Aeronave

The XFLY A-10 Thunderbolt II is a small, scale twin-EDF model of the iconic US Air Force close attack fighter that is perfect for flying in smaller areas such as local parks, sports fields, etc. The full-size A-10 Thunderbolt affectionately known as the "Warthog", was mainly used for close air support for ground troops and armored vehicles. It was highly maneuverable due to its large ailerons, was very tough and durable, could take a lot of punishment, and it "pièces de résistance" was the Gatling gun mounted in the nose. The actual airframe was designed around this high-powered 30mm gun, it was one of the most powerful guns ever fitted to a plane and could fire up to an amazing 4,200 rounds per minute.

The Dancing Wings Hobby Fokker Eindecker III is a scale model of the famous World War 1 monoplane fighter. The kit comes almost ready to fly and is constructed in balsa for a strong, lightweight, authentic structure. A lot of scale detail is supplied including, a dummy engine, scale wheels, and a dummy machine gun, plus a full accessory kit is also supplied which includes all the necessary hardware including scale rigging to complete the kit.

The Dancing Wings Hobby S.E.5A is a detailed scale model of the famous World War 1 biplane fighter. The kit comes almost ready to fly and is constructed in balsa for a strong, lightweight, authentic structure. A lot of scale detail is supplied including, scale exhausts, scale wheels, and a dummy machine gun, plus a full accessory kit is also supplied which includes all the necessary hardware including scale rigging to complete the kit.

We have all had to start learning to fly an RC model at some point, and a stable, high-wing trainer that is very forgiving is what is required. The Dancing Wings Hobby Vogee-16 Trainer is the perfect choice for the rookie pilot. It has a large, flat-bottomed wing with dihedral which enables it to fly very slowly, and it has the stability to sort itself out if you get in a muddle. The Vogee's flying characteristics are very benign, beginners tend to over-control, and the Vogee is very gentle in its handling, especially if you install one of the readily available 3-axis gyros that are available on the market these days. It also has a tricycle landing gear with a steerable nosewheel which really helps with the take-offs and landings. This version of the Vogee is supplied with a powerful 2817-900KV brushless motor, a 60A brushless ESC, an 11" prop, 2 x 37g servos, and 2 x 17g 

The Dancing Wings Hobby Stick-14T 3D aerobatic trainer is the perfect choice for intermediate and experienced RC pilots alike. It is based on the classic stick design and is quite capable of all the usual aerobatic maneuvers, plus with the right power train, it doubles up as the perfect 3D trainer. It has a very wide speed range, it is just as happy flying slowly as it is screaming about the sky. For added fun and enjoyment, the strip ailerons are split halfway making for outboard ailerons and inboard flaps. This allows for really slow or steep approach landings, and if the flaps are mixed in with your other controls it allows you to customize the handling to suit your own flying style. 

The Dancing Wings Hobby Cute Girl laser cut balsa kit captures the type of vintage model airplane that was used in the early days of RC with radio assist. It has that classic retro look, lots of wing dihedral, band on wings, a large cabin, classic shapes to the wings and empennage, and tail dragger landing gear, all the features required for a retro classic look.

The controls are just basic 3 channels, rudder, elevator, and motor control, this keeps things nice and simple. We recommend that you power the Cute Girl with a brushless motor set-up. However, a nitro or a diesel engine can be used for that even more authentic vintage look and classic soundtrack.

The Dancing Wings Hobby Aion laser cut balsa kit is an easy-build electric sports glider that includes ailerons and flaps. The Aion is aimed at the modeler who wants to experience real model-making but wants something that is reasonably straightforward to build. This is achieved with the use of accurate laser-cut parts and the simple box-type fuselage which produce a strong, accurate, lightweight structure. The Aion is relatively easy to build, however, we do recommend that some experience in building a wood model airplane has been gained previously. Most of the components are constructed over the detailed, high-quality printed 1:1 building plan. This outstanding kit is supplied with a powerful 2216-920KV brushless motor, a 30A brushless ESC, an 11" folding prop with metal spinner, 6 x 9g servos, and an iron-on covering film pack

The Dancing Wings Hobby Savage Bobber is a small, lightweight foam model that is quick and simple to build. The full-size Savage Bobber was devised by the Zlin Aviation Company. The Bobber as in the motorcycle world means that it is a stripped-down, customized version of an original. The Savage Bobber is a stripped-down, customized version of its older brother the Savage Classic. It is lighter, more maneuverable, and has a slightly narrower fuselage, and the absence of covering to the rear of the fuselage greatly improves the crosswind handling.

The model is reasonably straightforward to assemble, it is manufactured in pre-painted high-quality EPP foam sheet for the majority of the construction, tough plastic for the open framework rear fuselage, and lightweight balsa for the internal structure. Carbon strips are also included to reinforce and improve the stiffness of the structure. It builds up quickly into a good-looking, fun-to-fly lightweight (only 98g) sports plane that is perfect for indoor or park flying. This ARF kit is supplied with a powerful 1108-4000KV brushless motor, 5A brushless ESC, 5" propeller, and 4 x 2g servos.

The Dancing Wings Hobby Shining is a large lightweight profile-style foam kit that is quick and simple to build. It has been designed to be the perfect introduction to 3D flying and will perform extreme 3D maneuvers such as waterfalls, harriers, knife-edge loops, rolling circles, and much more.

The model is very straightforward to assemble, it is manufactured in pre-painted high-quality EPP foam sheet for the majority of the construction so the parts count is quite low, and carbon strips are supplied for strengthening. It builds up quickly into a good-looking, fun-to-fly lightweight extreme sport 3D plane that is perfect for park flying and on playing fields. This ARF model is supplied with a powerful 2216-950KV brushless motor, 30A brushless ESC, 10" propeller, and 4 x 9g servos.

A replacement fuselage for the H-King Yak-11 Steadfast Single-Seat Racer with elevator.

A pair of replacement wings for the H-King Yak-11 Steadfast Single-Seat Racer with ailerons, flaps, and quick-connect servo connectors.

Please note: The servos are not included.

A replacement horizontal stabilizer for the H-King Yak-11 Steadfast Single-Seat Racer with elevator.

A replacement vertical stabilizer with rudder for the H-King Yak-11 Steadfast Single-Seat Racer.

A replacement canopy and battery hatch for the H-King Yak-11 Steadfast Single-Seat Racer.

A replacement pair of CNC machined oleo struts for the H-King Yak-11 Steadfast Single-Seat Racer with wheels and doors.

Please note: The servoless retracts are not included.

A replacement electric servoless retract unit for the H-King Yak-11 Steadfast Single-Seat Racer.

Please note: This is a single unit and not a pair.

A replacement wood wing-joining spar for the H-King Yak-11 Steadfast Single-Seat Racer.

A replacement set of pushrods with ball-links, nuts, and bolts for the H-King Yak-11 Steadfast Single-Seat Racer (7pcs).

A replacement set of screws, nuts and bolts for the H-King Yak-11 Steadfast Single-Seat Racer (14pcs).

A replacement decal set for the H-King Yak-11 Steadfast Single-Seat Racer.

A replacement red spinner for the H-King Yak-11 Steadfast Single-Seat Racer.

A replacement motor cowl for the H-King Yak-11 Steadfast Single-Seat Racer.

A replacement 16x6 propeller for the H-King Yak-11 Steadfast Single-Seat Racer.

A replacement 5020-550KV brushless motor for the H-King Yak-11 Steadfast Single-Seat Racer.

A replacement brushless motor hardware set for the H-King Yak-11 Steadfast Single-Seat Racer that includes a, X-mount, prop-adapter, and other hardware.

A replacement steerable tailwheel assembly for the H-King Yak-11 Steadfast Single-Seat Racer that includes the tailwheel, and steering-arm.

A replacement scale parts set for the H-King Yak-11 Steadfast Single-Seat Racer.

A replacement fuselage with wiring for the grey XFLY Alpha Jet.

A replacement fuselage with wiring for the blue "Patrouille de France" XFLY Alpha Jet.

A replacement pair of wings with flaps and ailerons for the grey XFLY Alpha Jet.

A replacement pair of wings with flaps and ailerons for the blue "Patrouille de France" XFLY Alpha Jet.

A replacement pair of horizontal stabilizers for the grey XFLY Alpha Jet.

A replacement pair of horizontal stabilizers for the blue "Patrouille de France" XFLY Alpha Jet.

A replacement vertical stabilizer with rudder for the grey XFLY Alpha Jet.

A replacement vertical stabilizer with rudder for the blue "Patrouille de France" XFLY Alpha Jet.