Schnäppchen Kasten

This optional CNC main gear set with oleo, wheels, and shock absorption for the XFLY Sukhoi Su-27 Flanker will make for smoother take-offs and landings, they also look great as well.

The Rhino VE40A electronic speed controller with 32-bit MCU has been designed primarily for competitive 1/10, and 1/12 RC rock crawlers, but it is also very suitable for other types of cars and trucks. The preloaded AM32 custom firmware is optimized for RC rock crawlers, but the firmware can be configured for other applications by using the DYS USB-Link (not supplied).

This Bluetooth module makes the programming of your Aerostar RVS G2 HV electronic speed controller extremely easy, simply download the Aerostar App to your Android smartphone or smart device and you are ready to connect and set up your ESC (see under the "Files" tab for the link to the App).

Programmable settings using the Bluetooth module:
• Brake Type: Off/Soft/Mid/Hard
• Motor Timing: Auto/High/Mid/Low
• Motor Rotation: CW/CCW
• HEF (High Efficiency Function: On/Off
• Cell Count (HV Version): Auto/6S/8S/10S/12S/14S
• LVC (Low Voltage Cut-Off/HV): Off/2.3V/2.5V/3V/3.2V/3.2V/3.4V/3.6V
• Voltage Cut-Off Type: Reduce Power/Cut-Off Power
• Start-Up Power: Low/Med/Hard
• Restore Factory Defaults

The G2 HV factory defaults are shown in "Bold".

Please note: This Bluetooth module is only compatible with the Aerostar RVS G2 HV ESC range. It is incompatible with the non-HV series of G2 ESCs, earlier versions of the Aerostar RVS HV ESC, or the ZTW brand of ESC..

A replacement horizontal stabilizer with elevators for the 1000mm XFLY A-10 Thunderbolt II Twin.

A replacement pair of vertical stabilizers for the 1000mm XFLY A-10 Thunderbolt II Twin.

A replacement battery hatch and cockpit with pilot for the 1000mm XFLY A-10 Thunderbolt II Twin.

A replacement nose, and main gear wheels for the 1000mm XFLY A-10 Thunderbolt II Twin.

A replacement set of 16 screws for the 1000mm XFLY A-10 Thunderbolt II Twin.

A replacement landing gear set with nose, and main gear legs with wheels for the 1000mm XFLY A-10 Thunderbolt II Twin.

A replacement fuselage with wiring harness for the XFLY F-22 Raptor Twin 40mm EDF Jet 702mm.

Please note: The nose cone is not supplied with the fuselage.

A replacement pair of main wings for the XFLY F-22 Raptor Twin 40mm EDF Jet 702mm.

A replacement pair of horizontal stabilizers with fixings for the XFLY F-22 Raptor Twin 40mm EDF Jet 702mm.

A replacement pair of vertical stabilizers for the XFLY F-22 Raptor Twin 40mm EDF Jet 702mm.

A replacement cockpit and battery hatch for the XFLY F-22 Raptor Twin 40mm EDF Jet 702mm.

A replacement nose cone for the XFLY F-22 Raptor Twin 40mm EDF Jet 702mm.

A replacement linkage set with ballinks for the XFLY F-22 Raptor Twin 40mm EDF Jet 702mm (4pcs).

A replacement set of landing gear with wheels for the XFLY F-22 Raptor Twin 40mm EDF Jet 702mm.

A replacement set of horizontal stabilizer rotating shafts for the XFLY F-22 Raptor Twin 40mm EDF Jet 702mm.

A replacement nose, and main wheels for the XFLY F-22 Raptor Twin 40mm EDF Jet 702mm.

Turnigy Slowfly Propeller 7x3.8 Pusher Black (4pcs).

The Rocket Surpass range of brushless motors is precision-made using the latest manufacturing processes. The heatsink can is CNC machined from a solid billet of 6061 T6 aluminum, high-purity copper is used for the windings for improved efficiency, and oversized bearings are used for durability. The stator has super thin (0.2mm) laminations, and the rotor is then precision balanced for reliability, and ultra-smooth running at maximum RPMs.

The Rocket Surpass range of brushless motors is precision-made using the latest manufacturing processes. The heatsink can is CNC machined from a solid billet of 6061 T6 aluminum, high-purity copper is used for the windings for improved efficiency, and oversized bearings are used for durability. The stator has super thin (0.2mm) laminations, and the rotor is then precision balanced for reliability, and ultra-smooth running at maximum RPMs.

The Rocket Surpass 4076-2025KV motor has been specially built for 1/8th scale monster trucks and truggies. This 4-pole, 12-slot high-torque motor is water and dust-proof and features a universal mounting system to fit just about all 1/8th-scale vehicles.

The Rocket Surpass range of brushless motors is precision-made using the latest manufacturing processes. The heatsink can is CNC machined from a solid billet of 6061 T6 aluminum, high-purity copper is used for the windings for improved efficiency, and double-shielded oversized bearings are used for durability. The motor includes sintered neodymium magnets, the stator has super thin (0.2mm) laminations, and the rotor is precision balanced for reliability, and ultra-smooth running at maximum RPMs.

The Rocket Surpass 5065-236KV motor suits sport, scale, and 3D-type models. This robust motor suits LiPo batteries up to 10S, on test with a 10S battery it produced an incredible 2000 watts of power at 57A, making it a great motor for the larger models. The motor is supplied with a machined prop adapter, complete with mounting bolts, allowing it to be mounted either way round.

This high-quality all-metal fan unit uses the latest technology and high-grade aluminum alloy to ensure a powerful, smooth-running unit. It is built to the highest of standards, and each blade is precision made to generate the best airflow, and to a rigorous 8-hour fatigue test before installation.

The highly rigid structure is capable of running at a very high RPM which produces an extremely high efflux velocity for maximum speed and efficiency. The design includes an anti-disintegrating safety feature that will stop a blade from flying out of the shroud in the unlikely case of failure. The shroud itself acts as a heatsink for the motor and each unit has been dynamically balanced to ensure smooth running and a long lifespan for both the fan unit and the motor.

The Rocket Surpass range of brushless motors is precision-made using the latest manufacturing processes. The heatsink can is CNC machined from a solid billet of 6061 T6 aluminum, high-purity copper is used for the windings for improved efficiency, and oversized ABEC5 high-speed bearings are used for durability. The stator has super thin (0.35mm) laminations, and the rotor is then precision balanced for reliability and ultra-smooth running at maximum RPMs.

The Rocket Surpass KK2845-5900KV motor has been specially built for 1/12~14th size RC cars and trucks and is totally waterproof for use in extreme conditions. This powerful 4-pole, 12-slot motor features a universal mounting system so that it will fit just about all 1/12~14th scale vehicles.

The Rocket Surpass range of brushless motors is precision-made using the latest manufacturing processes. The heatsink can is CNC machined from a solid billet of 6061 T6 aluminum, high-purity copper is used for the windings for improved efficiency, and oversized ABEC5 high-speed bearings are used for durability. The stator has super thin (0.35mm) laminations, and the rotor is then precision balanced for reliability and ultra-smooth running at maximum RPMs.

The Rocket Surpass 3650-5400KV motor has been specially built for 1/10th size RC cars and trucks and is water and dust-resistant for use in demanding conditions. This powerful 4-pole, 12-slot motor features a universal mounting system so that it will fit just about all 1/10th scale vehicles.

The Rocket Surpass range of brushless motors is precision-made using the latest manufacturing processes. The heatsink can is CNC machined from a solid billet of 6061 T6 aluminum, high-purity copper is used for the windings for improved efficiency, and oversized ABEC5 high-speed bearings are used for durability. The stator has super thin (0.35mm) laminations, and the rotor is then precision balanced for reliability and ultra-smooth running at maximum RPMs.

The Rocket Surpass 3660-4500KV motor has been specially built for 1/10th size RC cars and trucks and is water and dust-resistant for use in demanding conditions. This powerful 3T, 4-pole, 12-slot motor features a universal mounting system so that it will fit just about all 1/10th scale vehicles.

A strong, well-made neck strap that suits a multitude of transmitters including the FrSky X14 series and many, many more. It includes the Turnigy logo, a quick-release connector, and a sliding, clasp to hook onto the transmitter neck strap attachment.

Experience extreme speed and reliability with JP Hobby's premium Electric Ducted Fan (EDF) units, now available at Hobbyking. Meticulously crafted from high-grade aluminum alloy, these EDFs deliver the perfect balance of lightweight construction and rigid durability. The innovative shroud design doubles as an integrated heat sink, dramatically improving motor cooling for enhanced performance and extended lifespan - making it the ultimate choice for high-power applications.

An ACE RC Ripper 3720-1100KV brushless motor with prop shaft to upgrade your  H-King MX2 Extreme 30E.

The RadioMaster RP V2 series of receivers now have a built-in TCXO (Temperature-Compensated Xtal Oscillator). The TCXO ensures high stability and accuracy in frequency control and compensates for temperature variations. This results in consistent and reliable signal reception, even in extreme temperature conditions. It also reduces frequency drift over time, providing long-term frequency stability and preventing signal degradation. This provides a superior performance in demanding environments and enhances the flight experiences.

The RP2 2.4GHz ELRS Nano receivers use the high-performance, revolutionary ExpressLRS open-source system. The Nano receivers were designed by the ExpressLRS development team, and feature the ESP8285 MCU and SX1280 RF chips. WiFi is built-in so that you can easily upgrade the firmware and configure the receiver using your PC or mobile phone. Other features of the RP2 V2 are improved solder pads and a super lightweight built-in ceramic antenna.

The RP3 2.4GHz ELRS Nano receivers use the high-performance, revolutionary ExpressLRS open-source system. The ExpressLRS development team designed the Nano receivers, which feature the ESP8285 MCU and SX1280 RF chips. This offers Lora and FLRC 2.4GHz RF links for incredible range and low latency. WiFi is built-in to easily upgrade the firmware and configure the receiver using your PC or mobile phone.

The receiver features a Skyworks SE2431L providing an LNA for improved receiver performance, a PA providing up to 100mW of telemetry performance, and antenna switching for antenna diversity.. The RP3 Nano receiver is available in either an FCC or a European LBT version, please check the specifications below for the supported protocol.

A replacement short 5mm flexi-shaft for the 2024 version of the HydroPro Inception. Please see the attached pictures for the version that this suits.

A replacement fuselage with wiring for the blue "Patrouille de France" XFLY Alpha Jet.