パワーシステム

Looking for an inexpsensive motor replacement for your basher? These are just what the doctor ordered! These sensorless brushless motors are fitted with precision bearings, correctly rated magnets, balanced rotors, and premium grade steel shafts.

The FrSky Taranis Q X7S is the next step on from the original Taranis Q X7 and comes in a stunning blue case. It also keeps all the cool features of the Taranis Q X7 but adds even more stunning features. It still has all the usual Taranis features in this radio such as Receiver Signal Strength Indicator (RSSI) alerts, Real-time Flight Data Logging and receiver matching.

Turnigy SK3モーターズは、モータの品質とデザインで、前方の次の飛躍です。私たちはそれらに利用可能な最高品質の磁石、ベアリングや材料を調達し、モータだろうだけでなく、ライバルを開発し、多くの大手モーターの品質は、今日市場に製造凌駕する技術者に指示しました。

その結果、品質ダブルシールド付きベアリング、焼結ネオジム磁石と毎回を巻き、正確で一貫性を確保した文字列に巻かれたステータを使用して、効率的、高口径のモータです。

Turnigy SK3モータは、妥協のない品質のブラシレスモータを求めているモデラーに適しています。

仕様。
オン：12Tを
電圧：2〜3S Lipoly
RPM / V：1040 KV
内部抵抗：0.075オーム
マックスロード：28A
最大出力：335W
シャフト径：3.175ミリメートル
ボルト穴：16ミリメートル＆19ミリメートル
ボルトねじ：M3
重量：80グラム
モータープラグ：3.5ミリメートルブレットコネクタ

Turnigy SK3モーターズは、モータの品質とデザインで、前方の次の飛躍です。私たちはそれらに利用可能な最高品質の磁石、ベアリングや材料を調達し、モータだろうだけでなく、ライバルを開発し、多くの大手モーターの品質は、今日市場に製造凌駕する技術者に指示しました。

その結果、品質ダブルシールド付きベアリング、焼結ネオジム磁石と毎回を巻き、正確で一貫性を確保した文字列に巻かれたステータを使用して、効率的、高口径のモータです。

Turnigy SK3モータは、妥協のない品質のブラシレスモータを求めているモデラーに適しています。

仕様。
オン：14Tを
電圧：3〜4S Lipoly
RPM / V：1200 KV
内部抵抗：0.028オーム
マックスロード：38A
最大出力：560W
シャフト径：5.0ミリメートル
ボルト穴：25ミリメートル
ボルトねじ：M3
重さ：111グラム
モータープラグ：3.5ミリメートルブレットコネクタ

Turnigy SK3モーターズは、モータの品質とデザインで、前方の次の飛躍です。私たちはそれらに利用可能な最高品質の磁石、ベアリングや材料を調達し、モータだろうだけでなく、ライバルを開発し、多くの大手モーターの品質は、今日市場に製造凌駕する技術者に指示しました。

その結果、品質ダブルシールド付きベアリング、焼結ネオジム磁石と毎回を巻き、正確で一貫性を確保した文字列に巻かれたステータを使用して、効率的、高口径のモータです。

Turnigy SK3モータは、妥協のない品質のブラシレスモータを求めているモデラーに適しています。

仕様。
オン：12Tを
電圧：3〜4S Lipoly
RPM / V：1400 KV
内部抵抗：0.021オーム
マックスロード：40A
最大出力：590W
シャフト径：5.0ミリメートル
ボルト穴：25ミリメートル
ボルトねじ：M3
重さ：110グラム
モータープラグ：3.5ミリメートルブレットコネクタ

Turnigy SK3モーターズは、モータの品質とデザインで、前方の次の飛躍です。私たちはそれらに利用可能な最高品質の磁石、ベアリングや材料を調達し、モータだろうだけでなく、ライバルを開発し、多くの大手モーターの品質は、今日市場に製造凌駕する技術者に指示しました。

その結果、品質ダブルシールド付きベアリング、焼結ネオジム磁石と毎回を巻き、正確で一貫性を確保した文字列に巻かれたステータを使用して、効率的、高口径のモータです。

Turnigy SK3モータは、妥協のない品質のブラシレスモータを求めているモデラーに適しています。

仕様。
オン：10Tを
電圧：3〜4S Lipoly
RPM / V：1185kv
内部抵抗：0.024Ohm
マックスロード：49A
最大出力：730W
シャフト径：5.0ミリメートル
ボルト穴：25ミリメートル
ボルトねじ：M3
重さ：141グラム
モータープラグ：3.5ミリメートルブレットコネクタ

Turnigy SK3モーターズは、モータの品質とデザインで、前方の次の飛躍です。私たちはそれらに利用可能な最高品質の磁石、ベアリングや材料を調達し、それだけではなくだろうライバルモーターを開発するエンジニアを指示したが、今日の市場で多くの大手自動車メーカーの品質を上回ります。

その結果、品質ダブルシールド付きベアリング、焼結ネオジム磁石と毎回を巻き、正確で一貫性を確保した文字列に巻かれたステータを使用して、効率的、高口径のモータです。

Turnigy SK3モータは、妥協のない品質のブラシレスモータを求めているモデラーに適しています。

仕様。
オン：18Tを
電圧：10S Lipoly
RPM / V：190kv
内部抵抗：0.028オーム
マックスロード：65A
最大出力：2450W
シャフト径：8.0ミリメートル
ボルト穴：32ミリメートル
ボルトねじ：M4
重さ：697グラム
モータープラグ：4ミリメートルブレットコネクタ

The Turnigy TrackStar range of 1/10th Brushed Motors is ideal for those that require a no-nonsense motor that will power your vehicle in any conditions. These motors are an ideal solution for backyard bashers or anyone wanting to cross rivers or travel in a wet environment.

The Turnigy TrackStar range of 1/10th Brushed Motors is ideal for those that require a no-nonsense motor that will power your vehicle in any conditions. These motors are an ideal solution for backyard bashers or anyone wanting to cross rivers or travel in a wet environment.

The Turnigy TrackStar range of 1/10th Brushed Motors is ideal for those that require a no-nonsense motor that will power your vehicle in any conditions. These motors are an ideal solution for backyard bashers or anyone wanting to cross rivers or travel in a wet environment.

The Turnigy TrackStar range of 1/10th Brushed Motors is ideal for those that require a no-nonsense motor that will power your vehicle in any conditions. These motors are an ideal solution for backyard bashers or anyone wanting to cross rivers or travel in a wet environment.

The Turnigy TrackStar range of 1/10th Brushed Motors is ideal for those that require a no-nonsense motor that will power your vehicle in any conditions. These motors are an ideal solution for backyard bashers or anyone wanting to cross rivers or travel in a wet environment.

The Dr. Mad Thrust EDF series are pre-assembled and dynamically balanced making them easy to fit, with no unit assembly required. As well as high power, these fans have excellent cooling and run so smoothly, the sound is amazing. There is also no housing distortion, unlike plastic fans. This high quality, powerful fan is a great way to upgrade your 70mm EDF jet to a speeding missile in around an hour!

The Dr. Mad Thrust EDF series are pre-assembled and dynamically balanced making them easy to fit, with no unit assembly required. As well as high power, these fans have excellent cooling and run so smoothly, the sound is amazing. There is also no housing distortion, unlike plastic fans. This high quality, powerful fan is a great way to upgrade your 70mm EDF jet to a speeding missile in around an hour!

FLYSKYパラディンPL18リモートコントロールラジオは、精密飛行用に設計されています。強力なタッチスクリーン設定で直感的に操作できるように設計されています。パラディンには18チャンネルとAFHDS3プロトコルが付属しています。飛行機、ヘリコプター、グライダー、デルタウィング、マルチコプター、エンジニアリングビークルから選択できる6つのモデルタイプがあり、真に用途の広いラジオを実現します。パッケージには、FTr10とFTr16の2つのレシーバーも付属しています。

The FLYSKY Paladin PL18 Remote Control Radio is designed for precision flying. It was engineered to be intuitive with a powerful touch screen setup. The Paladin comes with 18 channels and AFHDS 3 protocol. There are six model types to choose from Airplane, Helicopter, Glider, Delta Wing, Multicopter, and Engineering Vehicles making for a truly versatile Radio. The package also comes with two receivers, the FTr10 and FTr16s.

The motor is a powerful, high torque open brush gear 540 motor, brushes can be changed when they wear out and this is matched to a 60amp ESC. The Trackstar Crawler ESC has been specifically designed for RC crawlers and brushed motors. It gives an excellent linear response and driving feel, has a low internal resistance, excellent heat dissipation, and multiple protection features (see features below). It can be easily programmed with the optional pocket-sized LED program card (see related items) with a variety of different settings including; Initial Start Force, Low Voltage Cut-Off, Initial Drag Brake Force, Maximum Reverse Force, and 3 Start Modes.

The motor is a powerful, high torque open brush gear 540 motor, brushes can be changed when they wear out and this is matched to a 60amp ESC. The Trackstar Crawler ESC has been specifically designed for RC crawlers and brushed motors. It gives an excellent linear response and driving feel, has a low internal resistance, excellent heat dissipation, and multiple protection features (see features below). It can be easily programmed with the optional pocket-sized LED program card (see related items) with a variety of different settings including; Initial Start Force, Low Voltage Cut-Off, Initial Drag Brake Force, Maximum Reverse Force, and 3 Start Modes.

The motor is a powerful, high torque open brush gear 540 motor, brushes can be changed when they wear out and this is matched to a 60amp ESC. The Trackstar Crawler ESC has been specifically designed for RC crawlers and brushed motors. It gives an excellent linear response and driving feel, has low internal resistance, excellent heat dissipation and multiple protection features (see features below). It can be easily programmed with the optional pocket sized LED program card (see related items) with a variety of different settings including; Initial Start Force, Low Voltage Cut-Off, Initial Drag Brake Force, Maximum Reverse Force and 3 Start Modes.

An excellent open carbon brush gear 540 35T motor that has been designed for, and is perfect for RC crawlers. Having the brush gear open means that maintenance, cleaning, and brush changing is a very simple task. The low 1320KV means masses of low down torque which makes it ideal for climbing steep and rough terrain at controllable low speeds.

PROPDRIVE v2 motors are designed to perform right out of the box with tight windings, smooth bearings, correctly rated magnets, precision cut stator, and balanced rotors.

We design and build the PROPDRIVE v2 motors in-house, allowing us to control every aspect of production. We control the entire production line from material sourcing to machining, balancing, and final assembly. PROPDRIVE motors can be trusted to provide years of reliable service at a price every modeler can afford.

Performance Data (5S):
15x6: 796W, 45A, 3338g static thrust
15x8: 970W, 56A, 4151g static thrust
16x7: 1053W, 60A, 4259g static thrust

Performance Data (6S):
13x6.5: 896W, 42A, 3567g static thrust
13x8: 1042W, 50A, 4214g static thrust
14x7: 1170W, 56A, 4439g static thrust

DYS D2225/13 2000KV Brushless Outrunner Motor

Specs:
Battery: 2~3 Cell /7.4~11.1V
RPM: 2000kv
Max current: 11A
Max power: 122W
Internal resistance: 0.143 ohm
Weight: 32g (including connectors)
Diameter of shaft: 3.17mm
Dimensions: 22x25mm
Prop size: 6x4/6x5

DYS D2225/19 1350KV Brushless Outrunner Motor

Specs:
Battery: 2~3 Cell /7.4~11.1V
RPM: 1350kv
Max current: 8.2A
Max power: 105W
Internal resistance: 0.203 ohm
Weight: 32g (including connectors)
Diameter of shaft: 3.17mm
Dimensions: 22x25mm
Prop size: 6x5/7x3

This original SURPASS HOBBY RocketRC 4082 4-pole marine brushless motor is designed to provide both quality and performance at an affordable price. It is built using high-quality aluminum alloy and has been designed for use with 600~1000mm RC boats. Its high power and rotation speeds provide long run times without compromising performance. This motor is a perfect fit for the Traxxas M41 Catamaran Spartan.

Features:
• Hand-wound for maximum copper fill.
• Precision-balanced rotor
• Built from CNC machined 6061 T6 billet aluminum
• Super thin (0.2mm) laminations stator
• Fitted with a super efficient cooling-jacket

The Rocket Surpass range of brushless motors is precision-made using the latest manufacturing processes. The heatsink can is CNC machined from a solid billet of 6061 T6 aluminum, high-purity copper is used for the windings for improved efficiency, and oversized bearings are used for durability. The stator has super thin (0.2mm) laminations, and the rotor is then precision balanced for reliability, and ultra-smooth running at maximum RPMs.

The Rocket Surpass range of brushless motors is precision-made using the latest manufacturing processes. The heatsink can is CNC machined from a solid billet of 6061 T6 aluminum, high-purity copper is used for the windings for improved efficiency, and oversized bearings are used for durability. The stator has super thin (0.2mm) laminations, and the rotor is then precision balanced for reliability, and ultra-smooth running at maximum RPMs.

The Rocket Surpass 4076-2025KV motor has been specially built for 1/8th scale monster trucks and truggies. This 4-pole, 12-slot high-torque motor is water and dust-proof and features a universal mounting system to fit just about all 1/8th-scale vehicles.

The Rocket Surpass range of brushless motors is precision-made using the latest manufacturing processes. The can is CNC machined from a solid billet of 6061 T6 aluminum, high-purity copper is used for the windings for improved efficiency, and oversized bearings are used for durability. The stator has super thin (0.2mm) laminations, and the rotor is then precision balanced for reliability, and ultra-smooth running at maximum RPMs.

The Rocket Surpass 2822-1740KV motor suits sport, scale, and 3D-type models. This robust motor suits LiPo batteries from 2~3S, and a range of props from 4~6". This motor on test with a 3S battery gave 100W of power at 9.5A, making it a great motor for small models. The motor is supplied with a machined prop adapter, complete with mounting bolts, allowing it to be mounted either way round.

The Rocket Surpass range of brushless motors is precision-made using the latest manufacturing processes. The can is CNC machined from a solid billet of 6061 T6 aluminum, high-purity copper is used for the windings for improved efficiency, and oversized bearings are used for durability. The stator has super thin (0.2mm) laminations, and the rotor is then precision balanced for reliability, and ultra-smooth running at maximum RPMs.

The Rocket Surpass 2830-1130KV motor suits sport, scale, and 3D-type models. This robust motor suits LiPo batteries from 2~3S, and a range of props from 8~12". This motor on test with a 3S battery gave 200W of power at 19A, making it a great motor for small to medium size models. The motor is supplied with a machined prop adapter, complete with mounting bolts, allowing it to be mounted either way round.