Fahrzeuge

Auspuff-Halter 16.01 Turnigy 4WD Nitro Racing Buggy (1pcs / Beutel)
Art.-Nr .: 30812

Light Set (Complete) - A2033 (1Paar)

Quanum Skull Crusher 2WD - Antriebswelle / CVJ

A2032 und A2033 33434 CVD

Clutch Gears 14T - A3015

Metallrück Shock Shaft - A3015 (2 Stück)

Volllegierungs-Metallspurstangenhebel L / R - A2038 & A3015 (1Paar)

Vorne C Hub L / R - Nitro Circus Basher 1/8 Skala Monster Truck, Sabertooth Truggy

Knuckles Lenkung - Nitro Circus Basher 1/8 Skala Monster Truck, Sabertooth Truggy

Big Hex Radmuttern - Nitro Circus Basher 1/8 Skala Monster Truck, Sabertooth Truggy (4 Stück)

Basher Nitro Circus MT, Sabertooth Truggy - Radnaben

Hinten Outdrive - Nitro Circus Basher 1/8 Skala Monster Truck, Sabertooth Truggy (2 Stück)

Dogbones Cup - Nitro Circus Basher 1/8 Skala Monster Truck, Sabertooth Truggy

Basher Nitro Circus MT, Sabertooth Truggy - Outdrive Unterlegscheiben

Diff. Box Dichtung - Nitro Circus Basher 1/8 Skala Monster Truck, Sabertooth Truggy (6pcs)

Zahnrad 44T Spur - Nitro Circus Basher 1/8 Skala Monster Truck, Sabertooth Truggy

Basher Nitro Circus MT, Sabertooth Truggy - Mitte Diff. outdrive

Lenkgestänge Plate - Nitro Circus Basher 1/8 Skala Monster Truck, Sabertooth Truggy

Getriebe Unterlegscheiben (13.2 * 16 * 0,2) - Nitro Circus Basher 1/8 Skala Monster Truck, Sabertooth Truggy (10 Stück)

Pins - Nitro Circus Basher 1/8 Skala Monster Truck (10 Stück)

Bestell - Nr .: BS33516

Servo Linkage - Nitro Circus Basher 1/8 Skala Monster Truck (4 Stück)

Bestell - Nr .: BS33519

Manifold 1set (Vernickelung) - A3007

One Way Ball Bearing - Trooper Nitro

The motor is a powerful, high torque open brush gear 540 motor, brushes can be changed when they wear out and this is matched to a 60amp ESC. The Trackstar Crawler ESC has been specifically designed for RC crawlers and brushed motors. It gives an excellent linear response and driving feel, has a low internal resistance, excellent heat dissipation, and multiple protection features (see features below). It can be easily programmed with the optional pocket-sized LED program card (see related items) with a variety of different settings including; Initial Start Force, Low Voltage Cut-Off, Initial Drag Brake Force, Maximum Reverse Force, and 3 Start Modes.

The motor is a powerful, high torque open brush gear 540 motor, brushes can be changed when they wear out and this is matched to a 60amp ESC. The Trackstar Crawler ESC has been specifically designed for RC crawlers and brushed motors. It gives an excellent linear response and driving feel, has a low internal resistance, excellent heat dissipation, and multiple protection features (see features below). It can be easily programmed with the optional pocket-sized LED program card (see related items) with a variety of different settings including; Initial Start Force, Low Voltage Cut-Off, Initial Drag Brake Force, Maximum Reverse Force, and 3 Start Modes.

The motor is a powerful, high torque open brush gear 540 motor, brushes can be changed when they wear out and this is matched to a 60amp ESC. The Trackstar Crawler ESC has been specifically designed for RC crawlers and brushed motors. It gives an excellent linear response and driving feel, has low internal resistance, excellent heat dissipation and multiple protection features (see features below). It can be easily programmed with the optional pocket sized LED program card (see related items) with a variety of different settings including; Initial Start Force, Low Voltage Cut-Off, Initial Drag Brake Force, Maximum Reverse Force and 3 Start Modes.

Der EAZYRC Arizona im Maßstab 1:18 bietet aufgrund seines Allradantriebs, der Einzelradaufhängung und der leistungsstarken Motorabstimmung eine hervorragende Offroad-Performance. Diese Motorabstimmung sorgt für Dauerleistung mit ausreichend Reserven beim Bergsteigen und beim Felskrabbeln.

Arizona kommt "Ready to Run" und beinhaltet den Motor, ESC, Lenkservo und 2.4 GHz Sender und Empfänger. Die RC-Einheit bietet eine vollproportionale Lenk- und Geschwindigkeitsregelung und voll funktionsfähige LED-Leuchten werden für diesen realistischen Skaleneffekt mitgeliefert. Dank der mitgelieferten Gummireifen mit hoher Traktion können Sie alle Arten von Gelände problemlos erobern, einschließlich Sand, Schlamm, Gras und Schnee.

1:18 scale Rock Crawlers have become very popular over the last few years, FMS has become part of this fast-growing side of the RC hobby with this incredible, officially licensed classic 4WD Toyota FJ Cruiser. FMS is one of the most experienced RC manufacturers on the market today, and this replica's attention to detail is second to none. The full-size retro-style FJ Cruiser SUV concept arrived in the early 2000s, the designers wanted to resurrect the popular traits of the iconic FJ40. The FMS 1:18 scale replica perfectly captures the essence of the full-scale Toyota FJ Cruiser design. The accurate details include the classic yellow and white paint scheme, the scale roof luggage rack, snorkel, footrests, heavy-duty front bumper, and spare tire. The realism continues into the interior with the detailed center console, rearview mirror, and authentic-looking seats.

1:24 scale Rock Crawlers have become very popular over the last few years, FMS has become part of this fast-growing side of the RC hobby with this meticulously designed small, but mighty FCX24 Power Wagon. FMS is one of the most experienced RC manufacturers today, and this replica's attention to detail is second to none. The full-size Power Wagon originally started production in 1945, the FMS version depicts the type that became available in around 1949. This model perfectly captures the essence of the full-scale Power Wagon design, which appeared as a mud off-road truck. Its realism is beyond expectations with the accurate details including, non-slip footplates, snorkel, windscreen wipers, and spare (useable) wheel and tire.

1:24 scale Rock Crawlers have become very popular over the last few years, FMS has become part of this fast-growing side of the RC hobby with this Chevrolet officially authorized FCX24 K5 Blazer. FMS is one of the most experienced RC manufacturers today, and this replica's attention to detail is second to none. Chevrolet's first-generation K5 Blazer appeared in 1969 and was the most compact SUV on the market at the time. It was designed as a sport utility vehicle with excellent off-road ability and opened up the joy of adventure and the great outdoors to many, many people. This FMS model perfectly captures the essence of the full-scale K5 Blazer design, its realism is beyond expectations with accurate details including a detachable rear cargo bed hardtop, large diameter wheels, rearview mirrors, roll-bar w/lights (for when the hardtop is removed), and special electroplated parts including the wheels to add amazing realism.

The Rocket Surpass range of brushless motors is precision-made using the latest manufacturing processes. The heatsink can is CNC machined from a solid billet of 6061 T6 aluminum, high-purity copper is used for the windings for improved efficiency, and oversized bearings are used for durability. The stator has super thin (0.2mm) laminations, and the rotor is then precision balanced for reliability, and ultra-smooth running at maximum RPMs.

The Rocket Surpass 4076-2025KV motor has been specially built for 1/8th scale monster trucks and truggies. This 4-pole, 12-slot high-torque motor is water and dust-proof and features a universal mounting system to fit just about all 1/8th-scale vehicles.

Specs:
Type: Turnigy TrackStar Modified 540 Sensored Brushless Motor
Scale: 1/10th (modified class)
Poles: 2
Turns: 4.5
KV: 7800KV
Sensored: Yes (Standard 6-pin lead)
Sensor Lead: Included
Input Voltage: 3.7~7.4V (1~2S)
Max Current: 108A
Max Watts: 490
Resistance: 0.0029 ODM
Motor Diameter: 35.8mm
Motor Length: 52mm
Shaft Diameter: 3.175mm
Shaft Length: 13.9mm
Mounting Screw Threads: 6 x M3
Mounting Screw Centers: 25.2mm
Weight: 165g

Specs:
Type: Turnigy TrackStar Modified 540 Sensored Brushless Motor
Scale: 1/10th (modified class)
Poles: 2
Turns: 5.5
KV: 6300KV
Sensored: Yes (Standard 6-pin lead)
Sensor Lead: Included
Input Voltage: 3.7~7.4V (1~2S)
Max Current: 108A
Max Watts: 430
Resistance: 0.0041 ODM
Motor Diameter: 35.8mm
Motor Length: 52mm
Shaft Diameter: 3.175mm
Shaft Length: 13.9mm
Mounting Screw Threads: 6 x M3
Mounting Screw Centers: 25.2mm
Weight: 165g

Specs:
Type: Turnigy TrackStar Modified 540 Sensored Brushless Motor
Scale: 1/10th (modified class)
Poles: 2
Turns: 8.5
KV: 4350KV
Sensored: Yes (Standard 6-pin lead)
Sensor Lead: Included
Input Voltage: 3.7~11.1V (1~3S)
Max Current: 80A
Max Watts: 340
Resistance: 0.0098 ODM
Motor Diameter: 35.8mm
Motor Length: 52mm
Shaft Diameter: 3.175mm
Shaft Length: 13.9mm
Mounting Screw Threads: 6 x M3
Mounting Screw Centers: 25.2mm
Weight: 165g

Specs:
Type: Turnigy TrackStar Modified 540 Sensored Brushless Motor
Scale: 1/10th (modified class)
Poles: 2
Turns: 10.5
KV: 4300KV
Sensored: Yes (Standard 6-pin lead)
Sensor Lead: Included
Input Voltage: 7.4~11.1V (2~3S)
Max Current: 63A
Max Watts: 250
Resistance: 0.0151 ODM
Motor Diameter: 35.8mm
Motor Length: 52mm
Shaft Diameter: 3.175mm
Shaft Length: 13.9mm
Mounting Screw Threads: 6 x M3
Mounting Screw Centers: 25.2mm
Weight: 160g

Specs:
Type: Turnigy TrackStar Stock 540 Sensored Brushless Motor
Scale: 1/10th (stock class)
Poles: 2
Turns: 13.5
KV: 3600KV
Sensored: Yes (Standard 6-pin lead)
Sensor Lead: Included
Input Voltage: 7.4~11.1V (2~3S)
Max Current: 48A
Max Watts: 190
Resistance: 0.0219 ODM
Motor Diameter: 35.8mm
Motor Length: 52mm
Shaft Diameter: 3.175mm
Shaft Length: 13.9mm
Mounting Screw Threads: 6 x M3
Mounting Screw Centers: 25.2mm
Weight: 158g