airplane.